欢迎登录材料期刊网

材料期刊网

高级检索

  • 论文(18775)
  • 图书()
  • 专利()
  • 新闻()

STUDY ON PREPARATION OF SUPPORTED ALUMINA MEMBRANE USING SOL GEL METHOD

W.L. Zhang , B.Q. Jiang , Y.S. Sun , F. Lin and L. Gu Chemical Engineering Department of Nanchang University , Nanchang 330029 , China

金属学报(英文版)

A stable colloidal boehmite sol was made with the aluminium iso propoxide made in China and used to prepare the supported γ alumina membrane using sol gel method. The γ alumina thin layer was characterized by SEM, N 2 sorption method and permeation measurement. The γ alumina membrane was prepared with uniform surface, thickness of 3 μm and average diameter of about 5 nm. The permeabilities of the single gases of H 2, N 2, Ar and their separation factors were measured. The experimental data explained a behavior of Knudsen diffusion for the gas transport through the thin membrane.

关键词: boehmite , null , null , null

STATISTICAL EVALUATION OF CRITICAL INCLUSION FACTOR FOR SECONDARY RECRYSTALLIZATON IN 3%Si STEEL Lecturer,Department of Materials Engineering,Southwestern Jiaotong University,Chengdu 610031,China

LI Shuchen Southwestern Jiaotong University , Chengdu , ChinaCHEN Mengzhe KE Jun University of Science and Technology Beijing , Beijing , China

金属学报(英文版)

On the basis of statistical data of MnS in the conventional 3% Si steel sheeets after various annealing processes,the critical inclusion factor has been evaluated to be 20 mm~(-1).The inhi- bition of MnS to grain growth has been exactly described.

关键词: 3%Si steel , null , null

Fe2+对嗜铁钩端螺旋菌L. ferriphilum生长活性的影响

高健 , 康健 , 吴学玲 , 徐競 , 李邦梅 , 邱冠周

中国有色金属学报

以分离于江西某铜矿的嗜铁钩端螺旋菌(L. ferriphilum YSK)菌株为研究对象,报道不同Fe2+浓度对 L. ferriphilum生长活性的影响.结果表明,YSK菌株生长最适宜的Fe2+浓度约为0.1 mol/L.当初始Fe2+浓度为0.4 mol/L时,进入对数生长期前很明显需要一个较长的延迟期,表明该Fe2+浓度对细胞的生长产生较强的抑制作用;当初始Fe2+浓度为0.6 mol/L时,YSK菌株的生长完全受到抑制.尽管高浓度的Fe2+抑制细胞的生长,但受到抑制而不生长繁殖的YSK细胞仍然具有氧化Fe2+的能力.

关键词: L.ferriphilum YSK菌株 , Fe2+ , 生长活性

CORRELATION BETWEEN STRESS COMPONENTS AND STRESS CORROSION CRACKS IN BRASS Lecturer,Department of Materials Physics,University of Science and Technology Beijing,Beijing 100083,China

QIAO Lijie LIU Rui XIAO Jimei University of Science and Technology Beijing , Beijing , China

金属学报(英文版)

The effects of stress components on nucleation sites and propagation directions of stress cor- rosion cracks in brass were investigated with specimens under mode Ⅱ and mode Ⅲ loadings. The results indicated that under mode Ⅱ loading,stress corrosion cracks nucleated on the site with maximum normal stress component and propagated along the plane perpendieular to the maximum normal stress,under mode Ⅲ loading,the stress corrosion crack was not evident on the 45°plane due to the general corrosion in aqueous solution with high NH_4OH concentra- tion,while stress corroded in aqueous solution with low NH_4OH concentration, numerous cracks with spacings of 10—150μm were found on the 45°plane with maximum normal stress and no stress corrosion cracks was observed on the plane with maximum shear stress.

关键词: stress corrosion cracking , null , null , null

  • 首页
  • 上一页
  • 1
  • 2
  • 3
  • 4
  • 5
  • 下一页
  • 末页
  • 共1878页
  • 跳转 Go

出版年份

刊物分类

相关作者

相关热词