A new design of copper-bearing non-quenched plastic mold steel is presented and explained. Two kinds of microstrueture can be obtained from this new type copper-bearing steel via cooling with different cooling rates, bain- ite and a mixed microstructure consisting of ferrite and bainite. It is found that, after proper tempering process, the hardness will be increased. Moreover, the hardness difference between different microstructures will be reduced. For further investigation, the samples tempered at different temperatures were examined by XRD and 3PAP (three di- mensional atom probe) analysis. Results show that the improvement is contributed mainly by the precipitation of Cu phase and transformation of residual austenite.
参考文献
| [1] | Luo Y;Wu XC;Wang HB;Min YA .Study on microstructure and hardness uniformity of non-quenched prehardened steel for large section plastic mould[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):205-210. |
| [2] | WU Xiao-chun;ZHANG Jie;CUI Kun .The Microstructure and Mechanical Properties of Unquenched and Untempered Die Steel for Plastic Moulding[J].Journal of Huazhong University of Science and Technology,1995,23(12):1. |
| [3] | JIANG Lai-zhu;WANG Jian-hui .Continuous Cooling Trans-formation of Hot Deformed Austenite for a Non Quenched and Tempered Bainite Steel for Plastic Mould[J].Iron & Steel,1999,34(10):1117. |
| [4] | LUO Yi;WU Xiao ehun;MIN Yong-an.Microstructure and Properties of Big Section Microalloyed Steel in Unquenched and Untempered for Moulds[A].Torino,Italy:World Scientific Publishing Corporation,2006:123. |
| [5] | LUO Yi;WU Xiao-chun .Research Progress of the Work on Prehardened Plastic Mould Steel[J].Heat Treatment of Met als,2007,32(12):24. |
| [6] | LUO Yi,WU Xiao-chun,MIN Yong-an,ZHU Zhu,WANG Hong-bin.Development of Non-Quenched Prehardened Steel for Large Section Plastic Mould[J].钢铁研究学报（英文版）,2009(02):61-67. |
| [7] | Ghosh SK;Haldar A;Chattopadhyay PP .Effect of copper additions in directly quenched titanium-boron steels[J].Journal of Materials Science,2007(22):9453-9459. |
| [8] | Ghosh S K;Haldar A;Chattopadhyay P P .On the Cu Precipi-tation Behavior in Thermomechanically Processed Low Carbon Microalloyed Steels[J].Materials Science and Engineering,2009,519A(1/2):88. |
| [9] | Arindam Ghosh;Samar das;Subrata Chatterjee .Ageing behavior of a Cu-bearing ultrahigh strength steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):152-157. |
| [10] | Aimin Guo,Xinli Song,Jinquan Tang,Zexi Yuan.Effect of tempering temperature on the mechanical properties and microstructure of an copper-bearing low carbon bainitic steel[J].北京科技大学学报（英文版）,2008(01):38-42. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%