采用Si作为烧结助剂,利用热压烧结技术烧结制备了SiB6-B4C陶瓷复合材料.采用热力学计算、XRD物相分析,结合SEM图片,探讨了Si-B4C陶瓷的烧结过程和机理.结果表明:Si有助于促进B4C陶瓷的致密化烧结,原位生成的SiB6有助于B4C陶瓷机械性能的提高;Si的最佳加入量为10wt%;预烧处理对Si-B4C陶瓷烧结有利,1000 ~ 1400℃预烧8h后制备的B4C陶瓷弯曲强度447.3 MPa,断裂韧性4.42 MPa· m1/2,HRA硬度为94.
参考文献
[1] | 孙军龙,刘长霞,王保卫.力学性能对B4C/TiB2基陶瓷喷嘴抗冲蚀特性的影响[J].人工晶体学报,2009(02):529-534. |
[2] | Shmuel Hayun;Amir Weizmann;Moshe P. Dariel .Microstructural evolution during the infiltration of boron carbide with molten silicon[J].Journal of the European Ceramic Society,2010(4):1007-1014. |
[3] | Zhang, W.;Gao, L.;Lei, Y.;Yang, B.;Li, J.;Xiao, L.;Yin, Y. .TiAl/B_4C composite fabricated by high energy ball milling and hot press sintering processes and its mechanical properties[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(27/28):7436-7441. |
[4] | 陈刚,章嵩,王传彬,沈强,张联盟.碳化硼陶瓷的放电等离子烧结及其力学性能[J].人工晶体学报,2009(01):165-169. |
[5] | Zhang, M.;Zhang, W.;Zhang, Y.;Gao, L..Fabrication, microstructure and mechanical behavior of SiCw-B _4C-Si composite[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2012:410-414. |
[6] | S. Hayun;D. Rittel;N. Frage .Static and dynamic mechanical properties of infiltrated B_4C-Si composites[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):405-409. |
[7] | Farid Akhtar;Faizul Hasan .Reactive sintering and properties of TiB_2 and TiC porous cermets[J].Materials Letters,2008(8/9):1242-1245. |
[8] | Weike Zhang;Lizhen Gao;Jian Li .TiAl/B_4C marine material-Fabrication, mechanical and corrosion properties[J].CERAMICS INTERNATIONAL,2011(3):783-789. |
[9] | 马千成,张国军,阚艳梅,王佩玲,夏义本.六硼化硅(SiB6)添加剂对B4C陶瓷致密化与力学性能的影响[J].无机材料学报,2008(06):1175-1178. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%