H.B. Chang
,
Z.G. Li
,
T. Y. Hsu
,
Z. Y. Xu
,
and X. Y. Ruan (Department of Metallurgical Engineering
,
Shanghai Technical College of Metallurgy
,
Shanghai 200233
,
China)(Department of Plasticity Technology
,
Shanghai Jiao Tong University
,
Shanghai 200030
,
China)(Department of Materials Science
,
Shanghai Jiao Tong University
,
Shanghai 200030
,
China)
金属学报(英文版)
Proeutectoid ferrite with carbon content xo precipitating from austenite in a multicomponent steel at temperature T is supposed to be equivalent to proeutectoid ferrite with the same carbon content precipitating from austenite in Fe-C binary system at temperature T'.is described as the temperature difference of proeutectiod ferrite formation, and can be calculated from the Fe-X diagrams and the equilibrium temperature A3. By introducing Tf and basing on the thermodynamic model for Fe-C binary alloy, the driving force for phase transformation from austenite to proeutectoid ferrite in multicomponent steels has been successfully calculated. Through the Johnson-Mehl equation and using the data hem known TTT diagrams, the relationship between the chemical composition and the intedecial edenly packeter as well as activation energy for proeutectoid ferrite formation can be calculated. The starting curves of proeutectoid ferritic transformation calculated in this way in some hypo-proeutectoid structural steels agree well with the erperimental data.
关键词:
proeutectoid ferrite formation temperature difference
,
null
,
null
Applied Physics Letters
The effect of nonmagnetic Y partial substitution at the Dy site in Dy(1-x)Y(x)MnO(3) up to x=0.2 on magnetism, specific heat, and ferroelectricity is investigated, which resulted in a preliminary multiferroic phase diagram. It is revealed that the Y partial substitution suppresses the Dy-spin ordering point (T(Dy)) and ferroelectric ordering point (T(FE)) but enhances the Mn-spin ordering point (T(N)). The interaction between the spins of Dy and Mn is remarkably affected by Y substitution. The measured electrical polarization depends on the Y substitution in a complex way because the ferroelectricity is sensitive to the interaction between the spins of Dy and Mn. (c) 2011 American Institute of Physics. [doi: 10.1063/1.3536506]
关键词:
ferroelectricity;polarization
材料科学技术（英文）
The glass-forming ability (GFA) of Nd(70-x)Fe(20)Al(10)Y(x) and Nd(60-x)Fe30Al(10)Y(x) (0 less than or equal to x less than or equal to15) alloys produced by Cu mold casting was investigated. Except Y = 5 at. pct, bulk amorphous Nd(70-x)Fe(20)Al(10)Y(x) alloys up to 2 mm in diameter were obtained. The GFA for Nd(60-x)Fe(30)Al(10)Y(x) alloys, however, was found to decrease with increase of Y due to the increasing compositional deviation from the original eutectic point of Nd(60)Fe(30)Al(10) alloy. The Nd(60)Fe(20)Al(10)Y(10) and Nd(60)Fe(30)Al(10) alloy exhibit the largest GFA and can be cast into bulk amorphous cylindrical specimens of 3 mm in diameter. The melting temperature or/and the reduced crystallization temperature is closely related to the GFA of Y-containing alloys. The bulk amorphous cylinder for the Nd(55)Fe(20)Al(10)Y(15) alloy shows a distinct glass transition temperature and a wide supercooled liquid region before crystallization. The crystallization temperature, T(g), and the supercooled liquid region, DeltaT(x), are 776 K and 58 K, respectively, The GFA and thermal stability of the Nd-Fe-Al-Y alloys were discussed.
关键词:
Nd-based alloys;glass forming ability;liquidus temperature;thermal;stability;supercooled liquid region;bulk amorphous-alloys;metallic glasses;transition temperature;thermal-stability;atomic size;ni alloys;cu;alloys;diameter;tm
Andrej Atrens
材料科学技术（英文）
Corrosion research by Atrens and co-workers has made significant contributions to the understanding of the service performance of engineering materials. This includes: (1) elucidated corrosion mechanisms of Mg alloys, stainless steels and Cu alloys, (2) developed an improved understanding of passivity in stainless steels and binary alloys such as Fe-Cr, Ni-Cr, Co-Cr, Fe-Ti, and Fe-Si, (3) developed an improved understanding of the melt spinning of Cu alloys, and (4) elucidated mechanisms of environment assisted fracture (EAF) of steels and Zr alloys. This paper summarises contributions in the following: (1) intergranular stress corrosion cracking of pipeline steels, (2) atmospheric corrosion and patination of Cu, (3) corrosion of Mg alloys, and (4) transgranular stress corrosion cracking of rock bolts.
关键词:
Stress corrosion cracking
,
null
,
null
Physica B-Condensed Matter
The magnetic properties and magnetocaloric effect of Tb(1-x)Y(x)CoC(2) (x = 0, 0.1, 0.2, 0.3, 0.4) compounds have been investigated systematically. All the compounds undergo second-order transitions from paramagnetic to ferromagnetic states without thermal and magnetic hysteresis. With increasing Y content from 0 to 0.4, the Curie temperatures decrease nearly linearly from 28 to 18 K. The nature of the second-order phase transitions can be confirmed by Arrott plots. For Tb(0.6)Y(0.4)CoC(2) compound, the maximum value of the magnetic entropy change -Delta S(M) at 20 K is 9.35 J kg(-1) K(-1) for an external field change of 5T (5.14 J kg(-1) K(-1) for 2T). The large reversible magnetic entropy change makes Tb(0.6)Y(04)CoC(2) compound an attractive candidate for the application at hydrogen liquefaction temperature. (C) 2010 Elsevier B.V. All rights reserved.
关键词:
Curie temperature;Magnetocaloric effect;Magnetic properties;ac susceptibility
Materials Letters
The dynamic hysteresis in a planar X-Y model as a function of frequency and amplitude of external field, at a temperature far below its Curie point, is studied by means of Monte Carlo (MC) method. The evolution of hysteresis dispersion is simulated in details and the earlier proposed scaling on the hysteresis dispersion is confirmed in the present system. It is predicted that the unique characteristic time for domain reversal is inversely proportional to the field amplitude once the amplitude is not very small. (C) 2002 Elsevier Science B.V. All rights reserved.
关键词:
dynamic hysteresis;scaling;planar X-Y model;kinetic ising-model;magnetic hysteresis;phase-transition;films
