Pt and Ir coatings were produced by double glow plasma technology on the surface of Ti alloy substrates.The chemical compositions of the coatings were determined by X-ray diffraction and X-ray photoelectron spectroscopy.The microstructure and morphology of the coatings were observed by scanning electron microscopy.The hardness and elastic modulus of the coatings were estimated by nanoindentation.The measurements of adhesive forces of the coatings were performed with scratch tester.The results indicated that the Pt and Ir coatings displayed the preferred (220) orientation due to the initial nuclei with preferred growth on the surface of the substrates.The interface between the Pt coating and substrate exhibited no evidence of delamination.The Ir coating was composed of irregular columnar grains with many nanovoids at the interface between the coating and substrate.The mean values of hardness for Pt and Ir coatings were 0.9 GPa and 9 GPa,respectively.The elastic modulus of Pt and Ir coatings were 178 GPa and 339 GPa,respectively.The adhesive forces of the Pt and Ir coatings were about 66.4 N and 55 N,respectively.The Pt and Ir coatings adhered well to the Ti alloy substrates.
参考文献
| [1] | Couderc C .[J].Platinum Metals Review,2010,54(03):186-191. |
| [2] | Harding J T;Fry V R;Tuffias R H.Oxidation resistance of CVD coatings[M].Air Force Rocket Propulsion Laboratory (AFRPL),Edwards Air Force Base,CA,1987 |
| [3] | Vargas R;Goto T;Zhang W et al.[J].Applied Physics Letters,1994,65(09):1094-1096. |
| [4] | Goto T;Vargas J R;Hirai T .[J].Journal De Physique Ⅱ,1993,3(03):297-304. |
| [5] | Guerrero R M;Torres M Z F;Zuniga I M M et al.[J].Journal of Metastable and Nanocrystalline Materials,2005,24/25:623-626. |
| [6] | J. R. Vargas Garcia;Takashi Goto .Chemical Vapor Deposition of Iridium, Platinum, Rhodium and Palladium[J].Materials transactions,2003(9):1717-1728. |
| [7] | Mumtaz K;Echigoya J;Hirai T et al.[J].Journal of Materials Science Letters,1993,12(18):1411-1412. |
| [8] | Meyer S F;Hsieh E J;Burt R J .[J].Thin Solid Films,1980,72(02):373-378. |
| [9] | Tokura H;Window B;Neely D et al.[J].Thin Solid Films,1994,253(1/2):344-348. |
| [10] | Ying Zhang;Zhaofeng Chen;Liangbing Wang;Bo Yan;Cong Li;Dan Fang .Phase And Microstructure Of Tungsten Coating On C/c Composite Prepared By Double-glow Plasma[J].Fusion engineering and design,2009(1):15-18. |
| [11] | Wang L B;Chen Z F;Zhang Y et al.[J].International Journal of Refractory Metals and Hard Materials,2009,27(03):590-594. |
| [12] | Wang L B;Chen Z F;Zhang P Z et al.[J].J Coat Technol Res,2009,6(04):517-522. |
| [13] | Wu W P;Chen Z F;Lin X et al.[J].Vacuum,2011,86(04):429-437. |
| [14] | Chen Z F;Wu W P;Wang L B et al.[J].Surface Engineering,2011,27(04):242-245. |
| [15] | Wu W P;Lin X;Chen Z F et al.[J].Plasma Chemistry and Plasma Processing,2011,31(03):465-475. |
| [16] | Zhu L A;Bai S X;Zhang H .[J].Surface and Coatings Technology,2011,206(06):1351-1354. |
| [17] | Kuppusami P;Murakami H;Ohmura T .[J].J Vac Sci Teehnol:A,2004,22(04):1208-1217. |
| [18] | M. Dao;L. Lu;R.J. Asaro .Toward a quantitative understanding of mechanical behavior of nanocrystalline metals[J].Acta materialia,2007(12):4041-4065. |
| [19] | Tjong SC;Chen H .Nanocrystalline materials and coatings[J].Materials Science & Engineering, R. Reports: A Review Journal,2004(1/2):1-88. |
| [20] | Davis J R.Metals Handbook:Desk Edition 2nd edn[M].Materials Park,OH:ASM International,1999 |
| [21] | Wu W P;Chen Z F .[J].Journal of Adhesion Science and Technology,2012,26:1705-1715. |
| [22] | Zhaofeng Chen;Wangping Wu;Liangbing Wang .FRACTURE IN POLYCRYSTALLINE IRIDIUM COATING[J].International Journal of Fracture,2008(2):185-190. |
| [23] | Panfilov P;Yermakov A .On brittle fracture in polycrystalline iridium[J].Journal of Materials Science,2004(14):4543-4552. |
| [24] | Cawkwell, MJ;Nguyen-Manh, D;Woodward, C;Pettifor, DG;Vitek, V .Origin of brittle cleavage in iridium[J].Science,2005(5737):1059-1062. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%