研究了采用冷轧复合法制备Mg-Li合金复铝板的工艺,得到了适宜的轧制制度与退火热处理参数,结果表明轧制压下率在60%～65%时复合效果最佳.退火时Mg-Li合金内的α相发生了明显的球化转变,300℃退火1 h后Mg-Li合金的再结晶过程基本完成.Mg-Li合金复铝板的密度为1.6～1.7 g/cm3,具有显著的轻质特点、而耐蚀性较单一Mg-Li合金显著提高.
参考文献
| [1] | Rao T V;Bhat M V;Sastry D H .[J].British Corrosion Journal,1996,31(01):44-48. |
| [2] | Saito N;Mabuchi M;Nakanishi M et al.[J].Scripta Materialia,1997,36(05):551-555. |
| [3] | Inoue M;Matsuzawa K;Tanno O .[J].Journal of Japan Institute of Light Metals,1992,42(02):67-73. |
| [4] | 马春江;张荻;覃继宁 等.[J].中国有色金属学报,2000,10(z1):10-14. |
| [5] | Meng-Chang Lin;Jim-Yen Uan .Preparation of Mg-Li-Al-Zn Master Alloy in Air by Electrolytic Diffusing Method[J].Materials transactions,2005(6):1354-1359. |
| [6] | Hatta K;Zaizhe L;Kamado S et al.[J].Journal of Japan Institute of Light Metals,1995,45(12):702-707. |
| [7] | Atsushi Yamamoto;Tetsuya Ashida;Yoshio Kouta .Precipitation in Mg-(4-13) percent Li-(4-5) percent Zn Ternary Alloys[J].Materials transactions,2003(4):619-624. |
| [8] | Nikulin L V;Shverikuko S B;Belozerova E V .[J].Metal Science and Heat Treatment,1987,29(3-4):225-229. |
| [9] | Takuda H.;Matsusaka H.;Kikuchi S.;Kubota K. .Tensile properties of a few Mg-Li-Zn alloy thin sheets[J].Journal of Materials Science,2002(1):51-57. |
| [10] | Wang J Y;Hong W P;Hsu C C et al.[J].Materials Science Forum,2003,419-422(01):165-170. |
| [11] | 乐启炽,崔建忠,李红斌,张新建.Mg-Li合金研究最新进展及其应用[J].材料导报,2003(12):1-4,8. |
| [12] | 冯林平,陈斌,钟皓,刘培英,周铁涛.β基Mg-12Li-3Al-5Zn合金的塑性变形行为[J].金属热处理,2005(03):36-39. |
| [13] | Bach F W;Schaper M;Jaschik C .[J].Materials Science Forum,2003,419-422(02):1037-1042. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%