以Fe60自熔合金粉末和碳化钨粉末为原料,利用氧-乙炔火焰喷熔方法在45钢表面制备了碳化钨复合材料耐磨喷熔层;用扫描电子显微镜(SEM)、场发射扫描电镜(FEGSEM)和能量色散谱仪(EDS)等技术分析了喷熔层的显微组织结构;考察了复合喷熔层在磨粒磨损性能.结果表明:WC颗粒均匀分布在复合材料喷熔层组织中,其组织结构均匀并弥散分布着细小的硬质相;复合材料喷熔层在滑动干摩擦条件下表现出优异的耐磨粒磨损性能,碳化钨对喷熔层有显著的增强作用.
参考文献
[1] | 薛群基;党鸿辛 .摩擦学研究的发展概况[J].摩擦学学报,1993,13(01):73-80. |
[2] | 徐桂珍;刘家浚;周仲荣 .表面改性技术在微动摩擦学领域中的应用[J].摩擦学学报,1998,18:185-190. |
[3] | 李金桂.再论现代表面工程[J].中国表面工程,1998(03):1. |
[4] | 顾迅.现代表面技术的应用[J].金属热处理,1999(04):1-6. |
[5] | Kim HJ.;Hwang SY.;Lee CH.;Juvanon P. .Assessment of wear performance of flame sprayed and fused Ni-based coatings[J].Surface & Coatings Technology,2003(2/3):262-269. |
[6] | 张振宇,王智平,梁补女,苏义祥.NiCrBSiWCe合金粉末喷熔层滑动磨损特性研究[J].材料热处理学报,2007(06):114-117. |
[7] | Zhenyu Zhang;Zhiping Wang;Bunv Liang .Tribological properties of flame sprayed Fe-Ni-RE alloy coatings under reciprocating sliding[J].Tribology International,2006(11):1462-1468. |
[8] | Zhenyu Zhang;Zhiping Wang;Bunv Liang;Peiqing La .Effects of CeO{sub}2 on friction and wear characteristics of Fe-Ni-Cr alloy coatings[J].Tribology International,2006(9):971-978. |
[9] | Zhenyu Zhang;Zhiping Wang;Bunv Liang;H. B. Dong;S. V. Hainsworth .Effect of CeO{sub}2 on the microstructure and wear behavior of thermal spray welded NiCrWRE coatings[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2007(5/6):562-567. |
[10] | 于美杰,王成国,孙宏飞,徐勇,朱波.WC增强镍基复合喷焊层的组织与磨粒磨损性能研究[J].材料热处理学报,2006(03):116-120. |
[11] | Shan-Ping Lu;Oh-Yang Kwon;Yi Guo .Wear behavior of brazed WC/NiCrBSi(Co) composite coatings[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2003(5/6):421-428. |
[12] | B. Vamsi Krishna;V.N. Misra;P.S. Mukherjee .Microstructure and properties of flame sprayed tungsten carbide coatings[J].International Journal of Refractory Metals & Hard Materials,2002(5/6):355-374. |
[13] | Hui Wang;Weiming Xia;Yuansheng Jin .A Study on abrasive resistance of Ni-hased coatings with a WC hard phase[J].Wear,1996,195:47-52. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%