Qinyuan ZHANG
,
Guangming WU
,
Bin ZHOU
,
Jun SHEN
,
Jue WANG
,
Zhonggang WU
,
Xiaohong JI
材料科学技术（英文）
Transparent mixed phase (1 - x)V2O5 -xTiO(2) (x=0,0.1,0.2,0.3,0.4) thin films were prepared on indium tin oxide (ITO) coated glass via sol-gel process. The films were characterized by cyclic voltammetry, optical spectroscopy, scanning electron microscopy, IR and X-ray diffractometer. Electrochemical lithium insertion/extraction showed that the porous structure of sol-gel (1 - x)V2O5-xTiO(2) thin films exhibited good recharge ability of Li+/e(-) insertion/extraction process. For a 220 nm thick (1 - x)V2O5-xTiO(2) film with 90% V2O5, the capacity of charge exchange reached 9 mC/cm(2). In both Li+ intercalated and free states, the films were highly transparent to visible light. Such films have potential applications in counter electrodes for electrochromic smart windows and other electrochemical devices.
关键词:
Guangming WU
,
Jun SHEN
,
Tianhe YANG
,
Bin ZHOU
,
Jue WANG
材料科学技术（英文）
Structural strengthening of the nano porous silica films has been reported. The films were prepared with a base/acid two-step catalyzed TEOS-based sol-gel processing and dip-coating, and then baked in the mixed gas of ammonia and water vapor. The silica films were characterized with TEM, AFM, FTIR, spectrophotometer, ellipsometer, and abrasion test, respectively. The experimental results have shown that the films have a nanostructure with a low refractive index and can form an excellent scratch-resistant broadband anti-reflectance. The two-step catalysis noticeably strengthens the films, and the mixed gas treatment further improves mechanical strength of the silica network. Finally the strengthening mechanism has been discussed.
关键词:
Sol-gel process
,
null
,
null
,
null
Physical Review B
In order to understand the unusually large value of zero-field splitting D for the axial Fe3+ center in a KTaO3 crystal, Zhou made two assumptions in his recent report [Phys. Rev. B 42, 917 (1990)]. In this Comment we will show that his assumption II is qualitatively reasonable, whereas assumption I is unnecessary and doubtful.
关键词:
electric-field;srcl2
Journal of Physics and Chemistry of Solids
The layered ternary ceramics Ti3SiC2 and Ti3AlC2 are isostructural and can form Ti3Si1-xAlxC2 solid solutions combining the advanced properties of both compounds [H.B. Zhang, Y.C. Zhou, Y.W. Bao, M.S. Li, Improving the oxidation resistance of Ti3SiC2 by forming a Ti3Si0.90Al0.1C2 solid solution, Acta Mater. 52 (2004) 3631-3637; E.D. Wu, J.Y. Wang, H.B. Zhang, Y.C. Zhou, K. Sun, Y.J. Xue, Neutron diffraction studies of Ti3Si0.9Al0.1C2 compound, Mater. Lett. 59 (2005) 2715-2719; J.Y. Wang, Y.C. Zhou, First-principles study of equilibrium properties and electronic structure of Ti3Si0.75Al0.25C2 solid solution, J. Phys.: Condens. Matter 15 (2003) 5959-5968; Y.C. Zhou, J.X. Chen, J.Y. Wang, Strengthening of Ti3AlC2 by incorporation of Si to form Ti3Al1-xSixC2 solid solutions, Acta. Mater. 54 (2006) 1317-1322]. In the present work, the solid solutions of Ti3Si1-xAlxC2 (x = 0, 0.25, 0.33, 0.5, 0.67, 0.75, 1) are investigated by first-principle calculations based on pseudo-potential plan-wave method within the density functional theory framework. The results show that as Al content increases in the solid solution, all the bonds have weakened to certain extents, which lead to an unstable structure both energetically and geometrically. The calculated results are compared and discussed with the reported data for the Ti3Si1-xAlxC2 solid solutions. (c) 2007 Elsevier Ltd. All rights reserved.
关键词:
ceramics;ab initio calculations;electronic structure;electrical;conductivity;oxidation behavior;mechanical-properties;ti3sic2;temperature;ti3alc2;air;si
ZHOU Jiankun LIU Xianghuai CHEN Youshan WANG Xi ZHENG Zhihong HUANG Wei ZOU Shichang Shanghai Institute of Metallurgy
,
Academia Sinica
,
Shanghai
,
China
金属学报(英文版)
The TiN films were synthesized with an alternate process of depositing titanium from a E-gun evaporation source and 40 keV N~+ bombarding onto the target.It is shown from the composi- tion analysis and structure investigations using RBS,AES,TEM,XPS and X-ray diffraction spectrum that the formed fihns are mainly composed of TiN phase with grain size of 30—40 nm and without preferred orientation,the nitrogen content in the film is much less than that in case without N~+ bombarding,and an intermixed region about 40 nm thick exists between the film and the substrate.The films exhibt high microhardness and low friction. ZHOU Jiankun,Ion Beam Laboratory,Shanghai Institute of Metallurgy,Academia Sinica, Shanghai 200050,China
关键词:
TiN film
,
null
赵洁
,
姚秉华
,
冯逸晨
功能材料
采用共沉淀法制备BiNbO4纳米棒。利用X射线粉末衍射仪（XRD）、透射电镜（TEM）、紫外-可见漫反射光谱（UV-Vis DRS）和热重分析（TG/DTA）对其结构、形貌和性质进行表征,并通过紫外-可见分光光度计分析BiNbO4纳米棒光降解罗丹明B来研究其光催化活性。结果表明以五氧化二铌和五水硝酸铋为原料制备得到正交相结构的BiNbO4纳米棒;BiN-bO4纳米棒具有较高的光催化活性,在紫外光下,pH值=3.05,催化剂用量为2g/L时能够有效地降解罗丹明B,降解率受到光源、催化剂浓度和溶液pH值的影响较大。
关键词:
共沉淀法
,
BiNbO4纳米棒
,
光催化
杨飒
,
郑志硕
量子电子学报
doi:10.3969/j.issn.1007-5461.2015.03.005
针对尺度不变特征变换(Scale-invariant feature transform,SIFT)算法在关键点特征描述向量阶段计算复杂并且维数较高的现象,提出了一种基于压缩感知理论的SIFT算法.通过压缩感知理论的稀疏特征表示方法,对SIFT关键点特征向量进行提取,将高维梯度导数向量降到低维稀疏特征向量,降低了关键点描述向量维度.采用欧式距离作为关键点的相似性度量, Best-Bin-First(BBF)数据结构避免穷举,使数据的运算量大为减少.实验结果表明,新算法对存在仿射变换的医学图像配准性能优于传统SIFT算法,与当前改进型的SIFT算法相比,本文算法的实时性明显增强.
关键词:
图像处理
,
图像配准
,
尺度不变特征变换
,
特征提取
,
稀疏随机投影
李伟国
,
祁超
,
刘立岩
,
赵大庆
应用化学
doi:10.3969/j.issn.1000-0518.2005.11.003
分别研究了二乙三胺五乙酸(DTPA)及2种衍生物二乙三胺五乙酸-双二甲酰胺(DTPA-BDMA)和二乙三胺五乙酸-双(异烟肼)(DTPA-BIN)对乳酸脱氢酶活性及酶促反应动力学的影响.结果表明,它们均可以抑制脱氢酶的活性,其抑制类型为竞争性的抑制作用,抑制常数分别为3.37、7.41、8.52μmol/L.紫外差谱结果表明,DTPA及其衍生物可以和酶分子作用,其羧基部分被包埋到分子内部,在酶分子的结合部位存在芳香族的氨基酸残基.DTPA与脱氢酶作用后使酶分子中的色氨酸荧光强度减弱,对酪氨酸的荧光没有明显影响.
关键词:
二乙三胺五乙酸
,
乳酸脱氢酶
,
酶学动力学
,
紫外差谱
,
荧光光谱
Physical Review B
The assignment of the absorption spectrum of Y3Fe5O12 (YIG) made by Scott et al. [Phys. Rev. B 10, 971 (1974)] is shown to be incorrect and a new one is made by diagonalizing the complete cubic crystal-field matrices for d5 ions, involving spin-orbit interaction, given by Zhou et al. [Phys. Rev. B 44, 7499 (1991)]. The Racah parameters B and C, the crystal-field parameter Dq, and the spin-orbit coupling coefficient zeta are determined (in units of cm-1) as B = 783.3(530), C = 2928(3220), Dq = 1336(1300), zeta = 395 for octahedral Fe3+, and B = 606.1(705), C = 2696(2730), Dq = -1117.3(560), zeta = 335 for tetrahedral Fe3+, where the numerals in parentheses are the values adopted by Scott et al. Furthermore, the cubic zero-field splitting parameter a of Fe3+ in YIG is calculated to be a(oct) = 156 X 10(-4) cm-1 and a(tet) = 58.6 X 10(-4) cm-1. The value for a(oct) differs from the value of 189 X 10(-4) cm-1 found for Fe3+ in Y3Ga5O12:Fe3+. These results support speculations made by Geschwind [Phys. Rev. 121, 363 (1961)].
关键词:
fe3+;mn2+
刘守平
,
周上祺
,
王佳眉
,
任勤
腐蚀学报（英文）
用金相显微镜、扫描电镜、X射线衍射仪和X射线能谱仪对天然气井油管悬挂器腐蚀失效进行了检测分析，并对天然气井油管悬挂器用35CrMo钢进行了盐雾试验，结果表明，天然气中的水和CO2是引起腐蚀的主要介质，腐蚀产物主要是FeCO3，高速天然气冲刷和钢中的非金属夹杂加剧了腐蚀的速度.
CORROSION FAILURE ANALYSIS OF AN OIL TUBE USED IN NATURAL GAS WELL
LIU Shou-ping,ZHOU Shang-qi,WANG Jia-mei,REN Qin
Chongqing University
A failed oil tube used in natural gas well was examined by optical microscope,scanning electron microscope ,X-ray diffractometer and X-ray spectrometer.Corrosion behavior of 35CrMo steel samples of the oil tube were investigated by means of salt spray tests in the laboratory.The results show that CO2 and H2O are primary factors in the corrosion of oil tube.The corrosion product is FeCO3,non-metallic inclusions in the steel and erosion of natural gas fluid played an important role in accelerating the corrosion.
oil tube;
natural gas well；
35CrMo steel；
failure analysis；
corrosion
关键词:
悬挂器
,
null
,
null
,
null
