材料期刊网

EVALUATION OF EMBRITTLEMENT BEHAVIOR DUE TO SENSITIZATION IN A CRYOGENIC AUSTENITIC STAINLESS STEEL BY MEANS OF SMALL PUNCH AND FRACTURE TOUGHNESS TESTS

S.C Liu(Research Institute for Fracture Technology Faculty of Engineering , Tohoku University , Sendai , Japan , on leave from Dalian Railway Institute , Dalian 116028 , China)II-Hyun Kown , T Hashida and H Takahashi(Research Institute for nacture Technology , Faculty of Engineering , Tohoku Univeristy , Sendai , Japan)

金属学报(英文版)

In order to evaluate the tendency of mechanical properties degrudation due to weld-ing and other processing in materials used for supporting coils in super conducting rnaguets utilized in thermonuclear jusion reactore, a small punch (SP) test was used.This test, which was originally developed to study irradiation damage using miniatursized specimens was performed at 77 and 4 K for solution treated and sensitized JN1 austenitic stainless steel, a candidate cryogenic structural material. The area under the load-deflection curve up to the maximum applied load in SP test was defined as the SP enerpy, to characterize the resistance to fracture. Although solution treated material exhibited ductile fracture mode with high SP enerpy, embrittlement behavior due to sensitization at 650-800°for 1-5 h was shown clearlg by SP test with brittle intergranular fracture and decreased SP enerpy. Comparison of the results obtained by SP test with those by fracture toughness test showed the usefulness of SP test for evaluation of sensitization induced embrittlement at cryogenic temperature. The re-sults obtained in this study can be very usefol in predicting the degradation due to welding and other processing in cryogenic materials.

关键词: small punch test , null , null , null

Introduction to atmospheric corrosion research in China

Science and Technology of Advanced Materials

In this paper, we introduce the research on atmospheric corrosion in China. We describe the climate characteristics and the classification of atmospheric corrosivity across the whole country. We also describe the rusting evolution under simulated wet/dry cyclic conditions. (C) 2007 NIMS and Elsevier Ltd. All rights reserved.

关键词: atmospheric corrosion;corrosivity;rusting evolution;weathering steels;rust;mechanism;so2;o-3;no2

Recent Advances of Laser Coating Technology in China

LIANG Yong LI Ruiguo Institute of Metal Research , Academia Sinica , Shenyang 110015 , ChinaInstitute of Corrosion and Protection of Metals , Aademia Sinica , Shenyang , 110015 , China

材料科学技术（英文）

Recent advances in laser coating technology including laser cladding,laser surface alloying and laser vapour deposition in China are reviewed in this paper.

关键词: laser , null , null , null , null

Development of Cast Superalloys for Gas Turbines in China

CHEN Rongzhang CHEN Wanhua Institute of Aeronautic Materials , Beijing 100095 , China.

材料科学技术（英文）

As in other countries,significant achievements in the research of cast superalloys for many years have also been obtained in China.These results are important contribu- tion to the development of aero and land-based gas tur- bine engines.

关键词: cast superalloy , null

R&D STATUS ON INTERMETALLICS IN CHINA

CHEN Guoliang(State Key Laboratory for Advanced Metals and Materials University of Science and Technology Beijing Beijing 100083 , China)SHI Changxu (Academia Sinica , Beijing 100864 , China)

金属学报(英文版)

This paper briefiy introduces the R&D of intermetallics in China. R&D on intermetallics in a national scale in China began near ten years ago. The investigation in past years focused on the fundamental research and materials development. A significant progress has been made. Various components that made of Ti3Al Ni3Al, TiAl and Fe3Al have been successfully manufactured Some of them have been evaluted. It is expected that some intermetallic alloys will be produced in an industrial scale in the near future.

关键词: :intermetallic alloys , null , null , null

Further development of NdFeB magnet industry in China

Yang LUO

材料科学技术（英文）

Due to continued growth in key markets, a broadening of application base and performance improvements, the market demands of NdFeB magnet increased steadily in 1998, and the global output of sintered NdFeB magnet exceeded 10,000 t, in spite of the economic recession in Asia. In 1998 China produced 3,850 t sintered NdFeB block magnet, with an annual growth rate of +22% over the output in 1997.

关键词:

Development of rapidly quenched soft magnetic materials in China

Shaoxiong ZHOU

材料科学技术（英文）

The discovery of the first Fe-based ferromagnetic amorphous alloy in 1966 had made an impact on conventional magnetic materials because of its unique properties. Since then, a number of amorphous magnetic materials have been successfully developed and used in a wide variety of applications. A brief review of R & D activities on amorphous soft magnetic materials in China is given from the beginning to the present in a somewhat chronological order, followed by a brief introduction to their applications on electric and electronic industries. An analysis and a prospect of Chinese market of such amorphous materials are also presented.

关键词:

Recent developments in high temperature intermetallics research in China

Intermetallics

A comprehensive survey was made of various advances of intermetallics research in China. The investigation focussed on the fundamental research and materials development. Charge density distribution and site occupancy of alloying elements, environmental embrittlement and chemical reaction, interface structures and phase transformation at the atomic scale, nanocrystalline intermetallics and its thermal stability, superplastic behavior and anomalous yield strength peak are reviewed. Several Ti-Al and Ni-Al based alloys have been manufactured, and show good mechanical properties. Diverse components have been fabricated successfully. (C) 2000 Elsevier Science Ltd. All rights reserved.

关键词: aluminides, miscellaneous;hydrogen embrittlement;mechanical properties;at high temperatures;superplastic behavior;phase interfaces;grain-boundary fracture;in-situ composites;environmental;embrittlement;hydrogen embrittlement;ni3al;compression;alloys;co3ti;boron;feal

Pyromellitic dianhydride-modified beta-cyclodextrin microspheres for Pb(II) and Cd(II) adsorption

Journal of Applied Polymer Science

In this work, the pyromellitic dianhydride (PMDA)-grafted P-cyclodextrin (P-CD) microspheres have been prepared for the removal of lead and cadmium metal ions in aqueous solution by a batch-equilibration technique. The effects of the pH of the solution, contact time, and initial metal concentration were studied. The adsorption capacities for the two metal ions increase significantly as a large number of carboxyl groups are present on the microspheres surface. The equilibrium process is better described by the Langmuir isotherm than the Freundlich isotherm. The maximum adsorption capacities are 135.69 and 92.85 mg g(-1) for Pb(II) and Cd(II), respectively. Kinetic studies show good correlation coefficients for a pseudosecond-order kinetic model, confirming that the sorption rate is controlled by chemical adsorption. The regeneration of the adsorbent can be carried out by treating the loaded microspheres with 0.2 (mol L-1) HCl obtaining high desorption rate for the two metal ions. (C) 2007 Wiley Periodicals, Inc.

关键词: beta-cyclodextrin;pyromellitic dianhydride;modification;microspheres;adsorption;metal-ions;aqueous-solutions;heavy-metals;biosorption;removal;beads;methacrylate);extraction;adsorbent;kinetics

Key R&D activities for development of new types of wrought magnesium alloys in China

Transactions of Nonferrous Metals Society of China

Many researchers in China are actively engaged in the development of new types of wrought magnesium alloys with low cost or with high-performances and novel plastic processing technologies. The research activities are funded primarily through four government-supported programs: the Key Technologies R&D Program of China, the National Basic Research Program of China, the National High-tech R&D Program of China, and the National Natural Science Foundation of China. The key R&D activities for the development of new wrought magnesium alloys in China are reviewed, and typical properties of some new alloys are summarized. More attentions are paid to high-strength wrought magnesium alloys and high-plasticity wrought magnesium alloys. Some novel plastic processing technologies, emerging in recent years, which aim to control deformation texture and to improve plasticity and formability especially at room temperature, are also introduced.

关键词: wrought magnesium alloy;microstructure;properties;alloy designing;plastic deformation;research projects;y-zr alloys;mechanical-properties;mg-4y-4sm-0.5zr alloy;grain-refinement;rare-earth;microstructure;gd;phase;temperature;evolution