欢迎登录材料期刊网

材料期刊网

高级检索

  • 论文(10026)
  • 图书()
  • 专利()
  • 新闻()

Microstructure and electrochemical characteristics of advanced composite Zr-based hydrogen storage alloy

Mingfen WEN , Lian CHEN , Min TONG , Demin CHEN , Huiming CHENG , Yuchun ZHAI , Yanwen TIAN

材料科学技术(英文)

Zr0.9Ti0.1(Ni,Co,Mn,V)(2.1) as-cast alloy was prepared by melting under Ar atmosphere; and then, four composite alloys were prepared by ball-milling after hydrogen absorbing agent was added. The initial discharge capacity was as high as 430 mAh .g(-1) for composite alloy electrode c discharged at 60 mA .g(-1) current density and its maximum capacity reached 505 mAh .g(-1). All composite alloy electrodes have good activation behavior, being fully activated in one or two cycles. At 300 mA .g(-1) current density, the composite alloy electrode c was found to have good cycle stability.

关键词:

THEREVERSSE TRANSFOR MATION OF THE STERSS INDUCEDεMIN FE 17MN 10CR 5SI 4NIALLOY

Q.S. Liu1 , 2 , 3) , L.C. Zhao3) , G.X. Dong2) and N.J. Gu1) 1) Heibei University of Technology , Tianjin 300130 , China 2) Tianjin Institute of Technology , Tianjin 300191 , China 3) Harbin University of Technology , Harbin 150001 , China

金属学报(英文版)

Theconstruction changinginthereversetransformation ofthestress induced εMin Fe 17 Mn 10 Cr 5 Si 4 Ni alloy is carefully inspected in transmission electron microscope, and then stress induced εM procedure of reverse transformation is analyzed. The behavior of reverse transformationisdissimilar when the organization of εMis different. The reversetransfor mation ofεM withtheshapeofsingle plateandstripisrelativelyeasy,anditsreversibilityincrystallographiciseasilytocarryout,fortheεM with multilayerstructure,thereversetrans formationtakes placein isolatedlayers, fortheεMthat grows well,thereversetransforma tion isrelatively difficult becauseofthe ductile harmonization between itsinternalorganiza tion structures.

关键词: stress induced εM , null , null

[C16min]Br修饰的多壁碳纳米管及其与低密度聚乙烯复合材料的制备及介电性能

徐佩 , 卢旭鑫 , 汪传斌 , 杨善中 , 孙晓红 , 丁运生

高分子材料科学与工程

为改善多壁碳纳米管(MWNT)在低密度聚乙烯(LDPE)中的分散性及复合材料的界面特性,采用溴化-1-十六烷基-3-甲基咪唑基离子液体([C16min]Br)对MWNT进行表面改性,并用Raman光谱对改性效果进行了表征.将经过修饰的碳纳米管(MIL)与LDPE熔融共混得到MIL/LDPE复合材料,采用场发射扫描电子显微镜(FESEM)和阻抗分析仪(LCR)对复合材料的结构与介电性能进行了分析.结果表明,相比与MWNT/LDPE(渗流阈值为5.2%,介电常数为82,介电损耗为0.93),MIL/LDPE(渗流阈值为9.1%,介电常数为169,介电损耗为0.51)介电常数增大,介电损耗降低.并且在低温时,MIL/LDPE介电常数随温度的变化甚小,显示出良好的温度-介电常数特性.

关键词: 咪唑基离子液体 , 碳纳米管 , 低密度聚乙烯 , 介电性能

强制对流作用下多晶粒生长的相场模拟

袁训锋 , 丁雨田

材料导报

采用Tong和Beckermann等提出的耦合流场相场模型对纯镍凝固中多晶粒枝晶的生长过程进行模拟,研究了多晶粒枝晶的生长形貌和温度分布.结果表明,熔体流动显著改变凝固前沿的传热,从而影响枝晶生长.受熔体流动和多晶粒之间相互影响的共同作用,枝晶在4个最优生长方向上的形貌呈现不对称;熔体流动还改变了枝晶的水平最优生长方向,使得水平主枝向上游倾斜;此外,二次枝晶出现径向熔化和轴向熔化等粗化方式.

关键词: 相场法 , 强制对流 , 多晶粒 , 凝固

STUDY ON THE THREESTAGE CREEP OF THE DD3SINGLE CRYSTAL SUPERALLOY

Author X.A. Zhang1) , H.Q. Xia1) , Z.T. Wu1) , Y.F. Han1) , R. Shi2) and G.X. Hu2) \= 1) Mechanical Properties Laboratory , Beijing Institute of Aeronautical Materials , Beijing 100095 , China2) The State Education Commission Open Research Laboratory for High Temperature

金属学报(英文版)

Materials and Testing, Shanghai Jiao Tong University, Shanghai 200030, ChinaManuscript received 18 October 1998 The threestage creep behavior of DD3 single crystal superalloy had been studied. The results show that the creeprupture properties of DD3 single crystal satisfy the requirements for high performance turbine blade application. The influence of crystal orientation on the creeprupture property of DD3 single crystal was tested and discussed. An engineering criterion to evaluate the regimes of secondary and tertiary creep is proposed, and this method gives a reasonable result for practical applications. The fractography and TEM micrography of the tested specimens had been studied, and it is determined that the glidecontrolled creep is the basic creep mechanism of DD3 single crystal at intermediate temperature, but the thermally activated processes become dominant at higher temperature.

关键词: threestage creep curve , null , null , null

Crystallographic Tailoring of Graphene by Nonmetal SiO(x) Nanoparticles

Journal of the American Chemical Society

In this communication, we demonstrate nonmetal SiO(x) nanoparticles (NPs) can tailor few-layer graphenes (FLGs) into graphene nanoribbons (GNRs) and regular pieces with smooth edges. The tailoring of graphene is realized by the movements of SiO(x) NPs along the graphene lattice in the atmosphere of H(2), and the tailored trenches exhibit high selectivity of the crystallographic orientation compared to the reported metal. NPs. The low tailoring rate and the tong lifetime provide great potential for accurate control of the trench length or the length of the tailored GNRs. As a result, smooth GNRs with a length of several micrometers and a width narrower than 10 nm are obtained. A catalytic hydrogenation mechanism is proposed for the tailoring of graphene by SiO(x) NPs. These findings open up the possibility for atomically precise graphene device fabrication without metal, contamination and indicate the potential catalytic activity of nonmetal Nips for the hydrogenation of carbon materials.

关键词: nanoribbons;hydrogenation;graphite

桐马环氧玻璃丝粉云母绝缘材料的耐盐雾湿热老化特性

付强 , 孔繁荣 , 陈庆国

复合材料学报

为了研究海洋能电机主绝缘材料耐盐雾湿热老化能力,对电机多胶模压(Resin Rich Molding,RRM)桐马环氧玻璃丝粉云母(Tong ma Epoxy Glass Fiber Power Mica,TEGM)绝缘材料进行模拟海洋气候的盐雾湿热老化试验,测试了不同老化周期下材料的吸水率变化,并结合扫描电子显微镜(Scanning Electron Microscope,SEM)的观测结果分析了材料老化前后微观形貌的变化.利用宽频介电阻抗谱仪测试不同老化周期和不同测试温度下的TEGM绝缘材料的频域介电参数变化,并运用电介质极化理论分析老化前后的微观结构形态变化和宏观介电性能之间的关系.研究结果表明,TEGM绝缘试样老化过程中的吸水性呈现快速吸湿、缓慢吸湿和饱和吸湿3个阶段;随着老化时间的延长,材料相对介电常数和介质损耗因数呈上升趋势,利用频域介电谱(Frequency Domain Spectroscopy,FDS)曲线可较好反映绝缘材料的老化状态;通过对测试数据的拟合,得到老化绝缘材料的介电参数与材料吸水率在低频下存在的二次方程关系.

关键词: 盐雾湿热老化 , 频域介电谱 , 多胶模压 , 桐马环氧玻璃丝粉云母 , 绝缘材料 , 老化 , 吸水率

尼龙612的等温结晶动力学

王玉东 , 付鹏 , 李晓光 , 刘民英 , 赵清香

高分子材料科学与工程

用差示扫描量热(DSC)研究了尼龙612的等温结晶动力学.实验结果表明,在所研究的等温结晶温度范围内(184℃、186℃、188℃、190℃、192℃),尼龙612达到最大结晶速率时的时间、半结晶期和动力学结晶速率常数分别为:O.12min、0.19 min、0.22 min、0.29 min、0.59 min;0.15 min、0.22 min、0.24 min、0.33 min、0.64 min和22.03 min<'-1>、23.28min<'-1>、8.85 min<'-1>、5.15 min<'-1>、1.93 min<'-1>.等温结晶过程符合Avrmi方程,二次结晶现象不明显.在等温结晶过程中得到的Avrmi指数n在1.81~2.32之间,由理论分析可知,尼龙612等温结晶是一维生长和二维盘状生长.由Arrhenius方程求得尼龙612的等温结晶活化能ΔE=-209.5 kJ/mol.

关键词: 尼龙612 , 等温结晶动力学 , 结晶活化能

在不同时间下退火对非晶硅薄膜晶化的影响

靳瑞敏 , 陈兰莉 , 罗鹏辉 , 郭新峰 , 卢景霄

材料导报

用玻璃作衬底在不同温度下用PECVD法直接沉积非晶硅(a-Si∶H)薄膜,在400℃和500℃分别光退火5min、10min、20min、30min、40min、60min、120min,用拉曼光谱分析前后样品,发现随着晶化时间的延长晶化效果越好,500℃退火的薄膜比400℃的晶化效果好.

关键词: PECVD法 , 非晶硅薄膜 , 光退火晶化 , 拉曼光谱

  • 首页
  • 上一页
  • 1
  • 2
  • 3
  • 4
  • 5
  • 下一页
  • 末页
  • 共1003页
  • 跳转 Go

出版年份

刊物分类

相关作者

相关热词