利用有限元软件ANSYS模拟分析电极结构、压电陶瓷纤维厚度及体积分数等结构参数对纤维内部电场分布及复合物驱动应变性能的影响规律.结果表明:具有交叉指形电极结构的压电纤维复合物在纤维内部存在不均匀电场区域,其强度和体积分数共同制约着复合物的驱动应变性能.在恒定电场条件下,当交叉指形电极宽度为纤维厚度的一半时,复合物具有最大应变量；厚度较小的压电陶瓷纤维内部的均匀电场强度较高和体积分数较大,进而有利于提高复合物的驱动应变性能.在恒定电压条件下,电极指间距越大,复合物的驱动应变量越小.当指间距和指宽的比＞10时,应变量可达到理想状态的90％.压电陶瓷纤维体积分数越高的复合物越容易获得较大的驱动应变性能.
参考文献
| [1] | H. S. Tzou;H.-J. LEE;S. M. ARNOLD .Smart Materials, Precision Sensors/Actuators, Smart Structures, and Structronic Systems[J].Mechanics of Advanced Materials and Structures,2004(4/5 Pt.i):367-393. |
| [2] | 林萍华,陈静,芦笙,川岛弘一郎.声发射在形状记忆合金研究中的应用[J].中国有色金属学报,2001(06):1002-1008. |
| [3] | 贾菲B;林声和.压电离瓷[M].北京:科学出版社,1979:136-185. |
| [4] | HAGOOD N;KINDEL R;GHANDI K;GAUDENZI P.Improving transverse actuation of piezoceranmics using interdigitated surface electrodes[A].Albuquerque:SPIE,1993:341-352. |
| [5] | HAGOOD N;NESBITT W;BENT A A .Composites for structural control[P].USA,6048622,2000-04-11. |
| [6] | BENT A A;PIZZOCHERO A E.Recent advances in active fiber composites for structural control[A].San Diego:SPIE,2000:244-254. |
| [7] | TANG Li-hua;YANG Yao-wen;LI Hong-yun.Optimizing efficiency of energy harvesting by macro-fiber composites[A].Melbourne:SPIE,2008:7268081-7268089. |
| [8] | Seunghee Park;Benjamin L. Grisso;Daniel J. Inman .MFC-BASED STRUCTURAL HEALTH MONITORING USING A MINIATURIZED IMPEDANCE MEASURING CHIP FOR CORROSION DETECTION[J].Research in nondestructive evaluation: a journal of the American Society for Nondestructive Testing,2007(2):139-150. |
| [9] | MING Ai-guo;HUANG Ya-wen;FUKUSHIMA Y;SHIMOJO M.Development of an active flapping wing using piezoelectric fiber cornposites[A].,2008:2144-2149. |
| [10] | BENT A A .Active fiber composites for structural actuation[D].Massachusetts:Massachusetts Institute of Technology,1997. |
| [11] | Nelson LJ. .Smart piezoelectric fibre composites [Review][J].Materials Science and Technology: MST: A publication of the Institute of Metals,2002(11):1245-1256. |
| [12] | C.R. Bowen;A. Bowles .Fabrication and finite element modelling of interdigitated electrodes[J].Ferroelectrics: Letters Section,1999(1/4):257-269. |
| [13] | Wieland Beckert;Wolfgang S. Kreher .Modelling piezoelectric modules with interdigitated electrode structures[J].Computational Materials Science,2003(0):36-45. |
| [14] | C. R. Bowen;L. J. Nelson;R. Stevens;M. G. Cain;M. Stewart .Optimisation of interdigitated electrodes for piezoelectric actuators and active fibre composites[J].Journal of electroceramics,2006(4):263-269. |
| [15] | BELLOLI A;CASTELLI B;KORNMANN X;HUBER C,ERMANNI P.Modeling and characterization of active fiber omposites[A].San Diego:SPIE,2004:78-88. |
| [16] | ROLF PARADIES;MARK MELNYKOWYCZ .Numerical Stress Investigation for Piezoelectric Elements with a Circular Cross Section and Interdigitated Electrodes[J].Journal of Intelligent Material Systems and Structures,2007(9):963-972. |
| [17] | IEEE Std 176-1987.IEEE Std 176-1987.IEEE Standard on piezoelectricity[S]. |
| [18] | M. Martinez;A. Artemev .Finite Element Analysis Of Broken Fiber Effects On The Performance Of Active Fiber Composites[J].Composite Structures,2009(3):491-496. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%