K. Mii (Sumitomo Metal Industries
,
Ltd.
,
1-t-3 Otemachi
,
Tokyo 100
,
Japan)M Amano (National Research Institute for Metals
,
1-2-1 Sengen
,
Tsukuba 305
,
Japan)
金属学报(英文版)
The R & D of hydrogen absorbing alloys in Japan started in the early 1970s.Many alloys such as TiMm1.5 based alloys, Fe-Ti-O alloys (e.g. FeTi1.15 O0.024) andthe(mischmetal)Ni5 based alloys (e.g. MmNi4.5 Cr0.46 Mn0.04) were developed by the early 1980s. The application of these alloys to hydrogen storage, heat storage, heat pump, hydrogen purification and motor vehicles has been tried in many iaboratories,and the various techniques for using hydrogen absorbing alloys have been developed.The standarkization of evaluation methods for hydrogen absorbing alloys has been promoted by the Ministry of International Trade and Industry (MITI), and four of them were established as Japanese Industrial Standard (JIS).Alloys for Ni-Metal Hydride batteries have been extensively investigated since 1987in Japun. Mm-Ni-Co-Al-Mn alloys (e.g. MmNi3.55 Co0.75Al0.9Mn0.4) have been devel-oped and commereialized since 1990. The amount of production of small-size Ni-MH batteries in 1995 was about three hundred milliion in number and about one hundred billion yen. The R & D for higher enerpy-density Ni-MH batteries is intensively in progress.MITI and STA (Science and Technology Agency) have promoted the R & D of hydro-gen absorbing alloys in Japan by carrying out the national projects such as Sunshine Program (MITI: 1974-1993) and Utilization of Wind Engeray (STA 1980-1985). The New Sunshine Program (MITI 1993-2020) have started in 1993. This program con-tains the application of hydrogen absorbing alloys to Economical- Enerpy- City System and to We-NET (International Clean Energy System of Technology Utilizing Hydro-gen: World Energy Network.
关键词:
hydrogen absorbing alloy
,
null
,
null
,
null
Hiroshi Takechi Nippon Steel Corporation
,
Japan.
材料科学技术（英文）
This paper reviews recent developments in the contin- uous processing of steels in Japan.The following items are discussed:continuous casting-direct rolling(CC-DR) process of hot-rolled strip:thermomechanical control process(TMCP)of heavy plates:in—line heat treating pro- cess of rails:direct lead patenting(DLP)process of wire rods;and fully integrated processing line(FIPL)of cold-rolled strip.
关键词:
continuous casting
,
null
,
null
,
null
Z.L.Wang
材料科学技术（英文）
Property characterization of nanomaterials is challenged by the small size of the structure because of the difficulties in manipulation. Here we demonstrate a novel approach that allows a direct measurement of the mechanical properties of individual nanotube-like structures by in-situ transmission electron microscopy (TEM). The technique is powerful in a way that it can directly correlate the atomic-scale microstructure of the carbon nanotube with its physical properties, providing a one-to-one correspondence in structure-property characterization. Applications of the technique will be demonstrated on mechanical properties, the electron field emission and the ballistic quantum conductance in individual nanotubes.
关键词:
詹茂盛
,
方义
,
王瑛
,
范荣峥
航空材料学报
doi:10.3969/j.issn.1005-5053.2000.04.010
在40℃和80℃环境中,分别对Bayer-PC、Japan-PC、Korea-PC三种聚碳酸酯缺口冲击试样进行了热空气老化和热水老化实验研究.在0～400h老化时间内,研究了这三种PC的热空气老化和热水老化对冲击强度和断面形貌的影响,讨论了PC热空气老化和热水老化机理.结果表明:老化前,Japan-PC、Korea-PC和Bayer-PC冲击强度分别为95kJ/m2、83 kJ/m2和55 kJ/m2;在40℃和80℃热空气老化后,三种PC冲击强度均有所下降,其中80℃热空气老化引起的降幅最大,热空气老化400h后的冲击强度顺序为Japan-PC>Korea-PC>Bayer-PC,在40℃热水老化后,三种PC的冲击强度几乎不受老化时间影响;在80℃热水老化后,三种PC冲击强度均有所下降,其中Bayer-PC降幅最小,Japan-PC次之,Korea-PC最大,但PC的平衡冲击强度大小与热空气老化的情况相同.由扫描电镜对冲击断面形貌观察可知,未老化的三种PC均以剪切屈服破坏机理为主,老化后的三种PC主要以银纹集中破坏机理为主.
关键词:
聚碳酸酯
,
热空气老化
,
热水老化
,
破坏形貌
J.X Luo and Y.X. Tan (State Key Lab. for Mechanical Behavior of Materials Xi′an Jiaotong University
,
Xi'an 710049
,
China Manuscript received 29 September 1995)
金属学报(英文版)
The relationships between fatigue threshold △Kth and the initial yield .strength σ0 of normalized 1035 steel after various prestrain (at fist, second and third hardening stages respectively) were investigated through the analysis of theσ-εcurves and transmission electron microscope (TEM). After prestraining at first or second hardening stage, there is a marked drop in the values of △Kth and σ0. This is in correspondence with the depinning of the solute atoms from the dislocation lines in the Cottrell atmosphere.At the third hardening stage of prestrain the fatigue threshold increases rapidly and △Kth is even 1.6 times as large as the original value. This is because at this stage no dislocation-cell free areas can be found and the refinement of the dislocation cells occurs with the increase in the prestrain level.
关键词:
:deformation hardening
,
null
,
null
,
null
,
null
D.Watanabe
金属学报(英文版)
Cost reduction in electric power generation is a major management concern, and it is therefore necessary to reduce maintenance expenses while upholding plant reliability. A maintenance optimization system "FREEDOM", which uses RBM technique, DCF (discounted cash flow) and NPV (net present value) calculation functions, has been newly developed. This system probabilistically evaluates the lifetime of boiler and turbine and quantitatively calculates the risk defined as the cumulative probability of failure multiplied by the consequence of failure. Economically optimized timing of inspection and alternative countermeasure such as repair and replacement are then recommended. This system has already been applied to seven plants in Japan, and its effectiveness has been confirmed.
关键词:
plant asset management
,
null
,
null
