X.F. Liu
,
X.F. Bian
,
X.G. Qi
,
M. Thompson and J.J Ma (Colledge of Materials Science and Engineering
,
Shandong University of Technology
,
Jinan 250061
,
China)
金属学报(英文版)
Nucleation sites of α-Al grains after addition of an Al-Ti-B master alloy into pure aluminium have been investigated using EPMA. The results show that either TiAl3 or boride particales can nucleate α-Al grains. But the number of TiAl3 nucleants is reduced with the holding time prolonged and the boride-nuclei are increasing gradually. Based on these results, a new refining method, adding molten Al-Ti-B into commercially pure aluminium, which has a quicker and better refining efficiency is presented.
关键词:
Al-Ti-B master alloy
,
null
,
null
,
null
Y.G. Cao
,
X.Y. Sun
金属学报(英文版)
J-integral and crack opening displacement δ(COD) were important parameters for characterization of fractures in engineering materials. The relationship between J-integral and COD has been investigated for a long time and was enerally represented as J = m σyδ, where σy is the yield strength and m is a function of specimen geometry and material properties. To determine the value of m, extensive studies and experiments have been performed. The method that used the fracture-surface topography analysis (FRASTA) for determining J-integral from fracture surfaces of materials was introduced. On the basis of the relationship between COD and fracture surface average profile, the relationship between J-integral and COD was deduced and compared with the generally used equation. The method was experimentally confirmed to be able to provide a new way to determine the relationship between J-integral and COD.
关键词:
FRASTA
,
null
,
null
孙银洁
,
胡胜泊
,
李秀涛
宇航材料工艺
doi:10.3969/j.issn.1007-2330.2010.02.027
利用SEM、TEM、XPS、XRD、Raman和元素分析仪分析了M40J和T300的表面化学、物理及微观结构特征.研究发现:M40J含碳量高于T300纤维,而含氮量低于T300纤维,且表面活性基团比T300纤维低;M40J和T300碳纤维表面具有大量沟槽,前者相对长而浅,后者相对短而深;T300纤维端面皮芯结构明显,而M40J端面结构较均匀;M40J的微晶结构及取向性优于T300碳纤维.
关键词:
M40J碳纤维
,
微观结构
,
化学特征
,
物理特征
韩建平
,
秦滢杰
,
高伟
,
刘新东
宇航材料工艺
doi:10.3969/j.issn.1007-2330.2014.05.010
针对卫星构件的不同需求,开发了一种芳香胺固化的环氧树脂BA204.研究了无溶剂及溶剂法成型的M40J/BA204复合材料力学、真空放气性能和管件在模拟温度交变条件下的性能变化情况.结果表明:两种方法制备的复合材料力学性能均能满足卫星构件要求,无溶剂法制备的复合材料力学性能优于溶剂法.采用无溶剂法制备的M40J/BA204复合材料其真空质损率为0.23％,可收集挥发性凝聚物为0.009％;复合材料管件经200次热循环冲击后力学性能变化不大,表明M40J/BA204复合材料具有良好的热稳定性.
关键词:
卫星构件
,
M40J/BA204复合材料
,
纤维缠绕
,
无溶剂法
惠雪梅
,
王晓洁
,
尤丽虹
,
王益
,
全小平
宇航材料工艺
doi:10.3969/j.issn.1007-2330.2006.z1.011
通过地面环境模拟实验,分析了高模碳纤维/环氧树脂改性氰酸酯复合材料(M40J/CE/EP)的表面元素,研究了高真空加热环境下复合材料的真空出气性能和出气气体成分.结果表明,M40J/CE/EP复合材料的表面主要由C、O、N元素构成;经高真空加热后,复合材料的出气气体成分以小分子挥发物和碳氢化合物电离碎片为主,有可能在空间低温条件下冷凝在航天器的敏感器件表面而造成污染;通过真空出气性能实验测得,M40J/CE/EP复合材料的总质量损失(TML)的平均值为0.27%,收集到的可凝挥发物(CVCM)为0,完全达到出气筛选合格的指标要求.
关键词:
氰酸酯树脂
,
复合材料
,
出气
,
X射线光电子能谱
Andrej Atrens
材料科学技术（英文）
Corrosion research by Atrens and co-workers has made significant contributions to the understanding of the service performance of engineering materials. This includes: (1) elucidated corrosion mechanisms of Mg alloys, stainless steels and Cu alloys, (2) developed an improved understanding of passivity in stainless steels and binary alloys such as Fe-Cr, Ni-Cr, Co-Cr, Fe-Ti, and Fe-Si, (3) developed an improved understanding of the melt spinning of Cu alloys, and (4) elucidated mechanisms of environment assisted fracture (EAF) of steels and Zr alloys. This paper summarises contributions in the following: (1) intergranular stress corrosion cracking of pipeline steels, (2) atmospheric corrosion and patination of Cu, (3) corrosion of Mg alloys, and (4) transgranular stress corrosion cracking of rock bolts.
关键词:
Stress corrosion cracking
,
null
,
null
LIU Guoquan Department of Materials Science and Engineering
,
University of Science and Technology Beijing
,
100083
,
China.
材料科学技术（英文）
Quantitative analysis of populations having a geometric structure,which has developed into a special scientific subject called microstructology or stereology,is of great importance to the characterization and evaluation of microstructures and their evolution in various processes.This paper, besides a brief discussion on those topics such as the recent developments of computer assisted image analysis,mathematical morphology,and fractal analysis,will mainly focus on the scope,fundamen- tals,present status,and perspectives of classical stereology.Several case examples of its application to materials science will also be given.
关键词:
stereology
,
null
,
null
,
null
宁波
,
赵宇
,
李波
钢铁研究学报
磁温补偿合金1J30经深低温处理后合金中的部分奥氏体转变为马氏体,致使合金的磁温补偿能力下降.通过调整镍含量,同时添加铬,得到了新型磁温补偿合金1J30M.这种新型磁温补偿合金既具有1J30合金的磁温补偿能力,又具有1J32合金的耐深低温能力.
关键词:
磁温补偿合金
,
深低温
,
马氏体相变
