采用丝网印刷方法制备钡铁氧体永磁厚膜,研究了热压烧结对钡铁氧体厚膜性能的影响.XRD结果表明,在常压烧结和热压烧结的样品中均有明显的BaFe12O19衍射峰.与常压烧结相比,热压烧结的样品表面孔洞明显减少,致密性得到了很大的提高.并且热压烧结的样品磁性能也有明显的提高,其剩磁比可达0.71,矫顽力达到304.1kA/m,而常压烧结样品剩磁比和矫顽力仅为0.51和278.8kA/m.
参考文献
[1] | Harris V G;Chen Z H;Chen Y J et al.[J].Journal of Applied Physics,2006,99:1. |
[2] | Yanko A K .The Morphological,Structural and Physical Properties of Ultra-Thick c-axis Oriented Barium Ferrite Films[D].Idaho:University of Idaho,2006. |
[3] | Martha P H .[J].Journal of Magnetism and Magnetic Materials,2000,215-216:171-183. |
[4] | Stéphane C;Thomas R;Martine L B et al.[J].IEEE Transactions on Componets and Packaging Tecnologies,2007,30:3. |
[5] | Harvey S N;Denis C W;Clifford M K .[J].PROCEEDINGS OF THE SPIE,1996,2842:181-191. |
[6] | Shindea S R;Ramesh R;Lofland S E .[J].Applied Physics Letters,1998,72:3443. |
[7] | Wang S G;Yoon S D;Vittoria C .[J].Applied Physics Letters,2002,92:6728. |
[8] | Chen Y;Sakai T;Chen T et al.[J].Applied Physics Letters,2006,88:062516. |
[9] | Stoner E C;Wohlfarth E P.Phil Trans[M].London A:R.Soc,1948:599. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%