材料期刊网

EFFECTS OF SPECIFIED BLANK SIZE ON BODY WRINKLING DURING HYDRODYNAMIC DEEP DRAWING OF TAPERED RECTANGULAR BOX

L. H. Lang , D. C. Kang , S. H. Zhang , Z. R. Wang , S. J. Yuan , K. B. Nielsen and J. Dancket 1) Department of Materials Engineering , Harbin Institute of Technology , Harbin 150001 , China 2) Aalberg University , Denmark

金属学报(英文版)

In this paper, the forming features of tapered rectangular box during hydrodynamic deep drawing are studied by means of FEM.The effect rules of square blank corner corner amount on body wrinkling are recognized and corresponding methods are discussed. At last, the results of FEM are verified by experi- ment.

关键词: sheet metal forming , null , null

H2S应力腐蚀试验用H2S气通设计

孙耀峰

腐蚀学报（英文） doi:10.3969/j.issn.1002-6495.2001.z1.007

在满足H2S应力腐蚀试验的试验条件下,设计了H2S应力腐蚀实验室中H2S气体的通气装置.设计方案切实易行,安全可靠;实现了出口H2S气体的吸收再利用,减少了对环境的污染.

关键词: H2S气体 , 设计方案 , H2S应力腐蚀试验 , 环境保护

Corrosion behaviour of carbon steel in different concentrations of HCl solutions containing H(2)S at 90 degrees C

Corrosion Science

The corrosion behavior of SAE-1020 carbon steel in H(2)S-containing solutions with different concentration of HCl at 90 degrees C was investigated by weight loss, electrochemical measurements, SEM and XRD analysis. The results showed that the corrosion rate of carbon steel increased with increasing HCl concentration. Uniform corrosion was found on the carbon steel surface in H(2)S + HCl solutions, while corrosion cavities were observed in the solution only containing H(2)S. The ratio of Faradaic process of total corrosion process increased with the increase of HCl concentration. The corrosion products were solely composed of mackinawite in the H(2)S-containing solutions with or without HCl. (c) 2011 Elsevier Ltd. All rights reserved.

关键词: Steel;Weight loss;EIS;SEM;XRD;Acid corrosion;acidic chloride solutions;hydrogen-sulfide;aqueous-solution;iron;sulfides;electrochemical-behavior;media;dissolution;impedance;polarization;environments

Corrosion of Y, Fe and Fe-15Y in H_2-H_2S Mixture under 10~(-3) Pa S_2 at 600～800℃

Yan NIU , Weitao WU and Chaoliu ZENG (State Key Lab. for Corrosion and Protection , Institute of Corrosion and Protection of Metals , Chinese Academy of Sciences , Shenyang 110015 , China)F. Gesmundo and F. Viani (Instituto di Chimica , Facolta di Ingegneria , Un

材料科学技术（英文）

The corrosion of an Fe-based alloy containing 15 wt pct Y in H2-H2S mixtures under 10-3 Pa S2 was studied at 600~800℃ in an attempt to find materials with improved sulphidation resistance with respect to pure Fe. The presence of Y has been shown to be beneflcial, but not sufficient to the level expected. In fact, the alloy is able to form at all tested temperatures an external FeS layer, beneath which a zone containing a mixture of the two sulphides is also present. Thus,Fe can still diffuse through this region to form the outer FeS layer with non-negligible rate. The corrosion rate of Fe is considerably reduced by the Y addition. but the alloy corrodes still much more rapidly than Y. The sulphidation kinetics is generally rather irregular for both the pure metals, while the corrosion rate of the alloy decreases with time and tends to become parabolic after an initial period of 12~17 h. The sulphidation behaviour of the alloys is discussed by taking into account the presence of an intermetallic compound Fe17Y2 and the limited solubility of Y in Fe

关键词:

炼油工业中H_2S的腐蚀

郦建立

腐蚀学报（英文）

综述了含H2 S介质中材料的各种腐蚀形态 ,阐述了H2 S腐蚀发生的机理和影响因素 (外部环境 ,材料条件等 ) .介质温度和浓度对腐蚀有较大的影响 ;腐蚀过程中析出的H是引起SSCC的重要因素 ;硬度、夹杂和带状组织降低材料对H2 S腐蚀开裂的阻力 .

关键词: 硫化物应力腐蚀 , hydrogen induced cracking

Corrosion of Y, Fe and Fe-15Y in H-2-H2S mixture under 10(-3) Pa S-2 at 600 similar to 800 degrees C

材料科学技术（英文）

The corrosion of an Fe-based alloy containing 15 wt pet Y in H-2-H2S mixtures under 10(-3) Pa S-2 was studied at 600 similar to 800 degrees C in an attempt to find materials with improved sulphidation resistance with respect to pure Fe. The presence of Y has been shown to be beneficial, but not sufficient to the level expected. In fact, the alloy is able to form at all tested temperatures an external FeS layer, beneath which a zone containing a mixture of the two sulphides is also present. Thus, Fe can still diffuse through this region to form the outer FeS layer with non-negligible rate. The corrosion rate of Fe is considerably reduced by the Y addition, but the alloy corrodes still much more rapidly than Y. The sulphidation kinetics is generally rather irregular for both the pure metals, while the corrosion rate of the alloy decreases with time and tends to become parabolic after an initial period of 12 similar to 17 h. The sulphidation behaviour of the alloys is discussed by taking into account the presence of an intermetallic compound Fe17Y2 and the limited solubility of Y in Fe.

关键词: high-temperature sulfidation;most-reactive component;ni-nb alloys;h2-h2s mixtures;behavior;600-degrees-c-800-degrees-c;oxidation

H2S分压对油管钢CO2/H2S腐蚀的影响

张清 , 李全安 , 文九巴 , 白真权

腐蚀学报（英文）

1974-），男，硕士研究生，研究方向为腐蚀与防护.〖ZK)〗 Tel：0379-4231846〓E-mail：FQ)〗〖HT〗〖HJ〗〖HT5”SS〗 〖JZ(〗〖HT2H〗〖STHZ〗〖WTHZ〗 采用高温高压釜，辅以失重法和扫描电镜，对不同H2S分压下(1.4 kPa,20 kPa,60 kPa,120 kPa)油管钢N80、P110的CO2/H2S腐蚀进行了研究.结果表明，在试验H2S分压范围内，随着H2S分压的升高，两种钢的腐蚀速率先增后降，且都在H2S分压为20 kPa时取得最大值. 

关键词: H2S分压 , null , null , null

C-S-H 凝胶及其研究方法

杨南如

硅酸盐通报 doi:10.3969/j.issn.1001-1625.2003.02.011

在分析C-S-H凝胶的复杂性和特征的基础上,就测定它的化学组成、C-S-H凝胶中[SiO4]4-四面体的聚合度及其结构的化学和物理的方法作了简要介绍.现代各种测试方法的出现和使用,对C-S-H凝胶的组成和集中[SiO4]4-四面体的聚合结构有了较为完整的概念.

关键词: C-S-H凝胶 , 化学组成 , 凝胶结构 , 测定方法

H2S分压对油管钢CO2/H2S腐蚀的影响

张清 , 李全安 , 文九巴 , 白真权

腐蚀学报（英文） doi:10.3969/j.issn.1002-6495.2004.06.015

采用高温高压釜,辅以失重法和扫描电镜,对不同H2S分压下(1.4 kPa,20 kPa,60 kPa,120kPa)油管钢N80、P110的CO2/H2S腐蚀进行了研究.结果表明,在试验H2S分压范围内,随着H2S分压的升高,两种钢的腐蚀速率先增后降,且都在H2S分压为20 kPa时取得最大值.

关键词: H2S分压 , N80钢 , P110钢 , CO2/H2S腐蚀速率

HCl-H2S-H2O体系中HCl与H2S对20碳钢腐蚀的交互作用

郭金彪 , 李艳

材料保护

目前有关HCl-H2S-H2O体系中HCl与H2S对碳钢腐蚀的交互作用的试验数据较少.利用电化学方法测试了20碳钢在90℃,不同浓度的HCl,H2S单一腐蚀液及HCl和H2S混合腐蚀液中的腐蚀速率,分析了HCl-H2S-H2O体系中HCl与H2S对20碳钢腐蚀的交互作用.结果表明:20碳钢在单一的HCl或H2S腐蚀液中的腐蚀速率随HCl或H2S浓度的增大而增大;在HCl-H2S-H2O体系中,不论H2S浓度高低,HCl的存在均会促进H2S对20碳钢的腐蚀;只有当HCl的浓度较低(≤248.72 mg/L)时,H2S的存在才会促进HCl对20碳钢的腐蚀;而当HCl浓度较高(≥499.16 mg/L)时,H2S的存在不仅不会促进HCl对20碳钢的腐蚀,还会在一定程度上起阻碍作用.

关键词: 20碳钢 , HCl , H2S , 腐蚀 , 交互作用