在立式感应加热的氮化物MOCVD反应室中, 提出了一种刻槽结构的基座;利用有限元法,给出了使衬底温度分布最均匀的槽的位置和大小.与传统的基座相比,这种刻槽优化后的基座,使衬底温度分布的均匀性显著提高.另外,通过对基座温度随加热时间变化的分析,发现刻槽基座的热传导规律,即刻的槽改变了基座中感应产生热量的热传导方向,衬底中的热量是由槽上下基座部分传递而来的,且随时间的增大,基座的温度趋于恒定,衬底的温度趋于均匀,均匀的衬底温度有利于提高生长薄膜的质量.
参考文献
[1] | Pearton S J;Ren F;Zhang A P et al.Fabrication and Performance of GaN Electronic Devices[J].Materials Science and Engineering,2000,30:55-212. |
[2] | Liu Ci-Hui,Liu Bing-Ce,Fu Zhu-Xi.Electrical and deep levels characteristics of ZnO/Si heterostructure by MOCVD deposition[J].中国物理B(英文版),2008(06):2292-2296. |
[3] | Fotiadis D I;Kieda S;Jensen K F .Transport Phenomena in Vertical Reactors for Metalorganic Vapor Phase Epitaxy[J].Journal of Crystal Growth,1990,102:441-470. |
[4] | Fotiadis D I;Boekholt M;Jensen K F et al.Flow and Heat Transfer in CVD Reactors:Comparison of Raman Temperature Measurements and Finite Element Model Predictions[J].Journal of Crystal Growth,1990,100:577-599. |
[5] | Zuo R;Zhang H;Liu XL .Transport phenomena in radial flow MOCVD reactor with three concentric vertical inlets[J].Journal of Crystal Growth,2006(2):498-508. |
[6] | 钟树泉,任晓敏,王琦,黄辉,黄永清,张霞,蔡世伟.MOCVD反应器热流场的数值模拟研究[J].人工晶体学报,2008(06):1342-1348. |
[7] | 徐谦,左然,张红.反向流动垂直喷淋式MOCVD反应器设计与数值模拟[J].人工晶体学报,2005(06):1059-1064. |
[8] | Q.-S. Chen;P. Gao;W.R. Hu .Effects of induction heating on temperature distribution and growth rate in large-size SiC growth system[J].Journal of Crystal Growth,2004(1/3):320-326. |
[9] | 蒲红斌,陈治明,李留臣,封先锋,张群社,沃立民,黄媛媛.用热壁CVD法在SiC衬底上生长SiCGe合金的热场分析与设计[J].人工晶体学报,2004(05):712-716. |
[10] | 张群社,陈治明,李留臣,蒲红斌,封先锋,陈曦.不同耦合间隙对大直径SiC晶体生长感应加热系统的影响[J].人工晶体学报,2006(04):781-784. |
[11] | Li Zhi-Ming,Hao Yue,Zhang Jin-Cheng,Xu Sheng-Rui,Ni JinYu.Analysis and finite element simulation of electromagnetic heating in the nitride MOCVD reactor[J].中国物理B(英文版),2009(11):5072-5077. |
[12] | Li Zhiming,Xu Shengrui,Zhang Jincheng,Chang Yongming,Ni Jingyu,Zhou Xiaowei,Hao Yue.Finite element analysis of the temperature field in a vertical MOCVD reactor by induction heating[J].半导体学报,2009(11):26-30. |
[13] | Hsiao-Yung Chang;Raymond A.Adomaitis .Influence of gas composition on wafer temperature in a tungsten chemical vapor deposition reactor: Experimental measurements, model development, and parameter identification[J].Journal of Vacuum Science & Technology, B. Microelectronics and Nanometer Structures: Processing, Measurement and Phenomena,2001(1):230-238. |
[14] | Hirasawa;Shigeki;Maruyama et al.Analysis of Gas Convection and Temperature Distribution in a Rotating Wafer in a Cylindrical Lamp Heating Apparatus[J].American Society of Mechanical Engineers Heat Transfer Division,2002,372:45. |
[15] | Olaf Klein;Peter Philip .Transient numerical investigation of induction heating during sublimation growth of silicon carbide single crystals[J].Journal of Crystal Growth,2003(1/2):219-235. |
[16] | Lide D R.CRC Handbook of Chemistry and Physics[M].Boca Raton USA,1995:267. |
[17] | Akira Hirako;Kazuhiro Ohkawa .Effect of thermal radiation and absorption in GaN-MOVPE growth modeling on temperature distribution and chemical state[J].Journal of Crystal Growth,2005(1/2):57-63. |
[18] | Thermal transportation simulation of a susceptor structure with ring groove for the vertical MOCVD reactor[J].Journal of Crystal Growth,2009(23/24):4679. |
[19] | 约翰?戴维斯;彼得?辛普森.感应加热手册[M].北京:国防工业出版社,1985:416-418. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%