采用一种快速求解三维粘性流场的计算方法求解跨音速轴流压气机级内部流场及全工况特性.该方法以LU-SGS-GE隐式格式和MUSCL TVD迎风格式为基础,结合壁面函数方法和简单的混合长度湍流模型,对三维可压缩雷诺平均Navie-Stokes方程进行求解.叶列间参数的传递采用混合平面方法并应用了微机网络并行计算技术.计算得到了NASA 37号低展弦比、跨音速轴流压气机级70%设计转速下的全工况性能曲线,并重点分析了其中一些典型工况下的内部流场.计算与实验结果的对比表明此方法能快速得到三维粘性流场的流动特性且计算精度较高,可用来模拟跨音速轴流压气机级内的全工况三维粘性流动.
参考文献
| [1] | Denton J D .The Calculation of Three-Dimensional Viscous Flow ThroughMultistage Turbomachinery[J].Journal of Turbomachinery,Transactions of the ASME,1992,114:18-26. |
| [2] | Xin Yuan;Hisaaki Daiguji .A specially combined lower-upper factored implicit scheme for three-dimensional compressible Navier-Stokes equations[J].Computers & Fluids,2001(3):339-363. |
| [3] | Daiguji H;Yuan Xin;Yamamoto S .Stabilization of Higher-Order High Resolution Schemes for the Compressible Navier-Stokes Equations[J].International Journal of Numerical Methods for Heat and Fluid Flow,1997,7(07):250-274. |
| [4] | 张宏武 .透平级全工况气动性能的全三维粘性数值模拟[D].清华大学,2000. |
| [5] | 姚征 Ch H .多级叶轮机三维流动计算的级间混合方法分析[J].工程热物理学报,1996,17(04):417-422. |
| [6] | Moore R D;Reid L.Performance of Single-Stage AxialFlow Transonic Compressor with Rotor and Stator Aspect Ratios of 1 19 and 1.26[M].Respectively and with Design Pressure Ratio of 2.05. NASA-TP-1659,1980 |
| [7] | Reid L;Moore R D.Design and Overall Performance of Four Highly Loaded High-Speed Inlet Stages for and Advanced High-Pressure-Ratio Core Compressor NASATP-1337[M].,1978 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%