通过研究高碳钢小方坯连铸参数对铸坯二次枝晶臂间距的影响发现:采用结晶器电磁搅拌、加大二冷比水量,二次枝晶臂间距减小;过热度升高、拉速增大,二次枝晶臂间距增大.无M-EMS的铸坯接近中心的区域,仍然是枝晶臂发达的柱状晶组织;采用结晶器电磁搅拌,促使铸坯中心区域形成粒状等轴晶组织;随搅拌电流增大,二次枝晶间距明显减小.随二次枝晶臂间距增大,渗透率增加,造成铸坯中心碳偏析加重.
参考文献
| [1] | J·里摩吉斯,L·贝特尔曼,白静.二次冷却和结晶器电磁搅拌对高碳钢碳偏析及其凝固结构的影响[J].天津冶金,2002(04):40-45. |
| [2] | Chakraborty S .Effects of Dendritic Arm Coarsening on Macroscopic Modeling of Solidification of Binary Alloys[J].Materials Science and Technology,2001,17(12):1531. |
| [3] | Yoo H.Effect of Anisotropic Permeability on the Transport Process During Solidification of Binary Mixture[J].International Journal of Heat and Mass Transfer,1992(35):2335. |
| [4] | Poirier D R.Permeability for Flow of Dendritic Liquid in Columnar Dendrite Alloys[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,1987(18):245. |
| [5] | Carman P C.Flow of Gases Through Porous Media[M].London:Butter Worth Scientific Publications,1956 |
| [6] | Ahmad N .Numerical Simulation of Macro Segregation:a Comparison Between Finite Volume Method and Finite Element Method Predictions and a Confrontation With Experiments[J].Metallurgical and Materials Transactions B:Process Metallurgy and Materials Processing Science,1998,29(01):617. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%