X. Q. Yang
,
L. X. Huo
,
Y. F. Zhang and J. X. Yan (School of Material Science and Engineering
,
Tianjin University
,
Tianjin 300072
,
China)
金属学报(英文版)
The buckling formation and influence factors during welding thin - plated structures were investigated based on finite element methods, An engineering treatment method for prdicating the buckling distor- tion was proposed in here. It was used the equivalent applied thermal - load to simulate the welding residual stress,therefore the calculation of complex welding distoriton can be transformed into 3D elas- tic structural applied- load analyses, which can reduce the quantities of calculating works effectively. The validation of the method was verified by comparison of the numerical simulation and experimental results. The simulation of buckling distorition for side - walled structrues of paseenger train was per- formed and the calculation was in agreement with measuring results in general. It was shown that the main factors for producing the buckling were the intermittent fillet and ping the during welding the stiffened beams and columns to the panel.The existence of the free edge of panels would reduce the crit- ical buckling stress and enlarge the deflection obviously,but the continuous weld in closed frames didn' t degrade the buckling situation.
关键词:
welding buckling distortion
,
null
,
null
Journal of Materials Research
The morphology of the dark and bright regions observed by transmission electron microscopy for the Zr(64.13)Cu(15.75)Ni(10.12)Al(10) bulk metallic glass strongly depends on the ion beam parameters used for ion milling. This indicates that the ion beam could introduce surface fluctuation to metallic glasses during ion milling.
关键词:
room-temperature
Fang Geng
材料科学技术（英文）
Three-dimensional honeycomb-structured magnesium (Mg) scaffolds with interconnected pores of accurately
controlled pore size and porosity were fabricated by laser perforation technique. Biodegradable and bioactive β-
tricalcium phosphate (β-TCP) coatings were prepared on the porous Mg to further improve its biocompatibility,
and the biodegradation mechanism was simply evaluated in vitro. It was found that the mechanical properties
of this type of porous Mg significantly depended on its porosity. Elastic modulus and compressive strength
similar to human bones could be obtained for the porous Mg with porosity of 42.6%-51%. It was observed
that the human osteosarcoma cells (UMR106) were well adhered and proliferated on the surface of the β-
TCP coated porous Mg, which indicates that the β-TCP coated porous Mg is promising to be a bone tissue
engineering scaffold material.
关键词:
Magnesium
,
Bone tissue engineering
,
β-TCP coating
,
Biocompatibility
材料科学技术（英文）
Three-dimensional honeycomb-structured magnesium (Mg) scaffolds with interconnected pores of accurately controlled pore size and porosity were fabricated by laser perforation technique. Biodegradable and bioactive beta-tricalcium phosphate (beta-TCP) coatings were prepared on the porous Mg to further improve its biocompatibility, and the biodegradation mechanism was simply evaluated in vitro. It was found that the mechanical properties of this type of porous Mg significantly depended on its porosity. Elastic modulus and compressive strength similar to human bones could be obtained for the porous Mg with porosity of 42.6%-51%. It was observed that the human osteosarcoma cells (UMR106) were well adhered and proliferated on the surface of the beta-TCP coated porous Mg, which indicates that the beta-TCP coated porous Mg is promising to be a bone tissue engineering scaffold material.
关键词:
Magnesium;Bone tissue engineering;beta-TCP coating;Biocompatibility;simulated body-fluid;mechanical-properties;cancellous bone;foam;scaffolds;magnesium;hydroxyapatite;porosity;bioceramics;fabrication;ph
Y.G. Cao
,
X.Y. Sun
金属学报(英文版)
J-integral and crack opening displacement δ(COD) were important parameters for characterization of fractures in engineering materials. The relationship between J-integral and COD has been investigated for a long time and was enerally represented as J = m σyδ, where σy is the yield strength and m is a function of specimen geometry and material properties. To determine the value of m, extensive studies and experiments have been performed. The method that used the fracture-surface topography analysis (FRASTA) for determining J-integral from fracture surfaces of materials was introduced. On the basis of the relationship between COD and fracture surface average profile, the relationship between J-integral and COD was deduced and compared with the generally used equation. The method was experimentally confirmed to be able to provide a new way to determine the relationship between J-integral and COD.
关键词:
FRASTA
,
null
,
null
Acta Materialia
The glass-forming ability (GFA) and thermal stability of Nd(70-x)Fe(20)Al(10)Y(x) (0less than or equal toxless than or equal to15) alloys produced by melt spinning and copper-mold casting have been investigated. Ribbon samples in the composition range show a fully amorphous structure. Except Y=5 at.%, bulk amorphous alloys at least 2 mm in diameter were obtained. Both the amorphous ribbon and the bulk cylinder for the Nd(55)Fe(20)Al(10)Y(15) alloy show a distinct glass transition temperature and a wide supercooled liquid region before crystallization. It is suggested to use a new parameter to characterize both the GFA and the thermal stability of Nd-Fe-Al-Y alloys, showing that Nd(60)Fe(20)Al(10)Y(10) alloy is the best one both in GFA and thermal stability. The remanence (J(r)), magnetization (J(1500)), and coercivity (H(c)) for the as-cast Nd(70-x)Fe(20)Al(10)Y(x) amorphous cylinders depend strongly on the composition. The enhanced GFA and thermal stability as well as the reduction of magnetic properties are discussed. (C) 2002 Acta Materialia Inc. Published by Elsevier Science Ltd. All rights reserved.
关键词:
glass-forming ability;Nd(70-x)Fe(20)Al(10)Y(x) metallic glasses;magnetic properties;supercooled liquid region;hard magnetic-properties;bulk;amorphous-alloys;transition temperature;metallic glasses;ni alloys;cu alloys;diameter;fe;tm
Journal of Materials Research
Based on the best bulk metallic glass (BMG) forming alloy in the Mg-Cu-Y ternary system, we introduced Ag (or Ni) to partially substitute for Cu to improve the glass-forming ability (GFA). The objective of this paper is twofold. First, we illustrate in detail a recently developed search strategy, which was proposed but only briefly outlined in our previous publication [H. Ma, L.L. Shi, J. Xu, Y. Li, and E. Ma: Discovering inch-diameter metallic glasses in three-dimensional composition space. Appl. Phys. Lett. 87, 181915 (2005)]. The protocol to navigate in three-dimensional composition space to land large BMGs is spelled out step-by-step using the pseudo-ternary Mg-(Cu,Ag)-Y as the model system. Second, our ability to locate the best BMG former in the composition tetrahedron allows us to systematically examine, and conclude on, the effects of a given alloying element. The large improvement in glass-forming ability in the Mg-(Cu,Ag)-Y system relative to the based ternary will be contrasted with the reduced glass-forming ability in the Mg-(Cu,Ni)-Y pseudo ternary system. It is demonstrated that the improvement of glass-forming ability requires judicious choice of substitutional alloying elements and concentrations, rather than simple additions of multiple elements assuming the "confusion principle."
关键词:
bulk metallic-glass;shaped copper mold;amorphous-alloys;thermal-stability;ternary-system;casting method;p system;diameter;zr;mm
Journal of Testing and Evaluation
To determine residual stresses in a (flat) plate or bar with a rectangular cross-section by X-ray diffraction after removal of material, we can sectionally approximate the measured stress curve with depth using power series, then consequently evaluate the additional stresses created by removal, and finally obtain the true stress distribution with depth before the layers were removed. Formulas to evaluate corrections for stress have been derived. Two examples demonstrate that power series with few terms can provide us with an approximation good enough for the measured stress curve, and that the influence of the approximation on the corrective result is far less than that of the errors arising from the X-ray stress determination itself.
关键词:
x-ray stress determination;stress correction;approximation;power;series;single-side removal;double-side removal;shot peening
Physica B-Condensed Matter
The magnetic properties and magnetocaloric effect of Tb(1-x)Y(x)CoC(2) (x = 0, 0.1, 0.2, 0.3, 0.4) compounds have been investigated systematically. All the compounds undergo second-order transitions from paramagnetic to ferromagnetic states without thermal and magnetic hysteresis. With increasing Y content from 0 to 0.4, the Curie temperatures decrease nearly linearly from 28 to 18 K. The nature of the second-order phase transitions can be confirmed by Arrott plots. For Tb(0.6)Y(0.4)CoC(2) compound, the maximum value of the magnetic entropy change -Delta S(M) at 20 K is 9.35 J kg(-1) K(-1) for an external field change of 5T (5.14 J kg(-1) K(-1) for 2T). The large reversible magnetic entropy change makes Tb(0.6)Y(04)CoC(2) compound an attractive candidate for the application at hydrogen liquefaction temperature. (C) 2010 Elsevier B.V. All rights reserved.
关键词:
Curie temperature;Magnetocaloric effect;Magnetic properties;ac susceptibility
Materials Letters
The dynamic hysteresis in a planar X-Y model as a function of frequency and amplitude of external field, at a temperature far below its Curie point, is studied by means of Monte Carlo (MC) method. The evolution of hysteresis dispersion is simulated in details and the earlier proposed scaling on the hysteresis dispersion is confirmed in the present system. It is predicted that the unique characteristic time for domain reversal is inversely proportional to the field amplitude once the amplitude is not very small. (C) 2002 Elsevier Science B.V. All rights reserved.
关键词:
dynamic hysteresis;scaling;planar X-Y model;kinetic ising-model;magnetic hysteresis;phase-transition;films
