J.S.Lu 1)
,
I.Odneval 2) and C.Leygraf 2) 1) College of Chemical Engineering
,
Zhejiang University of Technology
,
Hangzhou 310032
,
China 2) Department of Material Science and Engineering
,
Royal Institute of Technology
,
Stockholm
,
100 44
,
Sweden
金属学报(英文版)
Atmospheric corrosion of 304 and 316 stainless steels was studied by field exposure test, in which rain water was collected and analyzed by atomic absorption spectroscope (AAS). Emphasis was put on the dissolution of chromium and nickel from the stainless steels by atmospheric corrosion and rain runoff. AAS analyses shows that the amounts of yearly chromium and nickel dissolution were less than 150ng/cm 2 and 50ng/cm 2 respectively for both 304 and 316 stainless steels. XPS analysis reveals the marked Cr enrichment on the 316 stainless steel after one year field exposure. SEM shows the morphology of corrosion pits on the steel surfaces.
关键词:
atmospheric corrosion
,
null
,
null
,
null
QIAO Lijie LIU Rui XIAO Jimei University of Science and Technology Beijing
,
Beijing
,
China
金属学报(英文版)
The effects of stress components on nucleation sites and propagation directions of stress cor- rosion cracks in brass were investigated with specimens under mode Ⅱ and mode Ⅲ loadings. The results indicated that under mode Ⅱ loading,stress corrosion cracks nucleated on the site with maximum normal stress component and propagated along the plane perpendieular to the maximum normal stress,under mode Ⅲ loading,the stress corrosion crack was not evident on the 45°plane due to the general corrosion in aqueous solution with high NH_4OH concentra- tion,while stress corroded in aqueous solution with low NH_4OH concentration, numerous cracks with spacings of 10—150μm were found on the 45°plane with maximum normal stress and no stress corrosion cracks was observed on the plane with maximum shear stress.
关键词:
stress corrosion cracking
,
null
,
null
,
null
Fang Geng
材料科学技术（英文）
Three-dimensional honeycomb-structured magnesium (Mg) scaffolds with interconnected pores of accurately
controlled pore size and porosity were fabricated by laser perforation technique. Biodegradable and bioactive β-
tricalcium phosphate (β-TCP) coatings were prepared on the porous Mg to further improve its biocompatibility,
and the biodegradation mechanism was simply evaluated in vitro. It was found that the mechanical properties
of this type of porous Mg significantly depended on its porosity. Elastic modulus and compressive strength
similar to human bones could be obtained for the porous Mg with porosity of 42.6%-51%. It was observed
that the human osteosarcoma cells (UMR106) were well adhered and proliferated on the surface of the β-
TCP coated porous Mg, which indicates that the β-TCP coated porous Mg is promising to be a bone tissue
engineering scaffold material.
关键词:
Magnesium
,
Bone tissue engineering
,
β-TCP coating
,
Biocompatibility
材料科学技术（英文）
Three-dimensional honeycomb-structured magnesium (Mg) scaffolds with interconnected pores of accurately controlled pore size and porosity were fabricated by laser perforation technique. Biodegradable and bioactive beta-tricalcium phosphate (beta-TCP) coatings were prepared on the porous Mg to further improve its biocompatibility, and the biodegradation mechanism was simply evaluated in vitro. It was found that the mechanical properties of this type of porous Mg significantly depended on its porosity. Elastic modulus and compressive strength similar to human bones could be obtained for the porous Mg with porosity of 42.6%-51%. It was observed that the human osteosarcoma cells (UMR106) were well adhered and proliferated on the surface of the beta-TCP coated porous Mg, which indicates that the beta-TCP coated porous Mg is promising to be a bone tissue engineering scaffold material.
关键词:
Magnesium;Bone tissue engineering;beta-TCP coating;Biocompatibility;simulated body-fluid;mechanical-properties;cancellous bone;foam;scaffolds;magnesium;hydroxyapatite;porosity;bioceramics;fabrication;ph
American Mineralogist
A natural high-pressure phase of titanium oxide with alpha-PbO2-structure has been found in omphacite from coesite-bearing eclogite at Shima in the Dabie Mountains, China. High-resolution transmission electron microscope observations have revealed an orthorhombic lattice, corresponding to alpha-PbO2-type TiO2, with cell parameters a = 0.461 nm, b = 0.540 nm, c = 0.497 nm and space group Pbcn. It occurs as nanometer-thick (< 2 nm) lamellae between multiple twinned rutile crystals, providing additional evidence of very high-pressure, metamorphism at 7 GPa, 900 degrees C. This implies subduction of continental material to a depth of more than 200 kilometers. alpha-PbO-type TiO2 could be an extremely useful index mineral for ultrahigh-pressure.
关键词:
high-pressure phase;ries crater;rutile;polymorph;titanium
