CHEN Shu-ying
,
YUE Xu-dong
,
JIN Guang-can
,
LI Qing-chun
,
CHANG Guo-wei
钢铁研究学报(英文版)
The behavior of inclusions in the process of δ-phase growth during the solidification of Fe-015C-08Mn steel was in-situ observed using a high-temperature confocal scanning laser microscope (HTCSLM). The results show that inclusions arrive the S/L (solid/liquid) interface by way of direct impact or gradual drift, when the cell spacing is approximately equal to 177 μm during the growth of cellular δ-phase. The inclusions easily stay at the positions of trailing vortex formed by the circumferential motion of molten steel around δ-phase. Some inclusions reaching the S/L interface are captured by the solid-phase. Some of them move along the normal direction of the S/L interface because of pushing of solid-phase, and the others get away from the S/L interface after being pushed for a distance. The faster the growth rates of the solid-phase are, the easier the inclusions are captured by the S/L interface. The slower the growth rates of the solid-phase are, the easier the inclusions move with the S/L interface.
关键词:
inclusion
,
in-situ observation
,
carbon steel
,
solidification process
,
behavior
CHANG Guo-wei
,
CHEN Shu-ying
,
LI Qing-chun
,
YUE Xu-dong
,
JIN Guang-can
钢铁研究学报(英文版)
Abstract： Growth process of δ-phase was studied during the solidification of carbon steel. Through analyzing the solute diffusion around cylindrical crystals in the melt, the mathematic representation of lateral growth rate of cylindrical crystals was confirmed; the calculation and analysis of lateral growth rate were carried out. In order to validate the theoretical calculation and analysis, the growth process of δ-phase during the solidification was in-situ observed using a confocal scaning laser microscope (CSLM) and the growth rates were measured through CSLM images. The results show that lateral growth rates of δ-phase in the carbon steel first rapidly decrease with the increase of the radius of the cylindrical crystal, and then slowly fall down or maintain invariable. The radius of δ-phase is the primary factor to affect the growth rate. The higher the temperature gradient is, the bigger the growth rate is. However, the effect of the temperature gradient is feeble. Good correlation is obtained between theoretical analysis and experiment results in absolute values of lateral growth rate and change rule.
关键词:
Key words: cell growth
,
solidification process
,
carbon steel
,
in-situ observation
李开明
,
李亚洲
,
冯维贵
,
林长
量子电子学报
doi:10.3969/j.issn.1007-5461.2007.05.014
采用非线性反馈控制,用附加了带参数的正弦项对Chen系统进行了有效的控制.随着参数k的逐渐增大,系统的动力学行为呈现出一系列的变化.数值研究结果表明:随控制参数的增大,驱动信号的强度渐大,混沌系统由混沌运动到周期轨道,最终到一相点.
关键词:
混沌
,
Chen系统
,
不动点
,
Lyapunov指数
,
反馈控制
Journal of Materials Research
The morphology of the dark and bright regions observed by transmission electron microscopy for the Zr(64.13)Cu(15.75)Ni(10.12)Al(10) bulk metallic glass strongly depends on the ion beam parameters used for ion milling. This indicates that the ion beam could introduce surface fluctuation to metallic glasses during ion milling.
关键词:
room-temperature
张鸿冰
,
倪乐民
,
徐祖耀
金属学报
经 LFG(ΔG~(γ→a))-Mogutnov(ΔG_(Fe)~(γ→a))、徐祖耀(Shu-A)(ΔG~(γ→a))-Orr-Chipman(ΔG_(Fe)~(γ→a))、徐祖耀(Shu-B)(ΔG~(γ→a))-Orr-Chipman(ΔG_(Fe)~(γ→a))组合,均可算得 Fe-Mn-C 合金的 Ms 温度且与实验值十分符合.所得结果经数学处理,得 Fe-Mn-C 系 Ms 与成分的关系为:Ms(K)=817.4-7513.4xc-4141.9x_(Mn)-32083.5x_Cx_(Mn)(LFG)Ms(K)=829.9-7580.5x_C-4166.0x_(Mn)-15727.8x_Cx_(Mn)(SHU-A)Ms(K)=829.2-7276.1x_C-2915.4x_(Mn)-43825.7x_Cx_(Mn)(SHU-B)其线性相关系数均大于0.992.C 和 Mn 浓度均使合金的 Ms 线性地降低,而碳的作用几乎是Mn 的两倍.处理中引入了合金元素交互作用项(x_Cx_(Mn)),表明 C,Mn 相互加剧对 Ms 的影响。随含 C,Mn 量的增加,相变驱动力均单调地增加,而不存在奇异点.Ms 和相变驱动力的计算值均依赖于ΔG_(Fe)~(γ→a)项.
关键词:
金属学报
Volu扣ne 27SeriesB1991AUTHOR INDEX CCAO Guanghan(曹光旱)············……6一B科6CAo weijie(曹卫恋)..················……5一B32oCAO Yilin(曹益林)··················……6一B443CHANG Xin(常听)···············……1一B48CHE Guang邻n(车广灿)·············一6一B科0CHEN Erbao(陈二保)···············……6一B410CHEN Jia....
关键词:
高诚
,
胥蕊娜
,
陈黎
,
姜培学
工程热物理学报
格子Boltzmann方法(LBM)在计算复杂结构物理模型时具有独特优势并在模拟两相流动过程中能够高效清晰捕捉相界面.本文介绍了基于Shan-Chen多相模型的格子Boltzmann方法的理论成果以及基于二氧化碳封存的超临界两相流的模拟研究.结果表明,Shan-Chen模型在模拟两相流时符合Laplace定律,且两相层流时的速度分布和相渗曲线均与理论值吻合.二氧化碳封存过程中,较大的注入速率在提高二氧化碳残余俘获量的同时会降低其化学俘获量.
关键词:
二氧化碳封存
,
超临界两相流
,
Shan-Chen模型
Journal of Materials Processing Technology
The crystallization temperatures and other thermal properties have been measured systematically for two ternary Cu-Ni-P and two quaternary Cu-Ni-Sn-P amorphous systems. The dependence of crystallization temperature on the composition for the four alloy systems can not be described basically by the usual used Naka rule. The Gibbs free energy of crystallization can be calculated for the alloy systems with the model proposed by Shu et al. Using the calculated free energy of crystallization, it is still not possible to properly describe all of the crystallization temperatures of the alloy systems. However, it has been found that the correlation between the crystallization temperature and the content of the alloy systems can be reasonably explained by the nucleation and growth rates of a new phase for the classical theory of phase transformation. It has been established that the classical theory of phase transformation can be used to describe the thermal stability of the Cu-based amorphous alloys during their crystallization process. (C) 1999 Published by Elsevier Science S.A. All rights reserved.
关键词:
thermal stability;amorphous alloys;Cu-P based alloy systems;classical;theory of phase transformation;solid-liquid interface;structural model;glasses
盖红星
,
李建军
,
韩军
,
邢艳辉
,
邓军
,
俞波
,
沈光地
,
陈建新
量子电子学报
doi:10.3969/j.issn.1007-5461.2005.01.016
采用Shu Lien Chuang方法计算了AlInGaAs/AlGaAs应变引起价带中重、轻空穴能量变化曲线,在Harrison模型的基础上详细地计算了AlInGaAs/AlGaAs和GaAs/AlGaAs量子阱电子、空穴子能级分布并且进一步研究了这两种材料在不同注入条件下的线性光增益.进一步计算比较可以得出AlInGaAs/AlGaAs应变量子阱光增益特性要优于GaAs/AlGaAs非应变量子阱增益特性,因此AlInGaAs/AlGaAs应变量子阱半导体材料应用于半导体激光器比传统GaAs/AlGaAs材料更具优势.
关键词:
光电子学
,
应变量子阱
,
光增益
,
AlInGaAs
,
半导体激光器
