马鞍山钢铁股份有限公司第4炼轧厂有300t复吹转炉2座,投产初期生产不正常。通过改进氧枪喷头参数,开展转炉炼钢的基础研究,优化吹氧、造渣制度和规范吹炼操作等措施,经过2年多的生产实践,使转炉炼钢操作正常化,能够满足生产低碳优质深冲钢的技术要求。
There were two 300 t combined blown converters in Maanshan Iron and Steel Co.,Ltd.,and the performance of top-bottom converters was abnormality at the start of operation.After more than two years of production practice,converter steelmaking operation were normalized and satisfied the production of low carbon deep drawing steel requirements through improving oxygen lance nozzle parameters,basic research in steelmaking,optimizing the oxygen blowing and slagging system and regulating the converter operation.
参考文献
| [1] | 夏皮罗AH;陈立于.可压缩流的动力学与热力学-上册[M].北京:科学出版社,1966 |
| [2] | KlausWunnenbergI;MillonanS;王新华.洁净钢-洁净钢生产工艺技术[M].北京:冶金工业出版社,2006 |
| [3] | Gaye H.Estirmation de I.Equilibre MetaHaitier Basiclue d.Acierie[A].Versailles:IRSID,1978:23. |
| [4] | 杨文远,郑丛杰,杨立红,陈华,崔健,许春雷,蒋晓放.大型转炉炼钢脱磷的研究[J].炼钢,2002(01):30-34. |
| [5] | 蔡开科.转炉冶炼低碳钢终点氧含量控制[J].钢铁,2009(05):27-31. |
| [6] | 杨文远,蒋晓放,王明林,崔健,赵元,刘路长.大型转炉炼钢工艺参数优化的研究[J].钢铁,2010(10):27-32. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%