Y.Tsunekawa
,
S.Tamura
,
M.Okumiya
,
N.Ishihara
材料科学技术（英文）
Hot-dip coating has been practically employed in manufacturing zinc alloy coated steel sheets. However, it is difficult to coat aluminum alloy on a bulky steel substrate without sufficient preheating, because a rapidly solidified layer containing gas babbles is formed on a substrate surface. A variety of iron-aluminides are also formed at the interface of a steel and aluminum hot-dip coating system, which is the main difficulty in joining of steel with aluminum. Ultrasonic vibration was applied to a steel substrate during hot-dip coating of aluminum alloy to control a rapidly solidified layer and a brittle reaction layer. Hot dipping of columnar steel substrates into molten aluminum alloy (Al-2.7 mass fraction Si-4.6 mass fraction Sn) was carried out through the use of a Langevin oscillator with resonant frequency of 19.5 kHz. The application of ultrasonic vibration is quite effective to control a rapidly solidified layer and a surface oxide layer from a substrate surface by the sonocapillary effect based on a cavitation phenomenon, so that the intimate contact is achieved at the beginning of hot-dip coating. The application of ultrasonic vibration to hot-dipping is effective to control a reaction layer with less than 5 μm in thickness. An impact test exhibits that the good adhesive strength is approved in hot-dipped aluminum coatings with a thin reaction layer of approximately 5 μm.
关键词:
Ultrasonic vibration
,
null
,
null
,
null
Y.B. Hou
金属学报(英文版)
In this paper, the PMMA films doped with N,N'-diphenyl-N,N'-di(m-tolyl)-benzidineand rubrene were fabricated by spin coating, and the effect of photooxidation onthe photoluminescence of the doped PMMA thin films was investigated. The resultsshowed that under the irradiation of 350nm UV light, N,N'-diphenyl-N,N'-di(m-tolyl)-benzidine can sensitized rubrene and results in the enhancement in the photooxrationof rubrene. The effect of photooxidation on the photoluminescence from rubrene w asmore obvious. Both lifetime measurement and in situ measurement of photolumines-cence showed that rubrene molecules exist in two chemical surroundings.
关键词:
photoluminescence
,
null
Ceramics International
The dispersion behavior of Si3N4 nanopowders prepared by laser-induced gas-phase reaction in a non-aqueous solvent, N-N-dimethylformamide (DNIF) was studied, and triethanolamine (TEA) was selected as a dispersant. One hundred and sixty-six-day sedimentation tests were used to study the stability of the suspensions. Photon correlation spectroscopy was employed to measure the sizes of aggregates and coagulation rates. TEA was proved an effective dispersant for nano-Si3N4 in DMF, presoaking treatment could enhance the effect of the dispersant. TEA 1.0 wt.% referred to Si3N4 and a 1-month-presoaking gave the best dispersion, the dispersion stability was improved from several minutes to several months, and the average size of the aggregates was reduced to about a twenty-fifth. The dispersion ability of TEA was believed being related to its strong affinities both to the powder surface and to the solvent. (C) 2002 Elsevier Science Ltd and Techna S.r.l. All rights reserved.
关键词:
Si3N4;dispersion;nanopowders;N-N-dimethylformamide;triethanolamine;composite;powders
Journal of Magnetism and Magnetic Materials
We present first-principles study on the magnetic properties of the 3D metal-ligand coordination polymer [Cu(mal)(DMF)]n within the framework of density functional theory ( DFT) by using the full-potential linearized augmented plane-wave (FP-LAPW) method. The total and partial density of states ( DOS), the band structure, and the atomic spin magnetic moment of [ Cu( mal)( DMF)] n are calculated. The calculation reveals that [ Cu( mal)( DMF)] n is a ferromagnetic semiconductor. The calculated spin magnetic moment is about 1.000 mu B per molecule, which is in agreement with experimental value. (c) 2007 Elsevier B.V. All rights reserved.
关键词:
first-principles;electronic structure;ferromagnetic properties;complexes;acid
柴生勇
,
安忠维
液晶与显示
doi:10.3969/j.issn.1007-2780.2001.02.007
通过Ulmann缩合反应合成了在有机电致发光（OEL）显示器件上有使用前景的四苯基联苯二胺类空穴传输材料N， N′-二苯基-N， N′-双(3-甲基苯基)-［1， 1′-联苯］-4， 4′-二胺、 N， N′-二苯基-N， N′-双(4-甲基苯基)-［1， 1′-联苯］-4， 4′-二胺和N， N， N′， N′-四苯基-［1， 1′-联苯］-4， 4′-二胺。 对产品从混合物中分离的方法作了改进。 其产率及含量分别为85%、 97.6%； 95%、 98.5%； 70 %、 98.1% 。 对3种化合物均用红外光谱进行了表征。
关键词:
制备
,
四苯基二胺化合物
,
空穴传输材料
,
有机电致发光
沈颖旎
,
罗智伟
,
严新焕
催化学报
以硝基苯为原料, Pt/γ-Al2O3为催化剂,乙醇水溶液为溶剂和氢供体,采用原位液相加氢一步法合成了N-乙基苯胺和N,N-二乙基苯胺. 采用低温N2吸附-脱附、电感耦合等离子体发射光谱、X射线衍射、程序升温化学吸附和透射电子显微镜等对Pt/γ-Al2O3催化剂进行了表征,并考察了所制备催化剂的原位液相加氢性能. 结果表明,在温度为503 K、压力为5.0 MPa、空速为3.2 h-1、溶剂水含量为30%以及硝基苯浓度为8%的反应条件下,在Pt/γ-Al2O3催化剂上原位液相加氢合成N-乙基苯胺及N,N-二乙基苯胺有较好的结果,硝基苯转化率达到100%, N-乙基苯胺和N,N-二乙基苯胺的总收率达到99.5%. 讨论了硝基苯原位液相加氢合成N-乙基苯胺和N,N-二乙基苯胺的反应机理.
关键词:
铂
,
氧化铝
,
硝基苯
,
原位液相催化加氢
,
N-乙基苯胺
,
N
,
N-二乙基苯胺
,
乙醇
Journal of Applied Physics
Amorphous BC2N powders were prepared by mechanical milling with hexagonal boron nitride and graphite as starting materials. A bulk amorphous BC2N compound was produced by sintering the as-milled amorphous BC2N powders in a vacuum of 10(-5) Torr at a temperature of 1470 K. The conductivity measurement for the bulk amorphous BC2N compound showed that it behaves as a semiconductor with band gap energy of 0.11 eV for temperatures ranging from room temperature to 560 K and a semimetal for temperatures between 560 and 740 K. The mechanism of the formation of the amorphous BC2N powders is discussed. (C) 1998 American Institute of Physics.
关键词:
bc2n
