X.M. Yang
,
Y.S. Xie and D.G. Wang (Institute of Chemical Metallurgy
,
The Chinese Academy of Sciences
,
Beijing 100080
,
China) D.B. Huang
,
T.J. Yang and L.T. Kong (University of Science and Technology Beijing
,
Beijing 100083
,
China)
金属学报(英文版)
The reduction behavior of iron ore pellets containing carbon under non-isothermal condition in the temperature range from 573 to 1373K has been investigated in a laboratory scale setup. The test results show that carbon content has no obvious effect on reduction degree of composite pellets (C/O mole ratio=1.0) by CO in the temperature range from 575 to 1373K under linear temperature-rising program; reduction degree of iron ore pellets containing carbon is larger in 90%CO-10%CO2 mixture than that of in 100%CO atmosphere or in 80%CO-20%CO2 mixture; the s type temperature-rising program has a better effect than that of linear one to increase the reduction degree; and reduction degree of slower linear temperature-rising program is greater than that of faster one, but the final reduction degrees, i.e., those at the highest temperature are about same for various CO partial pressures or temperature-rising programs. The kinetic analysis also shows that the reduction of iron ore-carbon composite pellets by CO or CO-CO2 mixture under non-isothermal condition should be controlled 6y surface reaction, and the apparent reduction activation energy changes with the reduction progress under various test conditions.
关键词:
iron ore pellet containing carbon
,
null
,
null
,
null
,
null
LI Guodong
,
D U Ting
,
Central Iron and Steel Research Institute
,
Ministry of Metallurgical Industry
,
Beijing
,
China LI Guodong
,
Department No.16
,
Central Iron and Steel Research Institute
,
Ministry of Metallurgical Industry
,
Beijing
,
100081
,
China
金属学报(英文版)
The thermodynamic properties of Cu-Ce-S and Cu-Y-S liquid solutions were studied by the chemical equilibrium technique at 1200℃. The equilibrium constants and the standard free energies of formation of CeS and YS were determined for the reactions: CeS=[Ce]+[S] and YS = [Y]+[S] . For the solution of Ce_(1) and Y_(l) in pure Cu according to the reactions: Ce_(1)= [Ce] and Y_(1)= [Y] , the standard free energies of solutions were obtained. The first order and second order interaction coefficients between solute elements as well as the activity coefficients γ_(Ce)~0 and γ_Y~0 in liquid Cu were also determined.
关键词:
Cu-Ce-S system
,
null
,
null
王龙妹
,
杜挺
金属学报
用直接平衡法研究了1500,1550,1600℃Ni液中Y-S平衡关系,测定了钇的脱硫常数lgK_(YS)及Y,S的一阶活度相互作用系数e_S~Y与温度的关系,并进行了有关的热力学计算。由测得的数据算出Ni液中YS的标准生成自由能△G_((Y)S),钇的标准溶解自由能△G_((Y)(l)→[Y]Ni),活度系数γ_Y~o,以及钇的克原子分数自相互作用系数∑_Y~Y和百分浓度自相互作用系数e_Y~Y与温度的关系。 对于反应[Y]_(Ni)+[S]_(Ni)=YS_(s) △G_((Y)S)=-215000+95.53T(cal/mol)脱硫常数: lgK_(YS)=-47000/T+20.86 e_S~Y=-350200/T+179 △G_((Y)(l)→[Y]Ni)=126200-79.31T(cal/mol) lgγ_(Y)=27584/T-15.151 ∑_Y~Y=-127T05/T+69.79 e_Y~Y=-364.8/T+0.2018
关键词:
Zhenya Zhang
材料科学技术（英文）
This study investigated the microstructures and mechanical properties of ZK60 alloy prepared by a simplified rapid solidification powder metallurgy (RS P/M) processing system (S-RS P/M), which consists of warm press in dry air and hot extrusion. Microstructure characterizations showed that S-RS P/M alloy consisted of magnesium matrix and oxide stringers of ~1 μm in width. TEM (transmission electron microscopy) observations illustrated nano-size magnesia particles (10{30 nm) constituted oxide stringer in detail. Due to a relatively higher volume of nano-size magnesia particle produced during S-RS P/M process, 0.2% yield strength of S-RS P/M ZK60 alloy was found to be as high as 382 MPa, which is 10% higher than that of RS P/M alloy. The improvement in mechanical properties is mainly attributed to the combination effects of Orowan mechanism and coe±cient of thermal expansion (CTE) mismatch because of the approximately same average grain size.
关键词:
Microstructure
Corrosion Science
A chemical conversion treatment and an electroless nickel plating were applied to AZ91D alloy to improve its corrosion resistance. By conversion treatment in alkaline stannate solution, the corrosion resistance of the alloy was improved to some extent as verified by immersion test and potentiodynamic polarization test in 3.5 wt.% NaCl solution at pH 7.0. X-ray diffraction patterns of the stannate treated AZ91D alloy showed the presence of MgSnO3 (.) H2O, and SEM images indicated a porous structure, which provided advantage for the adsorption during sensitisation treatment prior to electroless nickel plating. A nickel coating with high phosphorus content was successfully deposited on the chemical conversion coating pre-applied to AZ91D alloy. The presence of the conversion coating between the nickel coating and the substrate reduced the potential difference between them and enhanced the corrosion resistance of the alloy. An obvious passivation occurred for the nickel coating during anodic polarization in 3.5 wt.% NaCl solution. (C) 2003 Elsevier Ltd. All rights reserved.
关键词:
AZ91D;magnesium alloy;chemical conversion;electroless nickel plating
Journal of Superconductivity and Novel Magnetism
The local structure and the g factors (g(x), g(y), and g(z)) of the Cu(2+) site in Y(2)BaCuO(5) are theoretically studied using the perturbation formulas of the g factors for a 3d(9) ion in orthorhombically elongated octahedra. The orthorhombic field parameters in these formulas are determined from the superposition model and the local geometry of the system. From the calculations, the oxygen octahedron is found to undergo the local elongation Delta Z (approximate to 0.05 angstrom) along c-axis and the relative bond length variation Delta X (approximate to 0.1 angstrom) along a- and b-axes, respectively. The calculated g factors based on the above local structure are in good agreement with the experimental data. The relationships between the anisotropies of the g factors and the low symmetrical (orthorhombic) distortions of the Cu(2+) site in Y(2)BaCuO(5) are discussed.
关键词:
Crystal fields and spin Hamiltonians;Electron paramagnetic resonance;Cu(2+);Y(2)BaCuO(5);crystal
王龙妹
,
杜挺
金属学报
由低温无水电解稀土夹杂物和固体电解质定氧活度测得Ni液中钇的脱硫氧常数与温度的关系:lgKr_2o_2s=-(33146)/T+3.85,(1500-1600℃)钇的硫氧化物在Ni液中的标准生成自由能与温度的关系:2[Y]+2[O]+[S]=Y_2O_2S_(s),(1500—1600℃)△G°=151640+17.61T(cal/mol)=-634460+73.69T(J/mol)由实验测得数据经热力学分析计算得到1600℃Ni液中[Y]-[S]-[O]平衡立体图及α_o-α_s平衡相图,为理论上预测夹杂物生成的先后次序及类型提供了依据.并给出了Ni液中加钇控制夹杂物形态公式,钇的加入量与氧,硫含量之间的函数关系.
关键词:
Dangguo LI
金属学报(英文版)
The chemical composition and semi-conductive properties of passive film on nickel-based alloy (G3 alloy) in bicarbonate/carbonate buffer solution were investigated by Auger spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), electrochemical impedance spectra (EIS) and Mott-Schottky plot. AES and XPS results showed that the passive film appeared double-layer, in which the inner film was composed of nickel oxide, the mixed nickel-chromium-molybdenum-manganese oxides were the major component of the outer film. The electrochemical results revealed that the factors including frequency, potential, time, temperature and pH value can affect the semi-conductive property, the doping densities decreased with increasing potential and pH value, prolonging time, and decreasing temperature. According to the above results, it can be concluded that the film protection on the substrate enhanced with increasing potential and pH value, prolonging time, and decreasing temperature.
关键词:
Nickel-based alloy
,
俄歇分析
,
X-射线光电子能谱
,
电化学阻抗谱
,
Mott-Schottky曲线
