D.S. Liu
,
G.D. Wang
,
X.H. Liu and G.Z. Cui(The State Key Laboratory of Rolling and Automation
,
Northeastern University
,
Shenyang 110006
,
China)
金属学报(英文版)
The influence of prior austenite deformed at different temperature on the subsequent continuous cooling bainitic transformation has been investigated in an C-Ma-Cr-Ni-Mo plastic die steel. The results show that the prior deformation in low temperature region of austenite retards significantly the bainitic transformation. For the same continuous cooling schedule, as austenite deformed at lower temperature, the quantity of the classical sheaf-like bainite becomes less. The present results show that severe deformation leads to mechanical stabilization of austenite and causes the difficulty of bainitic ferrite propagation into the austenite.
关键词:
plastic die steel
,
null
,
null
,
null
,
null
李锋锐
,
顾牡
,
何徽
,
畅里华
,
温伟峰
,
李泽仁
,
陈亮
,
刘金良
,
欧阳晓平
,
刘小林
,
刘波
,
黄世明
,
倪晨
无机材料学报
doi:10.15541/jim20160262
采用溶剂蒸发法生长出透明的带隙宽度为2.96 eV的γ-CuI晶体.在紫外光激发下,该晶体在410、430 nm处分别呈现有近带边发射峰,另在720 nm附近还出现一个与样品碘缺陷有关的宽发射带.经碘退火后,样品720 nm发射带被基本抑制,而在420 nm处出现了一个更强的近带边发射峰.使用扫描相机分别测量了γ-CuI晶体各发射峰(带)的衰减时间谱,其中近带边发射峰的发光衰减时间常数均在数十皮秒量级,表明γ-CuI晶体具有极快的时间响应特性;而720 nm发射带的发光衰减时间常数主要在数十纳秒量级.X射线激发下,γ-CuI晶体具有435 nm近带边发射峰和680 nm发射带,其近带边发射对X射线能量响应的测量结果表明,当Ex＜49.1 keV时,γ-CuI晶体闪烁光快分量对X射线的探测效率相对较高.
关键词:
γ-CuI晶体
,
超快闪烁体
,
衰减时间
,
能量响应
Journal of Materials Science
Solid state amorphizations in mechanically deformed Ni/Ti multilayer composites have been investigated by differential scanning calorimetry and X-ray diffraction. The growth of amorphous alloy in our Ni/Ti composites was facilitated by the large number of grain boundaries and relatively large degree of disorder induced in the metal layers by the cold rolling. The formation of different products of solid-state reaction in the Ni/Ti composites has bee,n elucidated in terms of magnetic and enthalpy analysis. It is thought that the solid state amorphization occurs first during heating, followed by the formation of intermetallic compounds through direct solid-state reaction of elemental nickel and titanium and by the crystallization of the amorphous alloy already formed by the solid state amorphization reaction. The values of the activation energy for interdiffusion and interdiffusion coefficient for the formation of amorphous alloy in the Ni/Ti composites have also been calculated.
关键词:
diffusion couples;interdiffusion reactions;elemental composites;thin-films;ni/zr;ni;planar;binary;growth;alloys
何科林
,
谢君
,
罗杏宜
,
温九青
,
马松
,
李鑫
,
方岳平
,
张向超
催化学报
doi:10.1016/S1872-2067(17)62759-1
光催化技术是目前解决能源和环境问题最具前景的手段之一,因此寻找高效光催化剂已成为光催化技术的研究热点.而在众多半导体催化剂中,廉价、环保且性能稳定的g-C3N4光催化剂在太阳光开发利用方面尤其引人关注.然而,由于g-C3N4的比表面小,活性位点少,以及光生电子/空穴对易复合等不足,严重导致其较低的光催化量子效率.因此,构造Z型体系和负载助催化剂等策略被广泛应用于提高g-C3N4光催化效率.在过去几年中,TiO2,Bi2WO6,WO3,Bi2MoO6,Ag3PO4和ZnO已经被成功证实可以与g-C3N4耦合而构造Z型光催化剂体系.其中,WO3/g-C3N4光催化剂体系,具有可见光活性的WO3导带中的光生电子和g-C3N4价带中的光生空穴容易实现Z型复合,从而保留了WO3的强氧化能力和g-C3N4的高还原能力,最终大幅度提高了整个体系的光催化活性.在g-C3N4的各种产氢助催化剂中,由于常用的Pt,Ag和Au等贵金属的高成本和低储量等问题严重限制了它们的实际应用,所以近年来各种非贵金属助催化剂(包括纳米碳,Ni,NiS,Ni(OH)2,WS2和MoS2等)得到了广泛的关注.我们采取廉价且丰富的Ni(OH)x助催化剂修饰g-C3N4/WO3耦合形成的Z型体系,开发出廉价高效的WO3/g-C3N4/Ni(OH)x三元产氢光催化体系.在该三元体系中,Ni(OH)x和WO3分别用于促进g-C3N4导带上光生电子和价带的光生空穴的分离及利用,从而使得高能的g-C3N4的光生电子在Ni(OH)x富集并应用于光催化产氢,而高能的WO3的光生空穴被应用于氧化牺牲剂三乙醇胺,最终实现了整个体系的高效光催化产氢活性及稳定性.我们通过直接焙烧钨酸铵和硫脲制备出WO3纳米棒/g-C3N4,并采用原位光沉积方法将Ni(OH)x纳米颗粒负载到WO3/g-C3N4上.随后,我们采取X射线衍射(XRD)、高分辨透射电子显微镜(HRTEM)、X射线光电子能谱分析(XPS)和比表面和孔径分布等表征手段来研究光催化剂的结构与形貌;采取紫外-可见漫反射表征方法来研究其光学性能;采取荧光光谱,阻抗和瞬态光电流曲线等表征手段来测试光催化剂的电荷分离性能;采取极化曲线和电子自旋共振谱等表征手段来证明光催化机理;采取光催化分解水产氢的性能测试来研究光催化剂的光催化活性与稳定性.XRD,HRTEM和XPS表征结果,表明WO3为有缺陷的正交晶系的晶体,直径为20–40纳米棒且均匀嵌入在g-C3N4纳米片上;Ni(OH)x为Ni(OH)2与Ni的混合物,其Ni(OH)2与Ni的摩尔比为97.4 : 2.6,Ni(OH)x粒径为20–50 nm且均匀分散在g-C3N4纳米片上,WO3/g-C3N4/Ni(OH)x催化剂界面之间结合牢固,其中WO3和Ni(OH)x均匀分布在g-C3N4上.紫外-可见漫反射表征结果表明,随着缺陷WO3的负载量增加,复合体系的吸收边与g-C3N4相比产生明显的红移,而加入Ni(OH)x助催化剂使得催化剂体系的颜色由黄变黑,明显地增加了可见光的吸收.荧光光谱,阻抗和瞬态光电流曲线结果表明,WO3和Ni(OH)x的加入能有效地促进光生电子/空穴的分离.极化曲线结果表明,掺入WO3和Ni(OH)x能降低g-C3N4的析氢过电位,从而提高光催化剂表面的产氢动力学.?O2?和?OH 电子自旋共振谱表明成功形成了WO3/g-C3N4 耦合Z 型体系.光催化分解水产氢的性能测试表明,20%WO3/g-C3N4/4.8%Ni(OH)x产氢效率最高(576 μmol/(g?h)),分别是g-C3N4/4.8%Ni(OH)x,20%WO3/g-C3N4和纯g-C3N4的5.7,10.8和230倍.上述结果充分证明,Ni(OH)x助催化剂修饰和g-C3N4/WO3 Z型异质结产生了极好的协同效应,最终实现了三元体系的极高的光催化产氢活性.
关键词:
光催化产氢
,
稳定的Ni(OH)x催化剂
,
g-C3N4
,
Z型体系
,
异质结
Communications in Theoretical Physics
By using the theory of pressure-induced shifts and the eigenfunctions at normal and various pressures obtained from the diagonalization of the complete d(3) energy matrix adopting C-3v symmetry, g factors of the ground state of ruby and their pressure-induced shifts have been calculated. The results are in very good agreement with the experimental data. For the precise calculation of properties of the ground state, it is necessary to take into account the effects of all the excited states by the diagonalization of the complete energy matrix.
关键词:
crystal fields;g factors;ruby;high-pressure effects
YU Hailiang
,
LIU Xianghua
,
LI Changsheng
,
Y. Kusaba
钢铁研究学报(英文版)
The behavior of transversal cracks on the surface of the slab corner during vertical and horizontal (VH) rolling process with flat vertical roll and groove vertical roll was simulated by explicit dynamic finite element method. The closure and growth of crack and the contact pressure on surfaces of the crack in contacting zone between slab and roll during rolling process were analyzed. The results showed that during vertical rolling process, when the groove vertical roll is used, the maximum contact pressure on surfaces of the crack is 115 MPa, and the closure of crack is stable; when the flat vertical roll is used, the maximum contact pressure on surfaces of the crack is 70 MPa, and it fluctuates greatly. During horizontal rolling process, when groove vertical roll is used, the contact pressure becomes zero which may accelerate the growth of crack; when flat vertical roll is used, there is still contact pressure. The calculated results are in good agreement with the results of test.
关键词:
slab;crack;VH rolling process;FEM
D.Q.Tang
,
Y. Wang
,
E.Y.Jiang
,
C.Zhao and F.L.Sun Department of Applied Physics
,
Tianjin University
,
Tianjin 300072
,
China
金属学报(英文版)
CN x films were made by a facing targets sputtering ( FTS) systemon the Si(100) substrate under different N 2 partial pressure. XRD, XPS, FTIR and Raman Spectroscopy( RS) were measured to investigate the structure and the binding state of the film. The films are amorphous and the N/C increases with the N 2 partial pressure increasing and reaches 0 46 when the N 2 pressure is 100%. The N incorporated C forms N sp 2C and N sp 3C mainly and there is a small amount of C≡N.
关键词:
LI Quan
,
LIU Zheng-dong
钢铁研究学报(英文版)
An integrated process modelling system for simulating the microstructure evolution of Nb-microalloyed HSLA steel produced in CSP hot rolling process has been developed on the basis of the microstructure simulation and mechanical properties prediction technology. Thermo-mechanical coupled finite element models for simulating hot strip rolling have been developed and the distribution of equivalent plastic strain through the thickness direction in the rolled material of CSP rolling was carried out. Thus the distribution of temperature, strain and strain rate through the thickness of the steel stocks, as well as the microstructure evolution during hot rolling of X60 line pipe steel strip have been investigated by using the developed integrated process modelling system. In addition the determination and optimization of controllable process parameters during CSP hot strip rolling for the Nb-microalloyed X60 line pipe steel have been implemented, and control strategies such as adopting larger pass reduction in the first stand, and arranging appropriate pass interval times and proper rolling speed, to reduce or eliminate mixed-grains microstructure of Nb microalloyed strip in CSP processing have been proposed.
关键词:
CSP;line pipe steel;niobium microalloying;microstructure evolution;mathematical modelling
