The machinability of 4Cr13 steel was improved obviously by adding Cu and S. The effect of copper addition on the machinability of 4Cr13 was similar to that of sulphur addition. By means of SEM, EBSD, and HREM, the distribution and size of the free cutting phase in the steel 4Cr13Cu were studied. The results showed that the free cutting phase was copperrich phase. The copperrich phases dispersed in the steel and were determined to have about 10 nm in diameter. The content of copper in the copperrich phase was over 70%.
参考文献
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%