J.S. Ye
,
Z.R. Ye
,
A. Yang
金属学报(英文版)
A modified temperature-phase transformation-stress coupled 3D non-linear mathemat-ical model and a series of subroutines on the non-liner MARC (MARC Analysis Re-search Corporation) are developed. Then this modified model has been utilized to simu-late the heat treatment processes of 280 connecting rod of 16V280ZJ diesel locomotive.The simulation results are basically in agreement with the experiments, which testifythat the mathematical model and method are feasible. In addition, the simulationcan not only obtain the transient temperature and microstructure of heat treatmentprocess, but also provide a sound scientific basis for the heat treatment workers.
关键词:
non-linear
,
null
,
null
,
null
Acta Chimica Sinica
Passive film formed on 304 stainless steel in 2.5 mol/L H2SO4 solution by using alternating voltage (A. V.) passivation have been investigated by measuring capacitance and photoelectrochemical parameters. The investigation of the effect of measure frequency on the slope of Mott-Schottky curve has been carried out. The photoelectrochemical measurements were consistent with the capacitance measurement. Analysis of the experimental results showed that the passive film formed 304 stainless steel by using A. V. passivation exhibits semiconducting properties. Using the simple model of semiconductor rather than the multi-donor level model can explain satisfactorily the semiconducting behavior of the film formed on 304 stainless steel by using A.V. passivation.
关键词:
A. V. passivation;passive film;semiconducting properties;stainless;steel;model;electrodes
Fatigue & Fracture of Engineering Materials & Structures
Fatigue data for welded joints subjected to an explosion treatment (ET) were obtained using rotary bending fatigue specimens. The fatigue fracture surfaces were observed by SEM and the dislocation morphologies by TEM. Mechanical properties have been quantitively studied by considering elastic and plastic shock wave characteristics. The test results indicate that the fatigue strength of welded joints subjected to ET is apparently improved due to the action of elastic or plastic stress waves while the ductility of the welded joints, i.e., reduction in area, is greatly increased.
关键词:
Canying CAI
,
Qibin YANG
,
Hongrong LIU
材料科学技术（英文）
Assuming that the wave function , the Schrodinger equation can be written as . Neglecting the last two terms, an analytical expression of electron dynamical diffraction was derived by Qibin YANG et al. In this paper, the analytical expression is modified by further considering the second-order differential term . When the accelerating voltage is not very high, or the sample is not very thin, the reciprocal vector ɡ is large, the modification of the second-order differential is necessary; otherwise it can be neglected.
关键词:
Electron dynamical diffraction
,
null
中国腐蚀与防护学报
N。1Atmospheric Corrosivlty for Steels………………………………………………… .LIANG Caideng HO[I i。-tat（6）Caustic Stress Corrosion Cr。king of Alloy 800 Part 2.The Effect of Thiosul执e……………………………………… KONG De-sheng YANG Wu ZHAO Guo-zheng HUANG De.ltL。ZHANG Yu。。he CHEN She。g-bac（13）SERS slid E16CttOCh6iniC81 Stlldy Of Illhibit1Oli M6ch＆tllsth Of ThlollY68 Oil ITOll ID H....
关键词:
李慧玲
,
阮可青
,
王强
,
陈宇
,
钱朔
,
余勇
,
黄利
,
郑重
,
汪成友
,
曹烈兆
低温物理学报
doi:10.3969/j.issn.1000-3258.2003.04.007
研究了不同Pb含量的Bi2-xPbxSr2Co2Oy单晶的输运行为.用A. F. Ho 和A. J. Schofield提出的公式对ρc的温度依赖关系曲线进行了拟合,得到了较好的结果.我们利用小极化子理论解释了ρc的复杂行为.
关键词:
过渡金属氧化物的电导
,
小极化子
徐东
,
巫欣欣
,
程晓农
,
张剑平
,
施利毅
材料导报
采用两步烧结制备了Y_2O_3掺杂ZnO压敏瓷,其电位梯度为863～1330V/mm,非线性系数为27.0～49.7,漏电流为0.55～1.13μA.研究结果表明,当Y_2C_3的掺杂量为1.00%(摩尔分数)时,压敏瓷电性能最好,电位梯度为1330V/mm,非线性系数为49.7,漏电流为0.76μA.
关键词:
压敏瓷
,
两步烧结
,
稀土
,
显微组织
,
电性能
颜慧成
,
郭征
,
张孟亭
,
张洪平
钢铁研究学报
引入变量m(冲量密度)和Yang-Mills型规范变换m=u+gradφ,将原始变量的N-S方程转化为规范-不变量形式,用自由质点法处理Voronoi元,对连铸结晶器弯月面处保护渣流动行为进行数学模拟.输出振动周期内的动态流场,然后结合一组试验数据进行计算,计算结果与实际情况相吻合,进而讨论了渣圈对液渣流动行为的影响,为研究结晶器弯月面处保护渣的行为和铸坯振痕的形成提供了一定的依据.
关键词:
连续铸钢
,
保护渣
,
流动行为
,
数学模拟
章明川
,
张楚
,
林郁郁
,
徐旭常
工程热物理学报
根据快速流化床的基本流动特性、A 型噎塞和 C 型噎塞的特征与定义,建立了一个统一,自恰的快速床模型一分相共存模型.模型以 A 型噎塞的修正Yang公式为‘本构方程',合理预报了快速床的最小固体流率Gsm,以及在固体流率不变的条件下降低操作气速时床层由A型噎塞向C型噎塞的连续过渡.模型中的稀相有效气流速度函数幂次n为可调参数,根据 C 型噎塞速度预报的Yousfi and Gau公式,初步确定模型参数n=4.
关键词:
快速流态化
,
噎塞速度
,
A 型噎塞
,
C 型噎塞
,
分相共存模型
