F.H. Cao
,
L. Guo
,
L.J. Zhang
,
Z. Zhang
,
J.Q. Zhang
金属学报(英文版)
The corrosion behavior of two different aged LY12 alloys in EXCO (234g/L NaCl, 50g/L KNO3, 0.1M HNO3) and MIL-H-600 (35g/L NaCl, 5g/L (NH4)2SO4) solutions were studied using electrochemical impedance spectroscopy (EIS) in conjunction with SEM technique respectively, and the pH variation of the above accelerated corrosion solution during materials corroding was also measured to characterize the corrosion processes. At the beginning of corrosion, EIS plots exhibited two capacitive arcs in the high frequency range (Cdl) and mediate frequency range (Clf) originating from the original corroded surface and the newly formed interface respectively, and a low frequency inductive loop due to the relaxation phenomenon of reaction intermediates. In the EXCO solution, the EIS results showed that once the exfoliation corrosion occurred, the inductive loop disappeared. The results also showed that the exfoliation corrosion susceptibility of state T6 is much higher than that of state T3, but the intergranular corrosion susceptibility has a reverse order. Based on the relationship of EIS results with SEM and metalloscopy morphologies of the corroding substrates and physic-chemical meaning of EIS parameters, an index (Clf / Cdl) has been proposed to characterize the extent of the localized corrosion, which variation tallies with the real corrosion extent correctly. Meanwhile, good agreement was found between the experimental results and the electrochemical model proposed and, good coherence between the electrochemical features and the distribution type of constituent particles of corroding material was observed.
关键词:
electrochemical impedance spectroscope
,
null
,
null
Z.B. Shao
,
L.J. Zhang
,
Y. Wang
金属学报(英文版)
Peroviskite-type La1_xSrxMnO3 (0≤x≤0.3) was prepared through the solgel process at low temperature (1100℃). The ethylene glycol and citric acid were used to make a sol-gel from an aqueous solution of lanthanum strontium and manganese nitrates. The particle-diameter distribution of powders is from 10 to 50nm, the mean particle size is about 35nm and the specific surface area is about 92.5 to 98.5m2 g-1. Peroviskitetype La1_xSrxMnO3 was synthesized at 1100℃, and the electronic conductivity of La1-xSrxMnO3 is 104-105S.m-1 from room temperature to 1000℃.
关键词:
sol-gel
,
null
,
null
,
null
Journal of Materials Research
The morphology of the dark and bright regions observed by transmission electron microscopy for the Zr(64.13)Cu(15.75)Ni(10.12)Al(10) bulk metallic glass strongly depends on the ion beam parameters used for ion milling. This indicates that the ion beam could introduce surface fluctuation to metallic glasses during ion milling.
关键词:
room-temperature
Physical Review B
The Hamiltonian for a four-sublattice Heisenberg ferrimagnet or ferromagnet with different exchange constants (J(ab) = J(cd) not equal J(bc) = J(da)) was established. An extended Bogoliubov transformation was developed by solving an equation group, consisting of 20 equations and 20 unknowns. The procedure for solving the equation group was carried out by introducing a simple way of reducing the numbers of the equations and the unknowns. The spin-wave spectra in the present system have been determined by performing the standard Holstein-Primakoff transformation and the Bogoliubov one. It has been found that the spin-wave spectra of the present system depend on the exchange constants and that the degeneracy of the spin-wave spectra remains. The results for a special case (J(ab) = J(bc)) i.e., an antiferromagnet are discussed briefly. The spin-wave spectra of the four-sublattice Heisenberg antiferromagnet are found to be degenerative also and they are linear in k for small k.
关键词:
model
Doris Smith
,
Ken Lynam
环境化学
本文中使用安捷伦SPEC C18AR固相萃取膜盘成功萃取了水中的有机氯农药残留和除草剂.使用双柱配置的GC/μECD系统进行检测,安捷伦J&W DB-35ms UI超高惰性色谱柱作为分析柱,DB-XLB色谱柱为确认柱.该方法为浓度接近或低于最大污染限值的含氯有机物提供了高度灵敏的分析方法.根据预估的分析物萃取浓度,方法使用的校准范围为1-100 ng· mL-1.分别对0.01 μg·L-1的加标水样和一个自来水水样进行了萃取和分析,结果证明可满足水中的有机氯农药残留和除草剂的测定.
关键词:
有机氯农药
,
除草剂
,
色谱柱
Y.G. Cao
,
X.Y. Sun
金属学报(英文版)
J-integral and crack opening displacement δ(COD) were important parameters for characterization of fractures in engineering materials. The relationship between J-integral and COD has been investigated for a long time and was enerally represented as J = m σyδ, where σy is the yield strength and m is a function of specimen geometry and material properties. To determine the value of m, extensive studies and experiments have been performed. The method that used the fracture-surface topography analysis (FRASTA) for determining J-integral from fracture surfaces of materials was introduced. On the basis of the relationship between COD and fracture surface average profile, the relationship between J-integral and COD was deduced and compared with the generally used equation. The method was experimentally confirmed to be able to provide a new way to determine the relationship between J-integral and COD.
关键词:
FRASTA
,
null
,
null
null
,
null
金属学报
在工程上,经常由于应力腐蚀开裂和氢脆引起中强度钢结构件发生滞后破坏。这类脆断往往从结构件中预先存在的疲劳或焊接裂纹处开始,因此,运用传统的光滑试样的检验方法不能反映这类破坏的特点。 本文将弹塑性断裂力学中的J积分概念用于滞后破坏的研究,提出用带预制疲劳裂纹的悬臂弯曲试样测定J积分的临界值J_(Ic)和应力腐蚀开裂阈值J_(Iscc)的方法。测定了40CrNiMo钢的J_(Ic)值及其在硫化氢水溶液中的J_(Iscc)值。通过和三点弯曲方法测定的J_(Ic)值的对比,以及和满足线弹性条件时直接测定的应力强度因子K_I值的对比,说明这种方法的可靠性。最后,对悬臂弯曲方法的特点进行了讨论。
关键词:
