以金红石型药芯焊丝为基础,通过在焊丝中加入不同含量的钛铁,研究了Ti对熔敷金属组织及力学性能的影响.结果表明,随焊丝钛含量的增加,脱氧方式从Ti、Si、Mn联合脱氧逐渐转为以Ti脱氧为主,且熔敷金属中夹杂物的Ti含量逐渐增大,同时熔敷金属中合金元素含量增加,屈服强度逐渐趋近抗拉强度,塑性变差.组织分析发现,以复合氧化物形式存在的化合钛对针状铁素体的形成有促进作用,以合金元素形式存在的固溶钛对针状铁素体的形成有抑制作用.
参考文献
| [1] | 李亚江;王娟;刘鹏.低合金钢焊接及工程应用[M].北京:化学工业出版社,2003:34-36. |
| [2] | Hasegawa T;Kasuya T;Kojima K et al.Flux cored wire for gas shielded arc welding of high strength steel[P].U.S.Patent Application 12/566,856,2009-9-25. |
| [3] | Ricks R A;Howell P R;Barritte G S .The nature of acicular ferrite in HSLA steel weld metals[J].Journal of Materials Science,1982,17(03):732-740. |
| [4] | J.-S. Byun;J.-H. Shim;Y.W. Cho .Non-metallic inclusion and intragranular nucleation of ferrite in Ti-killed C-Mn steel[J].Acta materialia,2003(6):1593-1606. |
| [5] | Young Joo Oh;Sang-Yoon Lee .Non-Metallic Inclusions and Acicular Ferrite in Low Carbon Steel[J].Materials transactions,2000(12):1663-1669. |
| [6] | J.-H. SHIM;Y. W. CHO .NUCLEATION OF INTRAGRANULAR FERRITE AT Ti2O3 PARTICLE IN LOW CARBON STEEL[J].Acta materialia,1999(9):2751-2760. |
| [7] | K.M. Wu .Three-Dimensional Analysis of Acicular Ferrite in a Low-Carbon Steel Containing Titanium[J].Scripta materialia,2006(4):569-574. |
| [8] | Yokomizo T.;Enomoto M.;Umezawa O.;Spanos G.;Rosenberg RO. .Three-dimensional distribution, morphology, and nucleation site of intragranular ferrite formed in association with inclusions[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):261-267. |
| [9] | Tae-Kyu LEE;H. J. KIM .Effect of Inclusion Size on the Nucleation of Acicular Ferrite in Welds[J].ISIJ International,2000(12):1260-1268. |
| [10] | Zhang Z;Farrar R A .Role of non-metallic inclusions in formation of acicular ferrite in low alloy weld metals[J].Materials Science and Technology,1996,12(03):237-260. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%