K. Mii (Sumitomo Metal Industries
,
Ltd.
,
1-t-3 Otemachi
,
Tokyo 100
,
Japan)M Amano (National Research Institute for Metals
,
1-2-1 Sengen
,
Tsukuba 305
,
Japan)
金属学报(英文版)
The R & D of hydrogen absorbing alloys in Japan started in the early 1970s.Many alloys such as TiMm1.5 based alloys, Fe-Ti-O alloys (e.g. FeTi1.15 O0.024) andthe(mischmetal)Ni5 based alloys (e.g. MmNi4.5 Cr0.46 Mn0.04) were developed by the early 1980s. The application of these alloys to hydrogen storage, heat storage, heat pump, hydrogen purification and motor vehicles has been tried in many iaboratories,and the various techniques for using hydrogen absorbing alloys have been developed.The standarkization of evaluation methods for hydrogen absorbing alloys has been promoted by the Ministry of International Trade and Industry (MITI), and four of them were established as Japanese Industrial Standard (JIS).Alloys for Ni-Metal Hydride batteries have been extensively investigated since 1987in Japun. Mm-Ni-Co-Al-Mn alloys (e.g. MmNi3.55 Co0.75Al0.9Mn0.4) have been devel-oped and commereialized since 1990. The amount of production of small-size Ni-MH batteries in 1995 was about three hundred milliion in number and about one hundred billion yen. The R & D for higher enerpy-density Ni-MH batteries is intensively in progress.MITI and STA (Science and Technology Agency) have promoted the R & D of hydro-gen absorbing alloys in Japan by carrying out the national projects such as Sunshine Program (MITI: 1974-1993) and Utilization of Wind Engeray (STA 1980-1985). The New Sunshine Program (MITI 1993-2020) have started in 1993. This program con-tains the application of hydrogen absorbing alloys to Economical- Enerpy- City System and to We-NET (International Clean Energy System of Technology Utilizing Hydro-gen: World Energy Network.
关键词:
hydrogen absorbing alloy
,
null
,
null
,
null
吴崇试
,
潘奕
原子核物理评论
doi:10.3969/j.issn.1007-4627.2002.01.001
系统分析了A≈170区正常形变带[521]1/2-中的ΔI=1颤动现象. 根据旋称伙伴带的跃迁能量提取Δ2 Eγ (I)=[Eγ(I)+Eγ(I-2)]/2-Eγ(I-1)值, 表现出旋称相关的规则上下颤动. 其颤动幅度在低自旋端约为50 keV, 而后随自旋而增大或减小, 大体呈抛物线形. 利用改进的ab公式, 提取了相关的脱耦合系数. 运用Nilsson波函数, 探讨了原子核集体哈密顿量中高阶微扰项的可能形式.
关键词:
正常形变带
,
旋称伙伴带
,
ΔI = 1颤动
,
脱耦合效应
,
改进的ab拟合
张昌
,
段远源
,
史琳
,
朱明善
,
韩礼钟
工程热物理学报
析了气相声速与理想气体比定压热容的热力学关系，用超声变程干涉仪测定了1,1,1,2,3,3,3-七氟丙烷(HFC-227ea)的72组气相声速值，温度范围273-333 K，压力范围26-315 kPa，测量不确定度小于0.05%。根据这些实验数据，确定了HFC-227ea的理想气体比定压热容和声速第二维里系数，并分别拟合得到了与温度的函数，理想气体比定压热容的不确定度小于0.5%。使用方阱势能模型导出了HFC-227ea的第二维里系数，并与文献值进行了比较。
关键词:
HFC-227ea
,
声速
,
理想气体比定压热容
,
第二维里系数
Chinese Physics Letters
The magnetic properties of 1 T-TaS2 and 1 T-Fe-0.07 Ta-0.93 S-2 have been studied, Experimental results show that the phase transition temperature of 1 T-TaS2 is a function of the magnetic field, At low temperatures, both compounds are in a mixed state of charge density wave -spin density wave due to the coherent superposition of antiferromagnetic coupling.
关键词:
density
季路成
工程热物理学报
为理清1+1/2对转涡轮及1+3/2对转涡轮使用范围和效能,从而帮助设计决策,本文采用Stewart方法,从速度三角形基本分析入手,以速功比为主要变量,考察、对比1+3/2和1+1/2对转涡轮性能特点.研究表明:各转速比下,1+3/2对转涡轮高效率范围都比1+1/2对转涡轮窄,但其高效区发生在更小的总速功比区域;随转速比绝对值增加,两种涡轮高效率区都增加,高效率区位置都偏向大的总速功比区域;相比于1+1/2对转涡轮,1+3/2对转涡轮具有较低出功比,且偏向于低速功比区域;随转速比绝对值增加,两种对转涡轮出功比范围均拓展.这些结果为未来先进航空发动机涡轮选型提供了重要借鉴.
关键词:
航空发动机
,
对转涡轮
,
无导叶对转涡轮
,
效率
,
出功比
Japanese Journal of Applied Physics Part 1-Regular Papers Brief Communications & Review Papers
The structures and dielectric properties of Pb(Fe1/2Nb1/2)(1-x)TixO3 (PFNT, x = 0.07 and 0.48) single crystals were investigated using a combination of temperature-dependent dielectric, X-ray diffraction (XRD), Raman, and X-ray absorption fine structure (XAFS) spectra. Detailed structure analyses reveal that the crystal structure of PFNT (x = 0.48) is single-phase tetragonal perovskite, whereas that of PFNT (x = 0.07) is a mixture of rhombohedral and tetragonal phases. The structural differences are found to have significant connections with the dielectric properties in the temperature range of 90-300 K. Both samples exhibit a frequency-dependent dielectric anomaly, arising primarily from the 3d electrons hopping between Fe2+ and Fe3+. The second dielectric anomaly, which is a weak frequency dispersion and observable only for PFNT (x = 0.07), was probably caused by a dipole glass behavior near the morphotropic phase boundary. (C) 2012 The Japan Society of Applied Physics
关键词:
iron;fe;ceramics;region;xanes
许树强
,
金头男
材料导报
采用固相合成法制备了具有良好层状结构的LiCo1/3Ni1/3Mn1/3O2.通过化学方法对其进行去锂处理,制备了LixCo1/3Ni1/3Mn1/3O2(0.5≤≤1)系列样品,并利用XRD、TEM以及HR-TEM等方法对其微观结构进行了系统表征.计算与实验结果表明.当0.778≤x＜1时LixCo1/3Ni1/3Mn1/3O2的结构依旧保持O3结构,而当0.5≤x＜0.778时其结构由初始的六方结构转变为单斜结构,同时电子衍射花样模拟及高分辨像模拟证明其对称性由R3m转变为P2/m.锂离子与去锂后形成的空位的有序排列是其对称性发生转变的主要原因.DSC/TG实验表明,LixCo1/3Ni1/3Mn1/3O2的热稳定性随去锂程度的不断加深而减弱;当加热至300～400℃时发生了由单斜结构向尖晶石结构转变的放热反应.
关键词:
LixCo1/3Ni1/3Mn1/3O2
,
单斜转变
,
热稳定性
张惠
,
王会社
,
唐菲
,
徐建中
,
赵晓路
工程热物理学报
为了研究和改善1+1/2对转涡轮性能,本文对1+1/2对转涡轮两种转速下不同落压比共16种工况进行了数值研究,并与实验结果进行了对照.结果表明近设计工况下计算结果和实验值吻合较好.1+1/2对转涡轮出口背压对高压转子性能影响较小,对低压转子性能影响较大,这导致变工况下1+1/2对转涡轮高低压轴出功比变化较大.通过对某典型非设计工况和设计工况下的流场结构的分析发现非设计工况下1+1/2对转涡轮高压动叶中发生了明显的流动分离.高低压动叶不能很好地匹配,需要采取合理的流动控制措施去改善已有1+1/2对转涡轮的变工况性能.
关键词:
1+1/2对转涡轮
,
出功比
,
变工况
,
数值模拟
,
实验研究
