材料期刊网

PECVD OF HARD AND ELASTIC BCN COATINGS

R.Cremer , D.Kurapov , C.Martinez , O.Kyrylov , D.Neuschütz

金属学报(英文版)

Compounds of the B-C-N system are very promising to produce superhard coatings with good tribological, chemical and thermal properties. Consequently, BCN films were prepared by plasma enhanced chemical vapor deposition (PECVD). The films were deposited from gaseous mixtures of BCl3-C2H4-N2-H2-Ar in different unipolar and bipolar pulsed glow discharges at 550G and analyzed with respect to composition, electronic structure and mechanical properties. The microstructure and composition of the BCN films were determined by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and reflection electron en- ergy loss spectroscopy (REELS). Mechanical properties were characterized using both the traditional Vickers method and nanoindentation. The films, that were deposited using a bipolar pulsed generator, were weak and had a sponge-like structure, whereas the films prepared using an unipolar generator were well adherent, had a hardness of more than 11GPa and very high elastic recoveries of up to 80%. The elasticity properties supposedly result from the formation of a fullerene-like structure.

关键词: boron carbonitride , null , null , null , null

A COMBINATORIAL APPROACH TO THE OXIDATION RESISTANCE OF(Ti,Al)N AND Ti-Al-Si-N HARD COATINGS

R.Cremer , D.Neuschütz

金属学报(英文版)

The increasing complexity of modern functional materials leads to the demand of acost efficient tool for the development of new products. One possible approach to thisquestion is the adaptation of combinatorial methods to the specific requirements of ma-terials industry. These methods, originally developed for the pharmaceutical industry,have recently been applied to the screening of superconductive, magnetoresistant andphotoluminescent materials. The principle of these combinatorial approaches is thedeposition of large materials libraries in one process combined with fast methods forthe determination of the resulting properties. In this paper, the deposition and charac-terization of laterally graded materials libraries (composition spread) is presented. Thefilms have been deposited by reactive magnetron sputtering, using two or three metallictargets at a low angle to the substrate surface as well as a system of apertures. Toillustrate the advantages of combinatorial approaches for the development of advancedmaterials, the multicomponent metastable hardcoatings (Ti, Al)N and Ti-Al-Si-N arediscussed with special emphasis on the relations between structure and composition onthe one hand and the oxidation resistance of these coatings on the other. The resultsillustrate that the composition spread approach is a powerful and cost efficient tool forthe development and optimization of new multicomponent functional materials.

关键词: combinatorial chemistry , null , null , null

BIPOLAR PULSED PECVD OF ALUMINA HARD COATINGS

O.Kyrylov , R.Cremer , D.Neuschütz

金属学报(英文版)

In the last years a variety of plasma sources have been developed for film depositionby plasma activated deposition techniques. In addition to RF- and DC-sources, pulsedplasma sources are gaining increased attention. This interest is driven by the wish ofdepositing coatings with superior properties as compared to those deposited by conven-tional techniques. One prominent example of coatings that are significantly enhancedby the usage of pulsed plasmas is alumina. Although crystalline α-alumina can be de-posited by thermal CVD at temperatures above 1000℃ for two decades, no process forthe deposition of crystalline alumina on heat sensitive substrates like tempered steelsat low temperatures is commercially available up to now. In this paper, the depositionof alumina films from gaseous mixtures of AlCls-N2-H2-Ar in a bipolar pulsed glowdischarge at about 500℃ is reported. Special attention was paid on the correlation be-tween plasma characteristics and film properties. The measurements revealed that theproperties of the resulting coatings were significantly influenced by the characteristicsof the power supply. Depending on the gas composition and the plasma parameters,alumina films with high hardness and good adhesion were deposited.

关键词: alumina , null , null , null

热压烧结TZ3Y20A-SrSO4陶瓷基复合材料的高温摩擦学性能

刘虹志 , 欧阳家虎 , 李玉峰

材料热处理学报

采用化学沉淀法制备出粒径约80nm的等轴状SrSO4粉体.选用ZrO2(3mol%Y2O3)-20wt%Al2O3(TZ3Y20A)陶瓷为基体,采用热压烧结法制备出TZ3Y20A-SrSO4陶瓷基复合材料,并对复合材料的组织结构和力学件能进行了研究.采用球盘式高温摩擦磨损试验机测定复合材料从室温到800℃的摩擦学性能.TZ3Y20A-SrSO4复合材料在室温至800℃范围内摩擦系数在O.31～O.42之间,磨损率为10-5mm3/Nm数量级.加入SrSO4后复合材料的磨损表面形成了一层润滑膜,有效地改善了其高温摩擦磨损性能.

关键词: 陶瓷基复合材料 , SrSO4纳米粉体 , 热压烧结 , 高温摩擦学性能

Energy levels of the d*(8) electron and d*(2) hole system

Physical Review B

In the investigation of the optical and magnetic properties of the semiconductors containing transition-metal ions, the one-electron orbital cannot be treated with a pure d orbital because of a strong covalence. This paper presents the energy matrix of the d*(8) and d*(2) (d* means a modified d function) system, in which the covalence is described by two covalent factors. The differences between the matrix diagonal elements of the t(2)(m)e(n) term of the d*(8) system and the t(2)(6-m)e(4-n) term of the d*(2) system vary with m and n. The d(N) electron system can be explained with the d(10-N) hole system because the difference between the energy matrix of the d(N) and d(10-N) systems has a fixed value. However, this kind of simple relation does not exist for the d*(N) and d*(10-N) systems when the covalence is considered. A numerical calculation shows that the variation of the energy levels with the covalence for Ni2+ in the d*(8) electron system is larger than that in the d*(2) hole system. The calculated energy levels obtained from the d*(8) matrix are in good agreement with the experimental data of the Ni2+ ion for ZnS:Ni and ZnSe:Ni. This suggests that the d*(8) electron system instead of the d*(2) hole system should be used in the investigation of optical and magnetic properties of semiconductor containing Ni2+ ions.

关键词: zns-ni;absorption;vanadium;impurities;spectra;ions

液晶材料与3D显示

张兴 , 郑成武 , 李宁 , 周兴丹 , 李正强 , 华瑞茂

液晶与显示 doi:10.3788/YJYXS20122704.0448

介绍了3D显示的基本原理,重点介绍了目前3D显示的主流技术类型,包含了眼镜式3D技术以及裸眼式3D技术,其中眼镜式3D技术包含色差式3D技术、偏光式3D技术和主动快门式3D技术;裸眼式3D技术包含视差屏障式3D技术、柱状透镜式3D技术、指向光源式3D技术和多层显示式3D技术.阐述了各种3D显示技术的基本实现原理和应用领域、并对涉及液晶显示的几种3D技术的优缺点进行了对比.结合液晶材料的特点与3D液晶显示的实际要求,阐述了3D液晶面板对液晶材料快速响应方面的要求,以及液晶透镜对液晶材料光学各向异性参数的要求.

关键词: 3D显示 , 眼镜式3D显示 , 裸眼式3D显示 , 液晶材料

COMPARISON OF FATIGUE AND CREEP BEHAVIOR BETWEEN 2D AND 3D-C／SiC COMPOSITES

D.Han , S.R.Qiao , M.Li , J.T.Hou , X.J.Wu

金属学报(英文版)

The differences of tension-tension fatigue and tensile creep characters of 2D-C/SiC and 3D-C/SiC composites have been scrutinized to meet the engineering needs. Experiments of tension-tension fatigue and tensile creep are carried out under vacuum high temperature condition. All of the high temperature fatigue curves are flat; the fatigue curves of the 2D-C/SiC are flatter and even parallel to the horizontal axis. While the tension-tension fatigue limit of the 3D-C/SiC is higher than that of the 2D-C/SiC, the fiber pullout length of the fatigue fracture surface of the 3D-C/SiC is longer than that of the 2D-C/SiC, and fracture morphology of the 3D-C/SiC is rougher, and pullout length of the fiber tows is longer. At the same time the 3D-C/SiC has higher tensile creep resistance. The tensile curve and the tensile creep curve of both materials consist of a series of flat step. These phenomena can be explained by the non-continuity of the damage.

关键词: 2D-C/SiC , null , null

Surface properties of 3d transition metals

Philosophical Magazine

Using the projector augmented wave method within density functional theory, we present a systematic study of the layer relaxation, surface energy and surface stress of 3d transition metals. Comparing the calculated trends for the surface energy and stress with those obtained for 4d and 5d metals we find that magnetism has a significant effect on the surface properties. Enhanced surface magnetic moments decrease the size of the surface relaxation, lower the surface energy and surface stress, leading to compressive stress in Cr and Mn.

关键词: surface relaxation;surface energy;surface stress;magnetic transition;metals;density functional theory;full charge-density;initio molecular-dynamics;total-energy;calculations;augmented-wave method;ab-initio;electronic-structure;atomic volume;work function;basis-set;relaxation

R&D STATUS ON INTERMETALLICS IN CHINA

CHEN Guoliang(State Key Laboratory for Advanced Metals and Materials University of Science and Technology Beijing Beijing 100083 , China)SHI Changxu (Academia Sinica , Beijing 100864 , China)

金属学报(英文版)

This paper briefiy introduces the R&D of intermetallics in China. R&D on intermetallics in a national scale in China began near ten years ago. The investigation in past years focused on the fundamental research and materials development. A significant progress has been made. Various components that made of Ti3Al Ni3Al, TiAl and Fe3Al have been successfully manufactured Some of them have been evaluted. It is expected that some intermetallic alloys will be produced in an industrial scale in the near future.

关键词: :intermetallic alloys , null , null , null

R & D ACTIVITIES ON AEROSPACE MATERIALS IN KOREA

H.M. Kim(Korea Institute of Machinery and Materials , Korea Manuscript received 26 August 1996)

金属学报(英文版)

This paper briefly reviews research and development programs in Korean aerospace industry,with an emphasis on aircraft materials technology. International collaborations in these areas are outlined and the R & D activities are highlighted against the　background of the national economy.It is shown that the investment from government agencies and large enterprises has led to healthy development of aerospace materials industries in Korea.

关键词: :R & D , null , null , null