欢迎登录材料期刊网

材料期刊网

高级检索

在无籽晶的生长条件下,利用光学浮区定向凝固炉制备了Ti-44.5Al-3Nb-0.8Si-0.2C合金定向试棒.从试棒中切取择优取向的晶粒作为籽晶,引晶自身并成功得到片层界面平行生长方向的定向试棒.结果表明,该试棒的室温屈服强度约为722 MPa,伸长率约为3.9%.SEM观察发现,大量条形硅化物在片层组织中析出.实验结果表明:该合金片层组织具有较好的热稳定性,具备引晶功能,但硅化物的存在使得合金室温塑性略低.

参考文献

[1] Kim Y Y;Dimiduk D M .Progress in the understanding of gamma Titanium Aluminides[J].Journal of the Minerals Metals & Materials Society,1991,43(08):40-47.
[2] Dimiduk DM .Gamma titanium aluminide alloys--an assessment within the competition of aerospace structural materials[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1999(2):281-288.
[3] Inui H;Oh M H;Nakamura A et al.Room-temperature tensile deformation of polysynthetically twinned (PST) crystals of TiAl[J].ACTA METALLURGICA ET MATERIALIA,1992,40(11):3095-3104.
[4] Yokoshima S;Yamaguchi M .Fracture behavior and toughness of PST crystals of TiAI[J].Acta Materialia,1996,44(03):873-883.
[5] M.Yamaguchi;D.R.Johnson .Directional solidification of TiAl-base alloys[J].Intermetallics,2000(5/6):511-517.
[6] S. W. Kim;P. Wang;M. H. Oh .Mechanical properties of Si- and C-doped directionally solidified TiAl-Nb alloys[J].Intermetallics,2004(5):499-509.
[7] J.H. Kim;S.W. Kim;H.N. Lee .Effects of Si and C additions on the thermal stability of directionally solidified TiAl-Nb alloys[J].Intermetallics,2005(10):1038-1047.
[8] D. R. JOHNSON;H. INUI;M. YAMAGUCHI .DIRECTIONAL SOLIDIFICATION AND MICROSTRUCTURAL CONTROL OF THE TiAl/Ti_3Al LAMELLAR MICROSTRUCTURE IN TiAl-Si ALLOYS[J].Acta materialia,1996(6):2523-2535.
[9] Johnson D R;Masuda Y;Inui H et al.Alignment of the TiAl/Ti3Al lamellar microstructure in TiAl alloys by growth from a seed material[J].Acta Materialia,1997,45(06):2523-2533.
[10] Kim S E;Lee Y T;Oh M H et al.Directional solidification of TiAl-Si alloys using a polycrystalline seed[J].INTERMETALLICS,2000,8(04):399-405.
[11] Kim SE.;Lee YT.;Oh MH.;Inui H.;Yamaguchi M. .Directional solidification of TiAl base alloys using a polycrystalline seed[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(0):25-30.
[12] D. R. Johnson;H. Inui;S. Muto .Microstructural development during directional solidification of alpha-seeded TiAl alloys[J].Acta materialia,2006(4):1077-1085.
[13] X.F. Ding;J.P. Lin;L.Q. Zhang .Lamellar orientation control in a Ti-46Al-5Nb alloy by directional solidification[J].Scripta materialia,2011(1):61-64.
[14] X.F. Ding;J.P. Lin;L.Q. Zhang .Microstructural control of TiAl-Nb alloys by directional solidification[J].Acta materialia,2012(2):498-506.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%