SUN Wenqiang
,
CAI Jiuju
,
MAO Hujun
,
GUAN Duojiao
钢铁研究学报(英文版)
As the largest energy consuming manufacturing sector and one of the most important sources of carbon dioxide (CO2) emissions, the China′s iron and steel industry has paid attention to the study of changing trend and influencing factors of CO2 emissions from energy use. The logarithmic mean Divisia index (LMDI) technique is used to decompose total change in CO2 emissions into four factors: emission factor effect, energy structure effect, energy consumption effect, and steel production effect. The results show that the steel production effect is the major factor which is responsible for the rise in CO2 emissions; whereas the energy consumption effect contributes most to the reduction in CO2 emissions. And the emission factor effect makes a weak negative contribution to the increase of CO2 emissions. To find out the detailed relationship between change in energy consumption or steel production and change in CO2 emissions, the correlation equations are also proposed.
关键词:
CO2 emissions
,
energy use
,
LMDI technique
,
steel production
,
energy consumption
LI Yuqing WANG Cirong GU Zhaofeng Research Institute of Daye Steel Works
,
Huangshi
,
China Senior Engineer
,
Research Institute of Daye Steel Works
,
Huangshi 435001
,
China
金属学报(英文版)
Determination of(Fe,Cr)_7C_3 in Cr27 cast iron results about 30 v.-%.Minor Si and Mn are present.Sectional area of the M_7C_3 grains is 1—50μm~2.Combining matrix analysis of elec- tron diffraction pattern with calculated angle between plane traces,{011}twins and also {013}twins producing local environment for Ru_7B_3 are observed in the orthorhombic M_7C_3. A crystallographic model for M_7C_3 is proposed.
关键词:
cast iron
,
null
,
null
,
null
,
null
ZHANG Shourong
钢铁研究学报(英文版)
One of the problems encountered in 60′s to 80′s of 20th century in China′s steel industry was short life of blast furnace shaft as well as the excessive erosion of blast furnace hearth. A series of research work was carried out in order to extend blast furnace campaign life. The concept of research and development was integrated in the construction of BF (blast furnace) No5 at WISCO (Wuhan Iron and Steel Corporation), and in October, 1991, the BF No5 was blown in. The blast furnace has worked smoothly for more than 15 years without any medium repair even guniting. It is expected that the campaign life of BF No5 would be longer than 16 years with a production over 11 000 t per unit inner volume (m3). A new blast furnace with an inner volume of 3 400 m3 is under construction, and is designed with a campaign life of 20 years without any medium repair. The campaign life of blast furnaces in China has been extended in recent years.
关键词:
blast furnace;campaign life;erosion
Journal of Electroanalytical Chemistry
5,10,15,20-tetraphenylporphyrin (TPP) and 5,10,15,20-tetra-(4-chlorophenyl)porphyrin (TC1PP) were synthesized and formed adlayers on iron surface. The surface properties of the porphyrin adlayers on iron electrode were characterized by Fourier transform infrared reflection spectroscopy (FT-IR), fluorescence spectrum (FS), scanning electron microscopy (SEM) and electrochemical methods including electrochemical impedance spectroscopy (EIS) and polarization curves. FT-IR and FS results indicated that TPP and TCIPP were able to form adlayers on the iron surface. The electrochemistry results showed that both adlayers of TPP and TCIPP were able to protect iron from corrosion effectively and the protection efficiency of TPP was higher than that of TC1PP. The surface state of iron was characterized by SEM after the iron electrode was corroded in H2SO4 solutions (0.5 M). Besides, quantum chemical calculation was applied to optimize the structure of the two molecules and was able to explain the experimental results to some extent. Results indicated that TPP and TCIPP were good inhibitors for iron corrosion in H2SO4 solutions. (c) 2006 Elsevier B.V. All rights reserved.
关键词:
iron;adlayers;tetraphenylporphyrin;EIS;corrosion inhibitor;self-assembled monolayers;2-dimensional polymer;alkanethiol;monolayers;passive film;gold;protection;surface;acid;copper;spectroscopy
邢峰
,
江潮
,
何文望
金属学报
本文研究了Nd_2(Fe_(1-x)M_x)_(14)B的磁性。少量类金属原子C和Si取代部分Fe,能形成四方结构,且具有单轴各向异性。碳取代Fe,使化合物的Curie温度降低,低温下粘结体样品的内禀矫顽力减少;而Si对Fe的取代可使Curie温度升高,并在x=0.15附近达到极大值。含Si样品在0≤x≤0.10范围内,矫顽力显著增加,室温下从x=0的62.7kA/m增加到x=0.06的138.7 kA/m,并且在x=0.06附近,剩磁有一个极值,饱和磁化强度减少不多。
关键词:
Nd-Fe-B合金
,
magnetic properties
,
Curie temperature
门德
,
松林
,
伊博乐
,
刘璟芳
,
伊日勒图
,
特古斯
稀有金属
doi:10.3969/j.issn.0258-7076.2010.01.027
研究了1:1型MnP基系列合金MnP_(1-x)M_x(M=Si,Sb,Ge,Zn,Sn)(x=0,0.1)的结构及其磁热效应.室温X射线衍射表明该系列合金的主相结构均为正交MnP结构,空间群为Pnma.在用Ce,Sb,Zn,Sn作为替代元素的合金中存在少量第二相Mn_(5.64) P_3.磁性测量表明该系列合金MnP_(1-x)M_x(M=Si,Sb,Ge,Zn,Sn)(x=0,0.1)的存在由铁磁-顺磁的二级相变.其居里温度T_c分别为286,295,291,295,295 K.通过磁化曲线计算了MnP_(1-x)M_x(M=Si,Sb,Ge,Zn,Sn)(x=0,0.1)合金的最大等温磁熵变-△S_m,均在0.7-1.3 J·kg~(-1)·K~(-1)之间.
关键词:
合金
,
磁制冷
,
磁热效应
,
磁熵变
王龙章
,
黄克雄
,
骆如铁
,
姚渝
,
叶大陆
,
陈新民
金属学报
本文讨论了双金属共存体系M_1-M_2-x-y,当两种金属的化合物相互作用生成多金属化合物时,优势区相图的绘制原理、方法及计算机程序。通过绘制Zn-Fe-SO系的优势区相图,分析了ZnO·Fe_2O_3的生成及稳定条件,并说明了其在硫化锌矿焙烧中的指导作用。
关键词:
M_1-M_2-x-y体系
,
predominance diagram
,
roasting
,
zinc sulfide ore