XU Qiang
,
LEI Changhui (BeiJing Laboratory of Electron Microscopy. Chinese Academy of Sciences
,
P. O. Box 2724.100080 )Beijing
,
China.ZHANG Yonggang (Department of Materials Science and Engineering
,
BeiJing University of Aeronautics and Astronautics
,
100083 Beijing
,
China.)
金属学报(英文版)
A Ti-45at.%Al alloy which was solution-treated at 1350℃ for 30 minutes and quenched in water is employed to explore mechanisms of α_2→γphase transformation. The ageing process of the quenched alloy has been in situ studied it has been found that the γ lamellae can precipitate in the α_2 matrix by two mechanisms. When The alloy is aged at 700℃, the stacking faults pre-existing in the α_2 matrix start to grow and more are generated.With the increase of ageing time and ageing temperature the density of stacking faults is increased and the γ lamellae then precipitate. This isα diffusion-controlled process. Alternatively, the γ lamellae may be formed from the α_2 matrix by 1/3(1100) shearing on the (0001) plane. The latter mechanism implies that the strain-induced transformation may occur, which is confirmed by deformation of the quenched alloy.
关键词:
: TiAl
,
null
,
null
Solid State Communications
Considering the image potential, we calculate the binding energies of a shallow donor impurity placed on the centre of a quantum box using the variational approach. The results we have obtained show that there is a great difference of the effects of image potential between the cases including impurity ion image potential and including the image potentials of impurity ion and electron simultaneously. The results also show that the image potential is important, especially when the dimensions of quantum box become small.
关键词:
well;gaas-ga1-xalxas;states
王雪俊
,
夏海平
材料导报
制备了χNb2O5-(10-χ)La2O3-60P2O5-10Na2O-19BaO-Eu2O3(以mol%记χ=9、7、5)的玻璃,测定了玻璃的吸收光谱、发射光谱、激发光谱、声子边带谱和差热分析曲线.从发射光谱出发获得了Eu3+光学跃迁的J-O参数Ω2、Ω4,并计算了Eu3+离子5DO→7FJ(J=1,2,4)的自发辐射跃迁几率A以及受激发射截面σp.结果显示,随着La2O3的增加和Nb2O5的减少,玻璃样品的热稳定性降低,强度参数Ω2减小,表明材料的对称性提高,共价性减弱,Eu-O键强减弱;随着La2O3的增加,电-声子偶合减弱,受激发射截面σp减小.
关键词:
光学材料
,
Eu3+离子掺杂铌镧玻璃
,
光谱性质
,
J-O理论
,
强度参数
,
受激发射截面
L. H. Lang
,
D. C. Kang
,
S. H. Zhang
,
Z. R. Wang
,
S. J. Yuan
,
K. B. Nielsen and J. Dancket 1) Department of Materials Engineering
,
Harbin Institute of Technology
,
Harbin 150001
,
China 2) Aalberg University
,
Denmark
金属学报(英文版)
In this paper, the forming features of tapered rectangular box during hydrodynamic deep drawing are studied by means of FEM.The effect rules of square blank corner corner amount on body wrinkling are recognized and corresponding methods are discussed. At last, the results of FEM are verified by experi- ment.
关键词:
sheet metal forming
,
null
,
null
Qunqiang FU
材料科学技术（英文）
At first, a series of finite element method (FEM) simulation tests were used to find the critical forming conditions of hot-galvanized sheet steel during the rectangular box drawing processing when constant blank holder forces were applied. According the test results, the reasonable alteration scope of initial variable blank holder force (VBHF) was as 1.9~2.3 T. Then, based on the test productions of blank holder force, 12 typical VBHF curves were applied to perform the simulation tests by the simulation software of DYNAFORM. The simulation test results showed that VBHF had great effects on drawing formability of hot-galvanized sheet steel during the rectangular box drawing. However, the different VBHF curves were applied to control the whole drawing and it would get great different effects. At the same tine, the VBHF had great effects on the maximum thick thinning ratio, but had little effect on the maximum thick incrassation ratio. So, reasonable application of the VBHF would greatly decrease the fractures. When the VBHF profile is taken as curve L, the best effect of drawing formability could be obtained. When curve I is used, contrary effect could be gotten. The other types of curves would cause effects between above two types of VBHF curves. Finally, the actual tests were applied to check the validity of the FEM simulation tests. The results show that the FEM simulation tests are good ways for predicting and optimizing the VBHF.
关键词:
Drawing process
,
变压边力
,
热镀锌钢板
Journal of Alloys and Compounds
The subsolidus phase relations in the system La2O3-B2O3-P2O5 were investigated. The system can be divided into 12 three-phase regions. There are nine binary compounds and one ternary compound in this system. The ternary compound La7O6(BO3)(PO4)(2) has a monoclinic structure, space groups P2(1)/n, with lattice constants a = 7.0172 Angstrom, b = 17.9125 Angstrom, c = 12.6500 Angstrom, beta = 97.516 degrees, V = 1576.39 Angstrom(3), and Z = 4.
关键词:
La2O3-B-3-B2O3-P2O5 system;phase relations;ternary compounds
陈玮
,
姚长江
,
尹周澜
,
刘新红
耐火材料
doi:10.3969/j.issn.1001-1935.2008.04.009
分别对反应前后的p-Al2O3进行XRD及SEM分析,确定反应前后Al2O3的物相及显微结构变化;测定加入添加剂前后浆体温度与时间的关系,从而确定添加剂对p-Al2O3水化速度的影响;测定加入添加剂前后浆体的黏度变化,从而测定出添加剂对p-Al2O3水化过程的影响.结果表明:1)p-Al2O3属于无定形态;2)在没有添加剂的情况下,p-Al2O3的水化速率很快,同时释放出大量热量,水化产物主要是一水软铝石、三水铝石和拜耳石;3)加入碳酸钠及六偏磷酸钠的混合物为添加剂后,p-Al2O3的水化速率显著降低,释放出的热量显著降低,水化产物主要是一水软铝石.
关键词:
p - 氧化铝
,
水化硬化
,
不定形耐火材料
,
结合剂
ZHOU Guanghong
,
DING Hongyan
,
ZHOU Fei
,
ZHANG Yue
钢铁研究学报(英文版)
NiPnano Al2O3 composite coatings were deposited by electroless plating, and their microstructures were observed by SEM (scanning electron microscope). The microhardness and the wear resistance of the NiPnano Al2O3 composite coatings were measured using microhardness tester and blockonring tribometer, respectively, and the comparison with those of NiP coatings or NiPmicro Al2O3 coating was given. The influences of aging temperature on their hardness and wear resistance were analyzed. The results showed that the nano Al2O3 particles were distributed uniformly in the NiPAl2O3 coatings. Among three kinds of NiP based coatings, the hardness and wear resistance of NiPnano Al2O3 coatings were largest, and the maximum values could be obtained at 400 ℃. This indicated that the precipitation of nano Al2O3 particles would improve the hardness and wear resistance of the NiP coatings.
关键词:
composite coating;nano Al2O3;aging treatment;mechanical property
