Haiwu ZHENG
,
Junjie ZHU
,
Zhuxi FU
,
Bixia LIN
,
Xiaoguang LI
材料科学技术（英文）
3C-SiC films have been deposited on Si (111) substrates by the low-pressure vertical chemical vapor deposition (LPVCVD) with gas mixtures of SiH4, C3H8 and H2. The growth mechanism of SiC films can be obtained through the observations using field emission scanning electron microscope (FESEM). It is found that the growth process varies from surface control to diffusion control when the deposition temperature increases from 1270 to 1350℃. The X-ray diffraction (XRD) patterns show that the SiC films have good crystallinity and strong preferred orientation. The results of the high resolution transmission electron microscopy (HRTEM) image and the transmission electron diffraction (TED) pattern indicate a peculiar superlattice structure of the film. The values of the binding energy in the high resolution X-ray photoelectron spectra (XPS) further confirm the formation of SiC.
关键词:
3C-SiC films
,
null
,
null
Mingzai WU
,
Lianzeng YAO
,
Weili CAI
,
Guowei JIANG
,
Xiaoguang LI
,
Zhen YAO
材料科学技术（英文）
Ordered ZnO nanowire arrays embedded in anodic aluminum oxide (AAO) membranes were fabricated by electrochemical deposition of Zn(NO3)2+H3BO3 solution in a boiling bath. Scanning electron microscope (SEM) and transmission electron microscope (TEM) observation results show that the polycrystalline ZnO nanowires with diameters around 100 nm were uniformly assembled into the ordered nanochannels of the AAO. The results of the investigation into photoluminescence (PL) and electronic paramagnetic resonance (EPR) measurements reveal that the interfaces between the ZnO nanowires and the pore walls of the AAO create a lot of oxygen vacancies, which are responsible for the green light emission (peaking around 512 nm) and the huge enhancement of the PL emission.
关键词:
Nanowires
,
null
,
null
李志宏
,
柳卫平
,
白希祥
,
郭冰
,
连钢
,
颜胜权
,
王宝祥
,
陆昀
,
曾晟
,
苏俊
原子核物理评论
doi:10.3969/j.issn.1007-4627.2005.01.006
利用8Li次级束测量了质心系能量7.8 MeV 2H(8Li, 9Li)1H反应的角分布, 导出了8Li(d, p)9Li反应的天体物理S因子及9Li→8Li+n虚衰变的渐近归一化系数.
关键词:
8Li(d,p)9Li反应
,
角分布
,
天体物理S因子
,
渐近归一化系数
HUANG Jianshun CHEN Junming Shanghai Institute of Metallurgy
,
Academia Sinica
,
Shanghai
,
China Research Associate
,
Shanghai Institute of Metallurgy
,
Academia Sinica
,
Shanghai 200050
,
China
金属学报(英文版)
Crystal structure of γ-Li_xFe_2O_3,inserted Li electrochemically,was studied by Moss- bauer spectroscopy together with X-ray diffraction,XPS and electrochemical method,On the insertion of Li at low current density,the crystal structure is keeping original spinel; while at higher current density or by thermal activation,owing to violent movement of Li~+ ions,part of crystal structure transforms into rock type similar to face-centered cubic structure of ferrous oxide.The transition channels during insertion of Li~+ ions and limitation of Li~+ ions inserted were discussed.
关键词:
null
,
null
,
null
Journal of Materials Research
The effect of Li(3)N additive on the Li-Mg-N-H system was examined with respect to the reversible dehydrogenation performance. Screening Study with varying Li(3)N additions (5, 10, 20, and 30 mol%) demonstrates that all are effective for improving the hydrogen desorption capacity. Optimally, incorporation of 10 mol% Li(3)N improves the practical capacity from 3.9 wt% to approximately 4.7 wt% hydrogen at 200 degrees C, which drives the dehydrogenation reaction toward completion. Moreover, the capacity enhancement persists well over 10 de-/rehydrogenation cycles. Systematic x-ray diffraction examinations indicate that Li(3)N additive transforms into LiNH(2) and LiH phases and remains during hydrogen cycling. Combined structure/property investigations suggest that the LiNH(2) "seeding" should be responsible for the capacity enhancement, which reduces the kinetic barrier associated with the nucleation of intermediate LiNH(2). In addition, the concurrent incorporation of LiH is effective for mitigating the ammonia release.
关键词:
complex hydrides;improvement;mixtures;imides;amide;h-2
MANG Weishi WANG Guozhi ZHANG Yongchang HU Zhuangqi SHI Changxu Institute of Metal Research
,
Academia Sinica
,
Shenyang
,
China Yongchang Associate Professor
,
Institute of Metal Research
,
Academia Sinica
,
Shenyang 110015
,
China
金属学报(英文版)
A rapidly solidified microcrystalline Al-Li-Cu-Mg-Zr alloy and its superplasicity have been investigated.An optimum tensile elongation of 585% was obtained at 540℃ and strain rate 1.67×10~(-2)s~(-1).The superplastic Al-Li alloy is manufaetured using thermomechanical pro- cessing:solution,overaging,warm rolling and recrystallization.Microstructural changes in thermomechanical processing and cavitation occurred during superplastic deformation have been observed.The superplastic failure of alloy may be caused mainly by nucleation and growth of cavities as well as the linkage around grains.
关键词:
superplasticity
,
null
,
null
,
null
Zhijian LIU
,
Zhiyou LI
,
Wei DUAN
,
Xuanhui QU
,
Baiyun HUANG
,
Siqi ZHANG
材料科学技术（英文）
A LI-B alloy has been prepared using a pretreated amorphous B powder and pure Li ingot as starting materials by continually slow addition of B powder and intensified stirring in the process of melting. The microstructure and the discharge characteristic of the materials have been investigated. Results show that the problem of temperature control in synthesis would be modified by means of continual addition of B powder, the Li7B6 would be more finery distributed in the metal Li by means of intensified stirring. The discharge characteristic of the Li-B alloy using amorphous B as starting materials is almost the same with that of using crystalline B.
关键词:
