欢迎登录材料期刊网

材料期刊网

高级检索

  针对国产9Ni钢,对其进行焊接及热处理工艺制定。采用多层多道手工电弧焊,焊条为ENiCrMo-3,焊前不预热且严格控制层间温度;选择双相区处理工艺。通过高低温拉伸试验、低温冲击试验、硬度测试及金相组织观察检测焊接接头性能。结果表明,9Ni钢接头低温冲击韧性和抗拉强度均满足要求,对其制定的焊接和热处理工艺切实可行。

The welding and heat treatment process of the 9% Ni steel were investigated. SMAW was employed as the joining technique and ENiCrMo?3 as the welding material. Multi?pass welding and low inter?pass temperature were also applied as well as the QLT(quenching+intercritical quenching+tempering)heat treatment process. The welded joints were investigated by high and low temperature tensile test,low temperature impact test,hardness test and optical microscope. The results show that the impact toughness and tensile strength meet the requirement,which proves that the welding and heat treatment process are feasible and practical.

参考文献

[1] 刘东风,杨秀利,侯利锋,崔天燮,胡玉亭,卫英慧.液化天然气储罐用超低温9Ni钢的研究及应用[J].钢铁研究学报,2009(09):1-5.
[2] 孟祥敏;李光来;张弗天 等.9Ni钢中马氏体间规则界面结构的电镜研究[J].金属学报,1998,34(06):565-570.
[3] 孟祥敏;李光来;张弗天 等.9Ni钢中马氏体的小角倾斜晶界[J].金属学报,1996,32(07):700-703.
[4] Hyung-Stop Shin;Hae-Moo Lee;Moon-Saeng Kim .Impact ten-sile behaviors of 9% nickel steel at low temperature[J].Inter-national Journal of Impact Engineering,2000,24(6/7):571-581.
[5] Jan Hikes;Fred Nessen .Welding 9% nickel steel for liquefied natural gas(LNG)application[J].Welding and Cutting,2007,6(02):103-111.
[6] 吕立博,向青春,左晓姣,刘政军,张立,刘向东,王菡.1Ni9钢在乙烯压缩机上的应用[J].风机技术,2010(04):36-38,44.
[7] 谢章龙,刘振宇,王国栋.热处理工艺对9Ni钢组织与性能的影响[J].金属热处理,2010(06):37-42.
[8] 王酒生,刘振宇,谢章龙,杨哲.9Ni钢在线热处理工艺开发[J].太原科技大学学报,2008(05):377-379.
[9] 王国平,陈学东,王冰.超低碳9Ni钢焊接接头低温韧性[J].焊接学报,2008(03):37-40.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%