G.J. Xu
,
D.H. Li
,
J.C. He
金属学报(英文版)
In order to know the distribution of magnetic field in a novel flow control of mold(NFC Mold) and to provide the experimental data for the electromagnetic structuredesign and the analysis of flow control in continuous casting mold, the magnetic fieldin a NFC Mold were measured by Tesla meter of Model CT-3. The method of vectorsynthesis was adopted in the measurement of magnetic fields. The results showed thatthe magnetic field in the NFC Mold was composed of two main magnetic areas thatwere symmetrical. Although there was leaking magnetic flux between the lower surfaceof the upper pole and the upper surface of the lower pole on the sides, it was restrainedby the main magnetic fields effectively. Therefore the NFC Mold was more preferablysatisfied to be used in controlling the molten steel flow in continuous casting mold.
关键词:
continuous casting
,
null
,
null
,
null
李志宏
,
柳卫平
,
白希祥
,
郭冰
,
连钢
,
颜胜权
,
王宝祥
,
陆昀
,
曾晟
,
苏俊
原子核物理评论
doi:10.3969/j.issn.1007-4627.2005.01.006
利用8Li次级束测量了质心系能量7.8 MeV 2H(8Li, 9Li)1H反应的角分布, 导出了8Li(d, p)9Li反应的天体物理S因子及9Li→8Li+n虚衰变的渐近归一化系数.
关键词:
8Li(d,p)9Li反应
,
角分布
,
天体物理S因子
,
渐近归一化系数
Journal of Materials Research
The effect of Li(3)N additive on the Li-Mg-N-H system was examined with respect to the reversible dehydrogenation performance. Screening Study with varying Li(3)N additions (5, 10, 20, and 30 mol%) demonstrates that all are effective for improving the hydrogen desorption capacity. Optimally, incorporation of 10 mol% Li(3)N improves the practical capacity from 3.9 wt% to approximately 4.7 wt% hydrogen at 200 degrees C, which drives the dehydrogenation reaction toward completion. Moreover, the capacity enhancement persists well over 10 de-/rehydrogenation cycles. Systematic x-ray diffraction examinations indicate that Li(3)N additive transforms into LiNH(2) and LiH phases and remains during hydrogen cycling. Combined structure/property investigations suggest that the LiNH(2) "seeding" should be responsible for the capacity enhancement, which reduces the kinetic barrier associated with the nucleation of intermediate LiNH(2). In addition, the concurrent incorporation of LiH is effective for mitigating the ammonia release.
关键词:
complex hydrides;improvement;mixtures;imides;amide;h-2
孟建波
,
桑革
,
薛炎
,
曹伟
,
叶小球
应用化学
doi:10.3969/j.issn.1000-0518.2007.12.017
将固体聚合物电解质(SPE)水电解技术应用于H/D同位素分离,考察了电极材料、电流密度和温度对分离系数(α)的影响.在40 ℃、90×10-3 A/cm2条件下,得到IrRu/Nafion117/PbAg、IrRu/Nafion117/TiNi3、IrRu/Nafion117/Ni和C/Nafion112/Pt-TiO2三合一电极(MEA)的H/D分离系数α分别为4.49、3.48、3.14和4.53.对IrRu/Nafion117/PbAg电极研究结果为:电流密度分别为90×10-3、150×10-3和300×10-3 A/cm2,40 ℃时分离系数α分别为4.49、4.65、5.46,60 ℃时分别为3.76、4.11、4.38;温度分别为40、60和70℃,电流密度为90×10-3 A/cm2条件下,分离系数α分别为4.49、3.76、3.53,ln α～103/T的拟合直线为ln α=0.816×(103/T)-1.112.在40～70 ℃范围内反应的活化能-△Ha约为6 778 J/mol.结果表明,分离系数α随电流密度增加而增大,随温度升高而减小.此外,分析了Nafion膜中在H/D传输的同位素效应.
关键词:
固体聚合物电解质
,
水电解
,
电催化剂
,
氢同位素
,
分离
Journal of Physical Chemistry C
The Li-Mg-N-H system was prepared by reacting magnesium amide [Mg(NH(2))(2)] with lithium nitride (Li(3)N) and investigated with regard to the hydrogen storage properties. Our study shows that the present method is superior to the conventional route in enhancing the reversible dehydrogenation properties. Through optimizing the Li(3)N:Mg(NH(2))(2) ratio in the starting materials, the reversible capacity of U-Mg-N-H system increases to 4.9 wt %, 18% higher than that typically obtained from the Mg(NH(2))(2) + 2LiH mixture at 200 degrees C. Furthermore, increasing the Li(3)N:Mg(NH(2))(2) ratio is effective for mitigating the ammonia release from thus-prepared samples. Combined property/structure investigations indicate that the obtained enhancements should be ascribed to the effects of LiNH(2) and LiH that were in situ generated from the excess Li(3)N. LiNH(2) may promote the dehydrogenation reaction via seeding the reaction intermediate. The concurrently generated LiH acts as an effective ammonia trapping agent. These findings highlight the potential of "intermediate seeding" as a strategy to enhance the reversible hydrogen storage properties of metal-N-H systems.
关键词:
complex hydrides;ultrafast reaction;amide;improvement;desorption;linh2;destabilization;mechanism;mixtures;imides
裴增文
,
刘晓鹏
,
黄倬
,
李志念
,
王树茂
,
蒋利军
稀有金属
doi:10.3969/j.issn.0258-7076.2010.04.013
采用等容法研究了机械球磨工艺制备的Li-Mg-N-H材料储氧性能,结果发现,在室温下采用氦气对样品室体积进行标定时,由于Li-Mg-N-H材料对氦气有一定量的物理吸附,造成准确Li-Mg-N-H材料样品体积标定误差,进而造成Li-Mg-N-H储氢材料在503 K下放氢容量随压力的降低而增加异常变化.为准确标定样品体积,通过对Li-Mg-N-H材料室温氮气吸附容量测定,并采用迭代计算方法获得准确的储氢材料样品体积,进而测定Li-Mg-N-H储氢材料503 K下放氢PCT曲线,其表现为放氢容量随压力降低而减小的正常变化规律.Li-Mg-N-H储氢材料503 K,9.6 MPa氢压下的最大储氢容量为4.81%(质量分数),放氢过程表现为单一放氢平台特性.
关键词:
轻质储氢材料
,
Li-Mg-N-H
,
储氢性能
,
等容测试方法
Journal of Alloys and Compounds
Motivated by the ion migration mechanism proposed by David et al. [J. Am. Chem. Soc. 129 (2007) 1594-1601], we mechanically mill the Li3N/Co powder mixture to obtain defective Li3N-type structure with enhanced Li+ mobility. Compared with Li3N the hydrogen storage property of such defective phase is markedly improved, presumably due to the ion-migration-enhancing effect from the incorporation of Co and Fe (from milling utensils). During subsequent cycling, however, this effect cannot persist due to the precipitation of Co-Fe alloy upon hydrogenation. The close correlation between Co-Fe incorporation/precipitation and property variation of Li3N hydrogen storage material provides a preliminary evidence to support the ion migration mechanism. (C) 2007 Elsevier B.V. All rights reserved.
关键词:
Hydrogen absorbing materials;Nitride materials;hydrogen-storage;lithium amide;mechanism;nitride;batteries;mixtures;hydride;imides;linh2;anode
Energy & Environmental Science
The Li-Mg-B-H system that is prepared from 2LiH + MgB(2) or 2LiBH(4) + MgH(2) possesses high hydrogen capacity and relatively favorable thermodynamics, but it is greatly restricted in practical hydrogen storage applications by problematic H-exchange kinetics. In the present study, TiF(3) was mechanically milled with a 2LiH + MgB(2) mixture and examined with respect to its effect on reversible dehydrogenation of the Li-Mg-B-H system. Experimental study showed that TiF(3) is highly effective for promoting the two-step dehydrogenation reaction in the Li-Mg-B-H system. Compared to the neat 2LiH + MgB(2) sample, the 2LiH + MgB(2) + 0.01TiF(3) sample exhibits significantly reduced dehydrogenation temperature and markedly enhanced dehydriding rate at both steps. Furthermore, the catalytic enhancement arising upon adding TiF(3) additive was observed to persist well in the hydrogenation/dehydrogenation cycles. Based on the results of phase analysis and a series of designed experiments, the mechanism underlying the observed property improvement is discussed.
关键词:
complex hydrides;libh4;tif3;kinetics;naalh4
米菁
,
郝雷
,
刘晓鹏
,
杜淼
,
蒋利军
,
王树茂
金属功能材料
doi:10.13228/j.boyuan.issn1005-8192.2015053
基于对Li-Mg N-H体系放氢动力学机理的研究发现,其放氢过程的速率控制步骤是Li+、H+或H-的扩散.在实验中,原位析出的Li3Bi相增加了Li-Mg-N-H体系放氢过程中Li+离子的扩散速率,进而使得该体系在200℃下放氢量(质量分数)从4.37％增加到4.55％,达到90％放氢量的放氢时间从298 min缩短到11 min.
关键词:
储氢材料
,
Li-Mg-N-H Li3Bi
,
放氢
赵中伟
,
刘旭恒
中国有色金属学报
运用同系线性规律对Li-Fe-P-H2O系中缺少的LiFePO4和Li3PO4的△GΘ进行估算.结合已有的热力学数据,运用ψ-pH图的绘制原理,得到25℃时Li-Fe-P-H2O系在不同浓度下的ψ-pH图.结果表明,在水溶液中,LiFePO4具有较大的热力学稳定区域,这对湿法制备LiFePO4很有利.根据所绘制的热力学平衡图,详细讨论了各种LiFePO4软化学制备方法的可行性途径,并就液相法制备LiFePO4可能的技术途径和条件进行分析,为在水溶液中用软化学法制备LiFePO4提供理论依据.
关键词:
Li-Fe-P-H2O系
,
磷酸铁锂
,
热力学
