制备了帽型、泡型、工字型三种夹芯结构复合材料,研究三种夹芯结构在弯曲载荷下的响应行为,并利用有限元的方法研究夹芯结构在弯曲载荷下Von-Mises应力分布,利用Tsai-Hill屈服准则判定有限元模型的屈服情况,观察发生屈服的区域.结果表明,帽型夹芯结构具有最大的弯曲刚度与抗弯强度.三种夹芯结构发生破坏的区域不同,帽型夹芯结构破坏主要出现在压头区域、上面板的压头边缘区域、芯子压头正下方的拐角处;泡型夹芯结构破坏出现在芯子支撑区域;工字型夹芯结构破坏出现在下面板支撑区域.
参考文献
| [1] | 李晓宇;王佩艳;李祚军;谯盛军.碳纤维/PMI泡沫夹芯复合材料的弯曲特性分析[J].科学技术与工程,2013(5):1261-1265. |
| [2] | 陈启军 .复合材料飞轮转子的失效分析与强度预测[D].郑州大学,2014. |
| [3] | Zhibin Li;Zhijun Zheng;Jilin Yu;Chunqiang Qian;Fangyun Lu.Deformation and failure mechanisms of sandwich beams under three-point bending at elevated temperatures[J].Composite structures,2014May(May):285-290. |
| [4] | 张志峰 .先进复合材料格栅加筋结构优化设计与损伤分析[D].大连理工大学,2008. |
| [5] | 刘勇;陈世健;高鑫;康兴无.基于Hashin准则的单层板渐进失效分析[J].装备环境工程,2010(1):34-39. |
| [6] | Jin Zhang;Peter Supernak;Simon Mueller-Alander;Chun H. Wang.Improving the bending strength and energy absorption of corrugated sandwich composite structure[J].Materials & design,2013Dec.(Dec.):767-773. |
| [7] | Peiyan Wang;Yin Lei;Zhufeng Yue.Experimental and numerical evaluation of the flexural properties of stitched foam core sandwich structure[J].Composite structures,2013Jun.(Jun.):243-248. |
| [8] | Machining FEM model of long fiber composites for aeronautical components[J].Composite structures,20103(3):691. |
| [9] | Chun Lu;Ping Chen;Qi Yu.Thermal Residual Stress Distribution in Carbon Fiber/Novel Thermal Plastic Composite[J].Applied composite materials,20083(3):157-169. |
| [10] | Jian Xiong;Li Ma;Ariel Stocchi;Jinshui Yang;Linzhi Wu;Shidong Pan.Bending response of carbon fiber composite sandwich beams with three dimensional honeycomb cores[J].Composite structures,2014Feb.(Feb.):234-242. |
| [11] | Gefu Ji;Zhenyu Ouyang;Guoqiang Li.Debonding and impact tolerant sandwich panel with hybrid foam core[J].Composite structures,2013Sep.(Sep.):143-150. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%