K.F. Zhang
,
F.X. Diao
,
Q.F. Song
,
W. Wu
,
K.B. Chen and T.Xie Harbin Institute of Technology
,
Harbin 150001
,
China
金属学报(英文版)
This study is concerned with the problems of contact in the process of numerical simulation of sheet metal forming in rigid visco-plastic shell FEM. In respect of analysis of sheet deep drawing process,for the tool model described by triangular elements, a kind of contact judging algorithm about the correlation between the node of deformed mesh and the triangular element of a tool is presented. In SPF/DB Lagrangian multiplier method is adopted to solve the contact problem between deformed meshes, and a new reliable practical dynamic contact checking algorithm is presented. As computation examples, the simulation results of metal sheet deep drawing and SPF/DB are introduced in this paper.
关键词:
kcontact search algorithm
,
null
,
null
,
null
李铂
,
周建江
,
夏伟杰
,
吴连慧
液晶与显示
doi:10.3788/YJYXS20142904.0605
直线是机载座舱显示画面中最基本的图元,其显示质量对于整个画面的显示效果影响较大,尤其是小角度下直线显示的“麻花”现象一直是影响显示效果的关键问题之一.为了提高小角度下直线的显示效果,本文提出了一种基于Wu算法的亮度渐变改进算法.该算法通过渐进地展现直线从轴方向上的亮度变化过程,减少亮度畸变,有效地改进了显示效果.通过Matlab仿真和FPGA实现,验证了该算法反走样后的小角度直线显示效果明显优于其他算法,而且结合中点画线法后,绘制时间与Wu算法相当.同时该算法还可改善大角度直线和圆弧的显示效果,消除了大角度直线的边缘锯齿,解决了圆弧在小角度部分的虚化问题.因此本文算法可用于对实时性和显示效果要求高的机载座舱显示系统,以缓解飞行员的视觉疲劳.
关键词:
座舱显示
,
反走样
,
改进Wu算法
,
小角度
,
FPGA实现
吴连慧
,
周建江
,
夏伟杰
,
陈雅雯
液晶与显示
doi:10.3788/YJYXS20153001.0163
对于光栅化的三角形,其边缘存在明显的锯齿现象,因此需要进行反走样处理.基于Wu直线反走样算法的思想,考虑了水平直线外侧直接添加插值点的算法和三角形三边外侧反走样的算法.综合两者的优点,在绘制光栅化的三角形的同时,边缘叠加Wu反走样直线,并考虑背景像素灰度值的作用.结果表明,改进的三角形光栅化的边缘反走样算法有效提高了三角形光栅化后边缘的显示效果,该算法计算量小,便于FPGA实现,可用于对图形显示质量要求很高的机载显示系统.
关键词:
反走样
,
Wu算法
,
光栅化
,
FPGA
胡跃鑫
,
冯玉林
,
姜伟
应用化学
doi:10.3724/SP.J.1095.2011.00521
采用不同尺寸的碳酸钙粒子增韧高密度聚乙烯,研究了不同温度下共混体系的临界粒子间距与碳酸钙粒子尺寸和含量之间的关系,确定了温度是Wu氏增韧理论临界粒子间判据适用性的重要影响因素.结果表明,在17℃下,临界粒子间距与碳酸钙粒子的尺寸和含量无关,该条件下Wu氏增韧理论临界粒子间距判据是适用的;而随着温度的升高,发现临界粒子间距依赖于碳酸钙粒子的尺寸,表明高温条件下,Wu氏增韧理论临界粒子间距判据不再适用.
关键词:
聚合物增韧
,
粒子间距
,
脆韧转变
于荣
,
贺连龙
,
程志英
,
朱静
,
叶恒强
金属学报
doi:10.3321/j.issn:0412-1961.2002.z1.140
用高空间分辨分析电子显微术研究了TiAl-W-Si合金中B2相的析出行为和元素W的分布.结果表明,α2/γ相界面台阶由于W的富集而成为B2析出相的择尤形核位置.B2相中,高达三分之一的Al原子被W原子置换,而在γ相中只固溶了很有限的W.另外,W也偏析在α2/γ和B2/γ相界面上.这些结果合理地解释了W对提高TiAl合金蠕变性能的显著作用.
关键词:
分析电子显微术
,
TiAl
,
析出相
,
偏析
Journal of Physics D-Applied Physics
The effect of Co addition combined with W on the microstructure and magnetic properties of nanocomposite magnets with composition of (1 - x wt%)Nd8.55Fe84.49W0.60 B-0.636 + x wt% CO, prepared by mechanical alloying, has been investigated. The addition of W can increase the unit cell volume of soft and hard phases in nanocomposite: magnets, and cause the anisotropy field of the hard phase component to increase. Therefore, the addition of W can improve coercivity. On the other hand, addition of Co leads to a decrease of the grain size of the alpha-Fe soft phase component in nanocomposite magnets annealed at temperatures lower than 670 degrees C. It leads further to a decrease of the optimal annealing temperatures, an increase of the remanence and maximum magnetic energy product, and a slight decrease of the coercivity. With increasing the content of Co, the dependence of remanence J(r) on annealing temperature T-a changes from a convex shape, giving a maximum, to a monotonically decreasing one. These phenomena have been explained in terms of the variation of grain growth and exchange coupling between the grains, due to the addition of Co and W.
关键词:
nd-fe-b;remanence enhancement;alloys;phase;microstructure;nb
HUANG Huimin CHEN Xinmin Central South University of Technology
,
Changsha
,
China HUANG Huimin Associate Professor
,
Department of Chemistry
,
Central South University of Technology
,
Changsha
,
China
金属学报(英文版)
The nature of the oxygen contained in β-W was investigated with DSC,X-ray analysis on quenched samples and Auger spectroscope.It was shown that the oxygen contained in nonpyrophoric β-W consists of the reversibly chemisorbed oxygen and the interstitial oxygen which could form an interstitial solid solution with β-W.It seems better to consider β-W to be a metastable phase of tungsten with the interstitial oxygen as stabilizer.
关键词:
tungsten
,
null
,
null
,
null
黄远辉
,
杨海涛
,
尚福亮
,
吴国根
,
汪晓
稀有金属材料与工程
用高温固相反应法制备出A_2W_3O_(12) 型稀土钨酸盐材料(A=Y,Er,Ho,Yb),用室温及高温XRD测定其在不同温度下的结构、晶胞参数及晶胞体积,并用TOPSA软件对其结构进行精修.发现除HO_2W_3O_(12)外,都具有较大的负热膨胀系数.据A. W. Sleight预测,HO_2W_3O_(12)具有较大的负热膨胀特性,但本实验却发现它并没有负热膨胀性,反而具有非常大的正热膨胀系数.
关键词:
稀土钨酸盐
,
高温XRD
,
HO_2W_3O_(12)
韩兵强
,
李楠
材料科学与工程学报
doi:10.3969/j.issn.1673-2812.2003.06.020
以铝热法为基础制备了Al2O3/W复合材料,探讨了Al2O3含量对复合材料合成的影响.研究表明:主要物相为α-Al2O3、金属W.刚玉含量小于0 3时,温度影响不显著,大于0 3时,温度影响显著,有大量碳化物生成,且WC/W2C相对含量随Al2O3含量增加及煅烧温度的提高而增加.当刚玉含量为0 5mol时,有正交晶钨酸铝生成.随刚玉含量变化,金属钨分布从连续分布向弥散分布变化.连续分布的金属钨因被氧化铝包裹因此难以碳化,而弥散分布的金属钨则易于被碳化.
关键词:
铝热反应
,
相组成
,
显微结构
,
碳化