Fang Geng
材料科学技术（英文）
Three-dimensional honeycomb-structured magnesium (Mg) scaffolds with interconnected pores of accurately
controlled pore size and porosity were fabricated by laser perforation technique. Biodegradable and bioactive β-
tricalcium phosphate (β-TCP) coatings were prepared on the porous Mg to further improve its biocompatibility,
and the biodegradation mechanism was simply evaluated in vitro. It was found that the mechanical properties
of this type of porous Mg significantly depended on its porosity. Elastic modulus and compressive strength
similar to human bones could be obtained for the porous Mg with porosity of 42.6%-51%. It was observed
that the human osteosarcoma cells (UMR106) were well adhered and proliferated on the surface of the β-
TCP coated porous Mg, which indicates that the β-TCP coated porous Mg is promising to be a bone tissue
engineering scaffold material.
关键词:
Magnesium
,
Bone tissue engineering
,
β-TCP coating
,
Biocompatibility
材料科学技术（英文）
Three-dimensional honeycomb-structured magnesium (Mg) scaffolds with interconnected pores of accurately controlled pore size and porosity were fabricated by laser perforation technique. Biodegradable and bioactive beta-tricalcium phosphate (beta-TCP) coatings were prepared on the porous Mg to further improve its biocompatibility, and the biodegradation mechanism was simply evaluated in vitro. It was found that the mechanical properties of this type of porous Mg significantly depended on its porosity. Elastic modulus and compressive strength similar to human bones could be obtained for the porous Mg with porosity of 42.6%-51%. It was observed that the human osteosarcoma cells (UMR106) were well adhered and proliferated on the surface of the beta-TCP coated porous Mg, which indicates that the beta-TCP coated porous Mg is promising to be a bone tissue engineering scaffold material.
关键词:
Magnesium;Bone tissue engineering;beta-TCP coating;Biocompatibility;simulated body-fluid;mechanical-properties;cancellous bone;foam;scaffolds;magnesium;hydroxyapatite;porosity;bioceramics;fabrication;ph
American Mineralogist
A natural high-pressure phase of titanium oxide with alpha-PbO2-structure has been found in omphacite from coesite-bearing eclogite at Shima in the Dabie Mountains, China. High-resolution transmission electron microscope observations have revealed an orthorhombic lattice, corresponding to alpha-PbO2-type TiO2, with cell parameters a = 0.461 nm, b = 0.540 nm, c = 0.497 nm and space group Pbcn. It occurs as nanometer-thick (< 2 nm) lamellae between multiple twinned rutile crystals, providing additional evidence of very high-pressure, metamorphism at 7 GPa, 900 degrees C. This implies subduction of continental material to a depth of more than 200 kilometers. alpha-PbO-type TiO2 could be an extremely useful index mineral for ultrahigh-pressure.
关键词:
high-pressure phase;ries crater;rutile;polymorph;titanium
Andrej Atrens
材料科学技术（英文）
Corrosion research by Atrens and co-workers has made significant contributions to the understanding of the service performance of engineering materials. This includes: (1) elucidated corrosion mechanisms of Mg alloys, stainless steels and Cu alloys, (2) developed an improved understanding of passivity in stainless steels and binary alloys such as Fe-Cr, Ni-Cr, Co-Cr, Fe-Ti, and Fe-Si, (3) developed an improved understanding of the melt spinning of Cu alloys, and (4) elucidated mechanisms of environment assisted fracture (EAF) of steels and Zr alloys. This paper summarises contributions in the following: (1) intergranular stress corrosion cracking of pipeline steels, (2) atmospheric corrosion and patination of Cu, (3) corrosion of Mg alloys, and (4) transgranular stress corrosion cracking of rock bolts.
关键词:
Stress corrosion cracking
,
null
,
null
材料科学技术（英文）
The wear and friction properties of Ti3SiC2-based materials were studied using the pin-on-disc method. The friction coefficient of Ti3SiC2-based material was not very sensitive to normal load, the steady state value, p, increased from 0.4 to 0.5 when the normal load increased from 7.7 N to 14.7 N. The wear volume for Ti3SiC2 disc increased with increasing normal load or sliding distance in the tests. The average wear rate of Ti3SiC2-based material was 9.9X10(-5) mm(3)/Nm. The debris on the Ti3SiC2 disc was essentially made up of Ti3SiC2 and steel pin materials, while the debris on the steel sliders was generally pip material. The wear mechanism was concluded as the fracture and delamination of Ti3SiC2-based materials followed by adhesive wear of steel sliders.
关键词:
Ti3SiC2;wear and friction;friction coefficient;wear volume;titanium-silicon carbide;friction
Science
Strengthening materials traditionally involves the controlled creation of internal defects and boundaries so as to obstruct dislocation motion. Such strategies invariably compromise ductility, the ability of the material to deform, stretch, or change shape permanently without breaking. Here, we outline an approach to optimize strength and ductility by identifying three essential structural characteristics for boundaries: coherency with surrounding matrix, thermal and mechanical stability, and smallest feature size finer than 100 nanometers. We assess current understanding of strengthening and propose a methodology for engineering coherent, nanoscale internal boundaries, specifically those involving nanoscale twin boundaries. Additionally, we discuss perspectives on strengthening and preserving ductility, along with potential applications for improving failure tolerance, electrical conductivity, and resistance to electromigration.
关键词:
strain-rate sensitivity;stacking-fault energy;nano-scale twins;cu-al;alloys;nanocrystalline metals;mechanical-properties;activation;volume;copper;deformation;behavior
Materials Research Innovations
Cu/Ti3SiC2 composite, a new electrofriction material, was prepared, for the first time, by PM method. The microstructure, mechanical and electrical properties of the Cu/Ti3SiC2 composites were investigated and were compared with those of Cu/graphite composites. The results demonstrated that Cu/Ti3SiC2 composites had superior mechanical properties over Cu/graphite composites. At filer content of less than 20 vol%, the electrical conductivity for Cu/Ti3SiC2 composites was higher than that for Cu/graphite composites; at high filer content, the electrical conductivity for Cu/Ti3SiC2 composites was lower than that for Cu/graphite composites because of the presence of residual pores. It was found that like Cu/graphite composite, Cu/Ti3SiC2 was a self-lubricated material. The compressive yield strength, Brinell hardness, relative ratio of compressive for Cu-30 vol% Ti3SiC2 composites are 307 MPa, 140, 15.7% respectively.
关键词:
electronfriction material;copper;Ti3SiC2;graphite;composite;self-lubricating;ti3sic2
