欢迎登录材料期刊网

材料期刊网

高级检索

通过正交试验研究了用铁矿石和煤粉制造冷固结含碳球团的影响因素。考察了粘结剂的加入量、水含量、压球机的压力、压球机进料速度、压球速度、烘干温度和烘干时间对球团抗压强度的影响。结果表明:粘结剂加入量、烘干时间与水含量对球团的抗压强度影响最大,并进一步通过回归试验获得了这3个影响因素与球团抗压强度之间的回归方程。经验证,方程在一定范围内与试验结果符合较好。试验过程中获得的铁矿石冷固结含碳球团的最大抗压强度为2516.7N。

In order to clarify the influencing factors of cold-bonded molding ore/coal composite pellets made by iron ore and coal,orthogonal experiments were done to study the performance of ore/coal composite pellets through adjusting the binding agent content,moisture,pressure,feeding speed,molding speed,baking time and baking temperature.The results show that top three factors are binding agent content,baking time and moisture.A regression equation between that three factors and pellets′ compression strength was present by further experiments.The regression equation can meet experimental results with good effects.The maximum compression strength of ore/coal composite pellets is 2 516.7 N during cold-bonded molding experiments.

参考文献

[1] 胡俊鸽,吴美庆,毛艳丽.直接还原炼铁技术的最新发展[J].钢铁研究,2006(02):53-57.
[2] 黄洁.谈转底炉的发展[J].中国冶金,2007(04):23-25,58.
[3] Harada T;Tanaka H;Sugitasu H et al.FASTMET ProcessVerification for Steel Mill Waste Recycling[J].Kobelco Tech-nology Review,2001,24:26.
[4] 唐恩,周强,秦涔,阮建波.转底炉处理含铁原料的直接还原技术[J].炼铁,2008(06):57-60.
[5] 洪流,丁跃华,谢洪恩.钒钛磁铁矿转底炉直接还原综合利用前景[J].金属矿山,2007(05):10-13.
[6] 张旭,张建良,郭豪,柏凌.铁碳复合球团直接还原试验研究[J].矿冶工程,2009(02):55-58.
[7] 汪琦.铁矿含碳球团技术[M].北京:冶金工业出版社,2006
[8] 王常珍.冶金物理化学研究方法[M].北京:冶金工业出版社,2002
[9] 任露泉.回归设计及其优化[M].北京:科学出版社,2009
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%