The microstructure analysis and mechanical properties evaluation of laser beam welded AISI 409M ferritic stainless steel joints are investigated. Single pass autogeneous welds free of volumetric defects were produced at a welding speed of 3 000 mm/min. The joints were subjected to optical microscope, scanning electron fractographe, microhardness, transverse and longitudinal tensile, bend and charpy impact toughness testing. The coarse ferrite grains in the base metal were changed into dendritic grains as a result of rapid solidification of laser beam welds. Tensile testing indicates overmatching of the weld metal is relative to the base metal. The joints also exhibited acceptable impact toughness and bend strength properties.
参考文献
| [1] | Steel Authority of India Limited .AISI 409M Technical Data[R].Salem,2004. |
| [2] | Kalthauser R H.Source Book on the Ferritic Stainless Steel:Improving the Engineering Properties of Stainless Steels[M].Metals Park:ASM Engineering Bookshelf,1982 |
| [3] | Van Warmelo M;Nolan D;Norrish J .Mitigation of Sensitisation Effects in Unstabilised 12% Cr Ferritic Stainless Steel Welds[J].Materials Science and Engineering,2007,464A:157. |
| [4] | Toit M Du;Naude J.The Influence of Stabilization With Titanium on the Heat Affected Zone Sensitization of 11 to 12% Chromium Eerritic Stainless Steels Under Low Heat Input Welding Conditions[A].Singapore:IIW,2009:1. |
| [5] | Penasa M;Rivela C .Application of the Laser Welding Process to Low Thickness Stainless Steels[J].Welding International,2003,17:947. |
| [6] | Lee Hwa Teng;WU Jia-lin .The Effects of Peak Temperature and Cooling Rate on the Susceptibility to Intergranular Corro sion of Alloy 690 by Laser Beam and Gas Tungsten Arc Welding[J].Corrosion Science,2009,51:439. |
| [7] | Kell J;Tyrer JR;Higginson RL;Thomson RC .Microstructural characterization of autogenous laser welds on 316L stainless steel using EBSD and EDS.[J].Journal of Microscopy,2005(Pt.2):167-173. |
| [8] | WANG Li-xin;SONG Chang-jiang;SUN Feng-mei et al.Mi erostructure and Mechanical Properties of 12wt% Cr Ferritic Stainless Steel With Ti and Nb Dual Stabilization[J].Materials & Design,2009,30:49. |
| [9] | Meadows C;Fritz J D .Understanding Stainless Steel Heat Affected Zones[J].Welding Journal,2005,84:25. |
| [10] | Shanmugam K;Lakshminarayanan A K;Balasubramanian V .Tensile and Impact Properties of Shielded Metal Arc Welded Ferritic Stainless Steel Joints[J].Journal of Materials Science and Technology,2009,45:181. |
| [11] | Taban E;Deleu E;Dhooge A et al.Gas Metal Arc Welding of Modified X2CrNi12 Ferritic Stainless Steel[J].Kovove Mater Metall Mater,2007,45:67. |
| [12] | Tullmin M;Robinson F P A;Henning C A O et al.Proper ties of Laser-Welded and Electron-Beam Welded Ferritic Stain-less Steel[J].J S Air Inst Min Metal,1989,89:243. |
| [13] | Kaul R;Ganesh P;Nath A K et al.Comparison of Laser and Gas Tungsten Are Weldments of Stabilized 17wt% Cr Ferritic Stainless Steel[J].Materials and Manufacturing Processes,2003,18:563. |
| [14] | Taban E;Deleu E;Dhooge A et al.Laser Welding of Modified 12%Cr Stainless Steel:Strength,Fatigue,Toughness,Microstructure and Corrosion Properties[J].Materials & Design,2009,30:1193. |
| [15] | Grezev A N .Plasma Formation in Laser Welding[J].Welding International,2005,19:808. |
| [16] | Madhusudhan Reddy G;Mohandas T;Sambasiva Rao A et al.Influence of Welding Processes on Microstructure and Mechanical Properties of Dissimilar Austenitic-Ferritic Stainless Steel Welds[J].Materials and Manufacturing Processes,2007,20:147. |
| [17] | Madhusudan Reddy G;Srinivasa Rao K .Microstructure and Mechanical Properties of Similar and Dissimilar Stainless Steel Electron Beam and Friction Welds[J].International Journal of Advanced Manufacturing Technology,2009,45:875. |
| [18] | Rakesh. Kaul;P. Ganesh;A. K. Nath .CHARACTERIZATION AND COMPARISON OF LASER AND GAS TUNGSTEN ARC WELDMENTS OF AISI 430 STAINLESS STEEL[J].Metals materials and processes,2002(1):41-47. |
| [19] | Lippold J C;Kotecki D J.Welding Metallurgy and Weldability of Stainless Steels[M].New Jersey:John Wiley and Sons,2005 |
| [20] | Demo J J.Strueture and Constitution of Wrought Ferritic Stainless Steels in Handbook of Stainless Steels[M].Colum bus:McGraw-Hill Book Company,1977 |
| [21] | Topic M;Alien C;Tait R .The Effect of Cold Work and Heat Treatment on the Fatigue Behavior of 3Cr12 Corrosion Resistant Steel Wire[J].International Journal of Fatigue,2007,29:49. |
| [22] | Balmforth M C;Lippold J C .A New Ferritic Martensitic Stainless Steel Constitution Diagram[J].Welding Journal,2007,77:1s. |
| [23] | Madhusudhan Reddy G;Mohandas T .Explorative Studies on Grain Refinement of Ferritic Stainless Steel Welds[J].Journal of Materials Science Letters,2001,20:721. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%