Author X.A. Zhang1)
,
H.Q. Xia1)
,
Z.T. Wu1)
,
Y.F. Han1)
,
R. Shi2) and G.X. Hu2) \= 1) Mechanical Properties Laboratory
,
Beijing Institute of Aeronautical Materials
,
Beijing 100095
,
China2) The State Education Commission Open Research Laboratory for High Temperature
金属学报(英文版)
Materials and Testing, Shanghai Jiao Tong University, Shanghai 200030, ChinaManuscript received 18 October 1998 The threestage creep behavior of DD3 single crystal superalloy had been studied. The results show that the creeprupture properties of DD3 single crystal satisfy the requirements for high performance turbine blade application. The influence of crystal orientation on the creeprupture property of DD3 single crystal was tested and discussed. An engineering criterion to evaluate the regimes of secondary and tertiary creep is proposed, and this method gives a reasonable result for practical applications. The fractography and TEM micrography of the tested specimens had been studied, and it is determined that the glidecontrolled creep is the basic creep mechanism of DD3 single crystal at intermediate temperature, but the thermally activated processes become dominant at higher temperature.
关键词:
threestage creep curve
,
null
,
null
,
null
Author H.J. Shi1)
,
S.L. Liu2)
,
Y.H. He1) and Z.X. Duan2) 1) Department of Engineering Mechanics
,
Tsinghua University
,
Beijing 100084
,
China2) Laboratory of Material Mechanical Properties
,
Beijing Institute of Aeronautical Materials
,
Beijing 100095
,
ChinaManuscript received 18 October 1998
金属学报(英文版)
A series of low cycle fatigue and creepfatigue tests on smooth specimens and notched specimens were performed with a high temperature alloy used in the manufacture of aeroengine turbine discs. The cyclic stressstrain behavior and fracture characteristics of the notched specimens were emphatically investigated. A comparison of fatigue behavior between smooth and notched specimens was done and lifetime of notched specimens was evaluated. At the same temperature, the fatiguecreep lives of the smooth specimens are far greater than that of the notched specimens.
关键词:
low cycle fatigue
,
null
,
null
,
null
Author M.F. Geng1)
,
T. Wang1) and X.A. Zhang2) 1) Department of Special Metal Materials and Products
,
Luoyang Ship Material Research Institute
,
Luoyang 471039
,
China2) Mechanical Properties Laboratory
,
Beijing Institute of Aeronautical Materials
,
Beijing 100095
,
China Manuscript received18 October 1998
金属学报(英文版)
The effects of cyclic loading on crack growth, fracture feature and rupture life of superalloy GH2132 have been studied in the present paper. The crack growth tests were carried out at 550 on compact tension specimens under a wide range of load levels and various periods of hold time, and the fracture surfaces were examined on a scanning electron microscope. The results show that, for both static and cyclic creep, Stage-I of crack growth is related with initial test stress, during which the crack extension is about 0.5mm, and that the final effect of cyclic loading on rupture life depends on the counteraction of its two reversed effects on crack growth rate before and after the point n=0.2.
关键词:
cyclic creep
,
null
,
null
,
null
,
null
,
null
QIAO Lijie LIU Rui XIAO Jimei University of Science and Technology Beijing
,
Beijing
,
China
金属学报(英文版)
The effects of stress components on nucleation sites and propagation directions of stress cor- rosion cracks in brass were investigated with specimens under mode Ⅱ and mode Ⅲ loadings. The results indicated that under mode Ⅱ loading,stress corrosion cracks nucleated on the site with maximum normal stress component and propagated along the plane perpendieular to the maximum normal stress,under mode Ⅲ loading,the stress corrosion crack was not evident on the 45°plane due to the general corrosion in aqueous solution with high NH_4OH concentra- tion,while stress corroded in aqueous solution with low NH_4OH concentration, numerous cracks with spacings of 10—150μm were found on the 45°plane with maximum normal stress and no stress corrosion cracks was observed on the plane with maximum shear stress.
关键词:
stress corrosion cracking
,
null
,
null
,
null
Materials Science & Engineering C-Biomimetic Materials Sensors and Systems
The terminology of materials study inspired by biological systems or phenomena is analyzed at first. It is pointed that the term "bio-inspired" may be better than the terms "bionic" or "biomimetic", since the former is relatively easy to be accepted. The new trends of bio-inspired study of structural materials are analyzed in short. Some progress in bio-inspired design and processing of materials in this institute (IMRCAS) are summarized briefly in this talk, such as biomimetic design of worst bonding interface for composites; dumbell-like whiskers simulating animal bone; fractal tree reinforcement by mimicry of branched roots in soil; etc. The possibility of modification and recovery of materials by nonequilibrium bio-inspired treatment are further explored, including the nonequilibrium process under transient heating, dissipative structure and self-organization process of open system, inspiration by living process, influence of high intensive electropulsing on the working Life of materials, a possible way of fatigue recovery of materials and the healing effect of electropulsing in metals. Some tentative practice in biomaterial modification are also studied such as the reformed bamboo reinforced aluminium laminates, etc. A discussion on the methodology of bio-inspired study of materials consists briefly in the last part of the talk. (C) 2000 Elsevier Science S.A. All rights reserved.
关键词:
bio-inspired;bionic;biomimetic;structural materials;composites
Journal of Applied Physics
The dependence of yield strength, uniform elongation, and toughness on grain size in metallic structural materials was discussed. The toughness is defined as the product of yield strength and uniform elongation. The yield strength versus grain size can be well described by the Hall-Petch relation; however, the uniform elongation versus grain size is not well understood yet. A simple model involving the densities of geometrically necessary dislocations and statistically stored dislocations was proposed to estimate the uniform elongation versus grain size. Existing data for low carbon steels and aluminum indicate that, in the grain size less than 1 mu m, the materials usually exhibit high strength and low uniform elongation and, in the grain size greater than 10 mu m, the materials usually exhibit low strength and high elongation; in either case the toughness is low. However, in the grain size of several micrometers, the toughness is the highest. It is suggested that we should pay more attention to develop the metallic materials with grain size of several micrometers for structural applications. (c) 2007 American Institute of Physics.
关键词:
nanocrystalline copper;nanostructured metal;steels;deformation;ductility;law
