欢迎登录材料期刊网

材料期刊网

高级检索

主要综述了近年来镁合金摩擦磨损的研究现状,分析并对比了不同成分的镁合金的摩擦磨损性能,讨论了不同的磨损机理及其他摩擦磨损现象,总结了载荷、速度和温度等实验条件与摩擦磨损间的关系,以及材料自身因素对镁合金摩擦磨损的影响.

参考文献

[1] 温诗铸.材料磨损研究的进展与思考[J].摩擦学学报,2008(01):1-5.
[2] 丁雨田,刘孝根,金培鹏,段望春,王府.镁基复合材料磨损性能研究进展[J].机械研究与应用,2008(01):24-26.
[3] 张莉,王渠东,丁文.镁基材料摩擦磨损的研究进展[J].材料导报,2011(05):94-96,105.
[4] 丁雨田,刘孝根,金培鹏,段望春,王府.镁基复合材料磨损性能研究进展[J].机械研究与应用,2008(01):24-26.
[5] 黄晓锋,朱凯,曹喜娟.主要合金元素在镁合金中的作用[J].铸造技术,2008(11):1574-1578.
[6] Habibnejad-Korayem M;Mahmudi R;Ghasemi H M et al.Tribological behavior of pure Mg and AZ31 magnesium alloy strengthened by Al2O3 nano-particles[J].Wear,2010,268(3-4):405.
[7] 赵旭,黄维刚,郑天群,王燕.镁合金AZ31的磨损性能研究[J].材料工程,2008(05):1-3.
[8] S. Das;A. T. Morales;A. T. Alpas .Microstructural evolution during high temperature sliding wear of Mg-3% Al-1% Zn (AZ31) alloy[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2010(1/2):94-103.
[9] Zafari A;Ghasemi H M;Mahmudi R .Tribological behavior of AZ91D magnesium alloy at elevated temperatures[J].Wear,2012,292-293:33.
[10] Asl K M;Tari A;Khomamizadeh F .Effect of deep cryogenic treatment on microstructure,creep and wear behaviors of AZ91 magnesium alloy[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2009,523(1-2):27.
[11] H. Chen;A. T. Alpas .Sliding wear map for the magnesium alloy Mg-9Al-0.9Zn (AZ91)[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2000(1/2):106-116.
[12] Wang S Q;Yang Z R;Zhao Y T et al.Sliding wear characteristics of AZ91D alloy at ambient temperatures of 25-200 ℃[J].Tribology Letters,2010,38:39.
[13] 黄伟九,林强,刘成龙.AZ71E镁合金的高温摩擦学行为[J].中国有色金属学报(英文版),2012(09):2057-2065.
[14] Naing Naing Aung;Wei Zhou;Lennie E. N. Lim .Wear behaviour of AZ91D alloy at low sliding speeds[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2008(5/6):780-786.
[15] El-Morsy AW .Dry sliding wear behavior of hot deformed magnesium AZ61 alloy as influenced by the sliding conditions[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):330-335.
[16] 杨子润,魏敏先,赵玉涛,王树奇.AM60B合金在25~200℃下干滑动磨损行为和磨损机制[J].中国有色金属学报(英文版),2011(12):2584-2591.
[17] Guo W;Wang Q;Ye B et al.Enhanced microstructure homogeneity and mechanical properties of AZ31-Si composite by cyclic closed-die forging[J].Journal of Alloys and Compounds,2013,552:409.
[18] Ajith Kumar K K;Pillai U T S;Pai B C et al.Dry sliding wear behaviour of Mg-Si alloys[J].Wear,2013,303(1-2):56.
[19] 林强,黄伟九,王国.AS41耐热镁合金的摩擦学行为研究[J].轻合金加工技术,2010(05):46-49.
[20] D. S. Mehta;S. H. Masood;W. Q. Song .Investigation of wear properties of magnesium and aluminum alloys for automotive applications[J].Journal of Materials Processing Technology,2004(0):1526-1531.
[21] Bin Hu .Effect of solidification conditions on microstructure, mechanical and wear properties of Mg-5Al-3Ca-0.12Sr magnesium alloy[J].Materials & design,2010(8):P.3901.
[22] Takashi M;Kazuhiko S;Toshiji M et al.Effects of the grain size on friction and wear properties of ZK60 magnesium alloy[J].Journal of the Society of Materials Science Japan,2002,51(10):1154.
[23] 祁庆琚.含稀土镁合金的摩擦磨损性能[J].中国有色金属学报,2006(07):1219-1226.
[24] Meshinchi Asl K;Masoudi A;Khomamizadeh F .The effect of different rare earth elements content on microstructure,mechanical and wear behavior of Mg-Al-Zn alloy[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2010,527(7-8):2027.
[25] Somekawa, H.;Maeda, S.;Hirayama, T.;Matsuoka, T.;Inoue, T.;Mukai, T..Microstructural evolution during dry wear test in magnesium and Mg-Y alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2013:371-377.
[26] Liu Y;Shao S;Xu C et al.Enhancing wear resistance of Mg-Zn-Gd alloy by cryogenic treatment[J].Materials Letters,2012,76:201.
[27] S. Anbu selvan;S. Ramanathan .Dry sliding wear behavior of as-cast ZE41A magnesium alloy[J].Materials & design,2010(4):1930-1936.
[28] Selvan S A;Ramanathan S .Dry sliding wear behavior of hot extruded ZE41A magnesium alloy[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2010,527(7-8):1815.
[29] López A J;Rodrigo P;Torres B et al.Dry sliding wear behaviour of ZE4 1A magnesium alloy[J].Wear,2011,271(11-12):2836.
[30] Hu M;Wang Q;Chen C et al.Dry sliding wear behaviour of Mg-10Gd-3Y-0.4Zr alloy[J].Materials & Design,2012,42:223.
[31] 胡茂良,王渠东,李程,丁文江.Mg-11Y-5Gd-2Zn镁合金干滑动的摩擦磨损行为[J].中国有色金属学报(英文版),2012(08):1918-1923.
[32] He S M;Zeng X Q;Peng L M et al.Precipitation in a Mg10Gd-3Y-0.4Zr (wt.%) alloy during isothermal ageing at 250 ℃[J].Journal of Alloys and Compounds,2006,421(1-2):309.
[33] D.D. Yin;Q.D. Wang;Y. Gao .Effects of heat treatments on microstructure and mechanical properties of Mg-11Y-5Gd-2Zn-0.5Zr (wt.%) alloy[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2011(5):1696-1704.
[34] 祁庆琚,刘勇兵,杨晓红.稀土对镁合金AZ91D摩擦磨损性能的影响[J].中国稀土学报,2002(05):428-432.
[35] 宋波 .AM60镁合金的稀土改性及摩擦磨损行为研究[D].长春:吉林大学,2006.
[36] J. An;R. G. Li;Y. Lu;C. M. Chen;Y. Xu;X. Chen;L. M. Wang .Dry sliding wear behavior of magnesium alloys[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2008(1/2):97-104.
[37] Itoi T;Gonda K;Hirohashi M .Relationship of wear properties to basal-plane texture of worn surface of Mg alloys[J].Wear,2011,270(9-10):606.
[38] Meng H C;Ludema K C .Wear models and predictive equations:Their form and content[J].Wear,1995,181-183:443.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%