点阵结构金属多孔材料制造技术

金属功能材料, 2012, 19(1): 59-63.

1.西北有色金属研究院宝德粉末冶金有限责任公司,陕西西安710016

2.西北有色金属研究院宝德粉末冶金有限责任公司,陕西西安710016

3.西北有色金属研究院宝德粉末冶金有限责任公司,陕西西安710016

4.西北有色金属研究院宝德粉末冶金有限责任公司,陕西西安710016

5.西北有色金属研究院宝德粉末冶金有限责任公司,陕西西安710016

6.西北有色金属研究院宝德粉末冶金有限责任公司,陕西西安710016

7.西北有色金属研究院宝德粉末冶金有限责任公司,陕西西安710016

Manufacturing Technology on Porous Lattice Metallic Materials

本文综述了点阵结构金属多孔材料的主要拓扑形态及其制造技术,并对目前广泛采用的变形成型法、金属丝编织法,以及随后发展起来的快速成型和注射成型等技术进行了对比分析.最后,对点阵结构金属多孔材料研究的努力方向提出了一点建议.

[1]	A. G. Evans;J. W. Hutchinson;N.A. Fleck;M. F. Ashby;H. N. G. Wadley .The topological design of multifunctional cellular metals[J].Progress in materials science,2001(3-4):309-327.
[2]	Haydn N. G. Wadley;Norman A. Fleck;Anthony G. Evans .Fabrication and structural performance of periodic cellular metal sandwich structures[J].Composites science and technology,2003(16):2331-2343.
[3]	S. Gu;T. J. Lu;A. G. Evans .On the design of two-dimensional cellular metals for combined heat dissipation and structural load capacity[J].International Journal of Heat and Mass Transfer,2001(11):2163-2175.
[4]	John Banhart .Manufacture, characterization and application of cellular Metals and metal foams[J].Progress in materials science,2001(6):559-632.
[5]	Ashby M A;Evans A G;Fleck N A;Gibson L J,Hutchinson,J W,Wadley H N G.Metal Foams:a Design Guide[M].Oxford,UK:Butterworth-Heinemann,2000
[6]	Tian J;Kim T;Lu T J et al.The effects of topology upon fluid-flow and heat-transfer within cellular copper structures[J].International Journal of Heat and Mass Transfer,2004,47:310-317.
[7]	Gregory W. Kooistra;Haydn N.G. Wadley .Lattice truss structures from expanded metal sheet[J].Materials & Design,2007(1):507-514.

上一张下一张

计量

作者相关

文章评分