Y.D.Xiao
,
W.X.Li
,
D.Jacovkis
,
M.T.Clavaguera-Mora
,
J.Rodriguez-Viejo
,
N.Clavaguera
金属学报(英文版)
Rapidly solidified Al87Ni7Cu3Nd3 metallic glasses, prepared by using melt spinning, were treated under both isothermal and non-isothermal regime. The amorphous rib-bon and the annealed samples were closely examined by means of differential scan-ning calorimetric, conventional X-ray diffraction and high resolution transmission electron microscopy with selected-area electron diffraction, with special interest in pri-mary crystallization into α-Al nanocrystalline particles, in order to understand struc-tural characteristics of Al-based amorphous/nanocrystalline alloys, and nucleation and grain growth mechanism on the nanometer scale during primary crystallization. The results show that, the as-prepared ribbons are fully amorphous and homogeneous in the micron scale, but contain high density of quenched-in clusters or crystallite embryos. Primary crystallization mainly leads to formation of two-phase mixture of α-Al crystal and residual amorphous phase. The annealed ribbons exposed isother-mally at 110℃ for 5, 130 minutes and heated continuously up to less than 310℃ at 40℃/min consist of large amount of α-Al fec crystal nanoparticles dispersed uni-formly in an amorphous matrix. However, a very little amount of finer orthorhombic Al3Ni intermetalics particles exist in the annealed ribbons heated up to 310℃. During primary crystallization, the leading kinetic mechanics to impede growth of the α-Al crustal is soft impinaement, instead of geometric impinqement.
关键词:
rapid solidification
,
null
,
null
Physical Review B
In the investigation of the optical and magnetic properties of the semiconductors containing transition-metal ions, the one-electron orbital cannot be treated with a pure d orbital because of a strong covalence. This paper presents the energy matrix of the d*(8) and d*(2) (d* means a modified d function) system, in which the covalence is described by two covalent factors. The differences between the matrix diagonal elements of the t(2)(m)e(n) term of the d*(8) system and the t(2)(6-m)e(4-n) term of the d*(2) system vary with m and n. The d(N) electron system can be explained with the d(10-N) hole system because the difference between the energy matrix of the d(N) and d(10-N) systems has a fixed value. However, this kind of simple relation does not exist for the d*(N) and d*(10-N) systems when the covalence is considered. A numerical calculation shows that the variation of the energy levels with the covalence for Ni2+ in the d*(8) electron system is larger than that in the d*(2) hole system. The calculated energy levels obtained from the d*(8) matrix are in good agreement with the experimental data of the Ni2+ ion for ZnS:Ni and ZnSe:Ni. This suggests that the d*(8) electron system instead of the d*(2) hole system should be used in the investigation of optical and magnetic properties of semiconductor containing Ni2+ ions.
关键词:
zns-ni;absorption;vanadium;impurities;spectra;ions
张兴
,
郑成武
,
李宁
,
周兴丹
,
李正强
,
华瑞茂
液晶与显示
doi:10.3788/YJYXS20122704.0448
介绍了3D显示的基本原理,重点介绍了目前3D显示的主流技术类型,包含了眼镜式3D技术以及裸眼式3D技术,其中眼镜式3D技术包含色差式3D技术、偏光式3D技术和主动快门式3D技术;裸眼式3D技术包含视差屏障式3D技术、柱状透镜式3D技术、指向光源式3D技术和多层显示式3D技术.阐述了各种3D显示技术的基本实现原理和应用领域、并对涉及液晶显示的几种3D技术的优缺点进行了对比.结合液晶材料的特点与3D液晶显示的实际要求,阐述了3D液晶面板对液晶材料快速响应方面的要求,以及液晶透镜对液晶材料光学各向异性参数的要求.
关键词:
3D显示
,
眼镜式3D显示
,
裸眼式3D显示
,
液晶材料
D.Han
,
S.R.Qiao
,
M.Li
,
J.T.Hou
,
X.J.Wu
金属学报(英文版)
The differences of tension-tension fatigue and tensile creep characters of 2D-C/SiC and 3D-C/SiC composites have been scrutinized to meet the engineering needs. Experiments of tension-tension fatigue and tensile creep are carried out under vacuum high temperature condition. All of the high temperature fatigue curves are flat; the fatigue curves of the 2D-C/SiC are flatter and even parallel to the horizontal axis. While the tension-tension fatigue limit of the 3D-C/SiC is higher than that of the 2D-C/SiC, the fiber pullout length of the fatigue fracture surface of the 3D-C/SiC is longer than that of the 2D-C/SiC, and fracture morphology of the 3D-C/SiC is rougher, and pullout length of the fiber tows is longer. At the same time the 3D-C/SiC has higher tensile creep resistance. The tensile curve and the tensile creep curve of both materials consist of a series of flat step. These phenomena can be explained by the non-continuity of the damage.
关键词:
2D-C/SiC
,
null
,
null
杨孟孟
,
罗旭东
,
谢志鹏
人工晶体学报
本文介绍了陶瓷3D打印技术目前的发展状况、主要的成型技术和重要的应用领域，重点介绍3D打印技术在陶瓷方向的应用。回顾了可适用于直接三维打印和立体光固化法打印的氧化物( Al2 O3、ZrO2)和非氧化物( Si3 N4、SiC)陶瓷浆料的最新研究成果及成型技术对制品性能的影响，并展望了陶瓷3D打印技术未来的发展方向。
关键词:
3D打印
,
陶瓷
,
浆料
,
成型技术
Nanostructured Materials
The Landauer electrical resistivity R of one-dimensional (1D) layered nanostructures is calculated. The analysis of the logarithm of the resistance as a function of grain size reveals that there is a minimum value of resistivity R(min) when the grain size takes a value of d(c), where d(c) depends on the barrier height and excess volume of interface. R increases in the region of d(cl) > d > d(c), where d is the grain size, and d(cl) is another critical value of grain size. The mechanism of the anomalous resistivity behavior is discussed briefly.
关键词:
nanocrystalline;resistance;alloys
