This paper reports some results obtained in an investigation to see how increasing the corundum dispersoid content from o% to 7% in a matrix of hiduminium alloy affects the tensile and compressive strengths, the hardness and the casting characteristics of the composite. The results show that as the corundum content is increased, ultimate tensile strength (UTS)- compressive strength and hardness increase remarkably, whereas fluidity of the molten composite during casting drops significantly. It was found that just a minute amount of corundum is sufficient to cause a fairly large change in the mechanical properties and the fluidity of the molten material.This drop in castability is one of the reasons why adding corundum beyond 7 percent is not recommended. If other factors are kept constant, the fluidity is seen to slightly improve if the pouring temperature of the molten metal were increased from 670 to 710℃
参考文献
| [1] |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%