After 2% predeformation, the baking treatment with different schedule was carried out for low silicon TRIP steel sheet with niobium. The effects of baking temperature and time on microstructures and mechanical prop-erties were investigated. The results showed that with increasing the baking temperature and time, the volume frac-tion of retained austenite decreases, and the volume fraction of tempered martensite increases; as baking temperature ranges from 80 ℃ to 170 ℃, the bake-hardening (BH) value increases obviously, while from 170 ℃ to 230 ℃, the variation of BH value is very slight; as baking time ranges from 2 min to 20 min, the BH value increases significantly,while the BH value decreases when baking time exceeds 20 min. So that when the baking temperature is 170 ℃ and the baking time is 20 min, the low silicon TRIP steel sheet exhibits good bake-hardening behavior, and the highest BH value is above 70 MPa.
参考文献
[1] | Lin LI,P.Wollants,Zuyao XU,B.C.De Cooman,Xiaodong ZHU.Effects of Alloying Elements on the Concentration Profile of Equilibrium Phases in Transformation Induced Plasticity Steel[J].材料科学技术学报(英文版),2003(03):273-277. |
[2] | Verlinden B;Bocher P;Girauh E et al.Austenite Texture and Bainite/Austenite Orientation Relationships in TRIP Steel[J].Aeroudt:Scripta Materialia,2001,45:909. |
[3] | Pereloma E V;Timokhina I B;Hodgson P D et al.Transformation Behaviour in Thermomechanically Processed C-Mn-Si TRIP Steels With and Without Nb[J].Materials Science and Engineering,1999,273-275A:448. |
[4] | Yingkui GUO,Yu ZHOU,Dongbo LI,Xiaoming DUAN,Tingquan LEI.Microstructure and Performance of 2Y-PSZ/TRIP Steel Composites[J].材料科学技术学报(英文版),2003(02):137-140. |
[5] | Tang Z Y;Ding H;Du L X et al.Study on Microstructures and Mechanical Properties of Si-Al-Mn TRIP Steel With Niobium[J].Journal of Materials Science and Technology,2007,23(06):790. |
[6] | Yu CHEN,Guoyi TANG,Fangyu CHEN,Pinghe LI,Sunbing ZHOU.Research on Retained Austenite for Advanced Aluminum-containing Hot-rolled TRIP Steel[J].材料科学技术学报(英文版),2005(06):813-816. |
[7] | Girault E;Jacques P;Harlet P et al.Metallographic Methods for Revealing the Multiphase Microstructure of TRIP-Assisted Steels[J].Materials Characterization,1998,40:111. |
[8] | Cock T D;Ferrer J P;Capdevila C et al.Austenite Retention in Low Al/Si Multiphase Steels[J].Scripta Materialia,2006,55:441. |
[9] | Bleck W;Frehn A;Kechagias E et al.Control of Microstructure in TRIP Steels by Niobium[J].Materials Science Forum,2003,426-432:43. |
[10] | A. Rusinek;J.R. Klepaczko .Experiments On Heat Generated During Plastic Deformation And Stored Energy For Trip Steels[J].Materials & design,2009(1):35-48. |
[11] | Kaneko S;M'atsuoka S;Sakata K .Strengthening Mechanism in Hot-Rolled High Strength Sheet With Increase in Tensile Strength Induced by Bake Hardening[J].Journal of the Iron & Steel Institute of Japan,2003,89(10):1057. |
[12] | Lin LI,B.C.De Cooman,P.Wollants,Yanlin HE,Xiaodong ZHOU.Effect of Aluminum and Silicon on Transformation Induced Plasticity of the TRIP Steel[J].材料科学技术学报(英文版),2004(02):135-138. |
[13] | Sugimoto K I;Muramatsu T;Hashimoto S I.Formability of Nb Bearing Ultra High-Strength TRIP-Aided Sheet Steels[J].Journal of Materials Processing Technology,2006:177. |
[14] | Yu CHEN,Guoyi TANG,Haoyang TIAN,Feipeng LI,Yu ZHANG,Lihui WANG,Zhaojun DENG,Dexing LUO.Microstructures and Mechanical Properties of Nb-Ti Bearing Hot-rolled TRIP Steels[J].材料科学技术学报(英文版),2006(06):759-762. |
[15] | Kaneko S;Matsuoka S;Sakata K .Strengthening Mechanism in Hot-Rolled High Strength Sheet With Increase in Tensile Strength Induced by Bake Hardening[J].Journal of the Iron & Steel Institute of Japan,2003,89(10):1057. |
[16] | Kaneko S;Hiramoto J;Ishikawa T.Development of HotRolled Sheet Steel With Significantly Increased Tensile Strength Induced by Strain Age Hardening[J].Kawasaki Steel Technical Report,2003(35):28. |
[17] | Hiroshi M;Fusato K;Kohei H .Metallurgy of Continuously Annealed High Strength TRIP Steel Sheet[J].Steel Research International,2002,73(06):211. |
[18] | Girault E;Jacques P;Harlet P .Metallographic Methods for Revealing the Multiphase Microstructure of TRIP-Assisted Steels[J].Materials Characterization,1998,40(02):111. |
[19] | Furnemont Q.;Kempf M.;Jacques PJ.;Goken M.;Delannay F. .On the measurement of the nanohardness of the constitutive phases of TRIP-assisted multiphase steels[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):26-32. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%