G.X.Wang
,
Steve Bewlay
,
L.Yang
,
J.Z.Wang
,
Y.Chen
,
Jane Yao
,
H.K.Liu
,
S.X.Dou
材料科学技术（英文）
Nanocrystalline LiFePO4 and Si-C powders were prepared as electrode materials for lithium-ion batteries. Near full capacity (170 mAh/g) was achieved at the C/8 rate at room temperature for LiFePO4 electrodes. Nanosize Si-C composite anode materials demonstrated a reversible lithium storage capacity of 1450 mAh/g with good cyclability when used as anodes in lithium-ion cells. Nanostructured electrode materials have an important role to play in developing a new generation of lithium-ion batteries that will offer a dramatic improvement in power delivery.
关键词:
Lithium-ion battery
,
null
,
null
,
null
Journal of Materials Research
The morphology of the dark and bright regions observed by transmission electron microscopy for the Zr(64.13)Cu(15.75)Ni(10.12)Al(10) bulk metallic glass strongly depends on the ion beam parameters used for ion milling. This indicates that the ion beam could introduce surface fluctuation to metallic glasses during ion milling.
关键词:
room-temperature
Physical Review B
The Hamiltonian for a four-sublattice Heisenberg ferrimagnet or ferromagnet with different exchange constants (J(ab) = J(cd) not equal J(bc) = J(da)) was established. An extended Bogoliubov transformation was developed by solving an equation group, consisting of 20 equations and 20 unknowns. The procedure for solving the equation group was carried out by introducing a simple way of reducing the numbers of the equations and the unknowns. The spin-wave spectra in the present system have been determined by performing the standard Holstein-Primakoff transformation and the Bogoliubov one. It has been found that the spin-wave spectra of the present system depend on the exchange constants and that the degeneracy of the spin-wave spectra remains. The results for a special case (J(ab) = J(bc)) i.e., an antiferromagnet are discussed briefly. The spin-wave spectra of the four-sublattice Heisenberg antiferromagnet are found to be degenerative also and they are linear in k for small k.
关键词:
model
Y.G. Cao
,
X.Y. Sun
金属学报(英文版)
J-integral and crack opening displacement δ(COD) were important parameters for characterization of fractures in engineering materials. The relationship between J-integral and COD has been investigated for a long time and was enerally represented as J = m σyδ, where σy is the yield strength and m is a function of specimen geometry and material properties. To determine the value of m, extensive studies and experiments have been performed. The method that used the fracture-surface topography analysis (FRASTA) for determining J-integral from fracture surfaces of materials was introduced. On the basis of the relationship between COD and fracture surface average profile, the relationship between J-integral and COD was deduced and compared with the generally used equation. The method was experimentally confirmed to be able to provide a new way to determine the relationship between J-integral and COD.
关键词:
FRASTA
,
null
,
null
唐郑磊
,
张涛
,
杨东
,
李红洋
,
徐昭
,
庞林
钢铁研究
通过成分设计、轧制、热处理工艺设计,采用晶粒细化、固溶强化、析出强化等手段,对80、110mm的Q460GJC-Z35高强度钢板的研发工艺及过程进行试验设计。结果表明：通过Nb、V、Ti、Ni复合微合金化和控轧控冷、正火快冷（NAC）热处理相结合生产的模铸Q460GJE-Z35钢板具有晶粒细小、组织均匀,钢板屈服强度达到420~490 MPa,抗拉强度达到585~625 MPa,伸长率达到20%以上,0℃冲击功达到123 J以上,Z向断面收缩率大于35%,探伤达到1级探伤要求,实现了强度和韧性的良好匹配和较高的内部质量。
关键词:
Q460GJC-Z35
,
成分设计
,
热处理工艺设计
null
,
null
金属学报
在工程上,经常由于应力腐蚀开裂和氢脆引起中强度钢结构件发生滞后破坏。这类脆断往往从结构件中预先存在的疲劳或焊接裂纹处开始,因此,运用传统的光滑试样的检验方法不能反映这类破坏的特点。 本文将弹塑性断裂力学中的J积分概念用于滞后破坏的研究,提出用带预制疲劳裂纹的悬臂弯曲试样测定J积分的临界值J_(Ic)和应力腐蚀开裂阈值J_(Iscc)的方法。测定了40CrNiMo钢的J_(Ic)值及其在硫化氢水溶液中的J_(Iscc)值。通过和三点弯曲方法测定的J_(Ic)值的对比,以及和满足线弹性条件时直接测定的应力强度因子K_I值的对比,说明这种方法的可靠性。最后,对悬臂弯曲方法的特点进行了讨论。
关键词:
