Dawu Xiao Yinglei Li Shisheng Hu Lingcang Cai
材料科学技术（英文）
High temperature mechanical behaviors of zirconium at high strain rate of 103 s-1 were studied by split Hopkinson pressure bar (SHPB). The influences of strain rate and temperature on the micro-structural evolution, as well as the occurrence of shear localization and subsequent fracture, were also investigated. It's found that the compressive stress-strain response depends sensitively on the applied strain rate and test temperature. Micro-structural observations revealed that the density of the twinning grains reduced as the temperature increased, and increased in response to increasing strain rate. Optical observation of the fracture surfaces showed evidence of adiabatic shear localization along the fracture planes prior to crack formation. Finally, a special form of the Zerilli-Armstrong model was used to describe the mechanical response of zirconium.
关键词:
Zirconium
,
高温
,
应变率
,
绝热剪切带
王君
,
邹家桂
,
陈政标
,
高建武
,
刘彦坤
,
张杰元
,
宋莎
绝缘材料
为解决苯乙烯和甲基苯乙烯在VPI浸渍树脂应用于风力发电机中的不足，采用不饱和聚酯亚胺、引发剂和无挥发活性稀释剂研制出116HU聚酯亚胺无挥发浸渍树脂，并对其各项性能进行了研究。结果表明：116HU聚酯亚胺无挥发浸渍树脂的常规性能满足风力发电机的要求，其耐热等级可达H级。用该树脂浸渍的风电模拟线棒具有优异的介电性能、耐湿热交变和高低温循环冲击性能及耐盐雾性能等，能满足风力发电机在极端环境运行的要求。
关键词:
聚酯亚胺
,
无挥发
,
VPI
,
风力发电机
,
耐湿热
,
耐盐雾
张黛
,
范慧俐
,
徐晓伟
,
李永寿
,
李玉萍
人工晶体学报
doi:10.3969/j.issn.1000-985X.2003.01.015
采用氮气加压加温方法,以KBH4和NH4Cl为原料,通过在相同的温度、压力条件下,向反应体系中添加和不添加少量Li3N的对比实验,研究Li3N在KBH4和NH4Cl生成BN反应中的作用.反应产物中有无hBN和cBN生成是依据反应产物的X射线衍射图谱(XRD)和傅立叶变换红外光谱(FTIR)中有无hBN和cBN物相出现确认的.谢乐公式被用于估算生成的BN的粒径.结果表明,在650℃、7MPa的反应条件下,以KBH4和NH4Cl为原料没有生成BN的反应发生.但当在原料中加入Li3N后,反应产物中有大量hBN和少量cBN生成,其中hBN的平均颗粒尺寸约为14nm.分析确认,Li3N在上述由KBH4和NH4Cl合成hBN和cBN的反应中起催化作用.而且加入Li3N后,由KBH4和NH4Cl合成BN的反应压力和时间都明显低于Hu等人的相关报道结果.
关键词:
热气压法
,
合成
,
氮化硼
,
氮化锂
,
催化作用
李志宏
,
柳卫平
,
白希祥
,
郭冰
,
连钢
,
颜胜权
,
王宝祥
,
陆昀
,
曾晟
,
苏俊
原子核物理评论
doi:10.3969/j.issn.1007-4627.2005.01.006
利用8Li次级束测量了质心系能量7.8 MeV 2H(8Li, 9Li)1H反应的角分布, 导出了8Li(d, p)9Li反应的天体物理S因子及9Li→8Li+n虚衰变的渐近归一化系数.
关键词:
8Li(d,p)9Li反应
,
角分布
,
天体物理S因子
,
渐近归一化系数
HUANG Jianshun CHEN Junming Shanghai Institute of Metallurgy
,
Academia Sinica
,
Shanghai
,
China Research Associate
,
Shanghai Institute of Metallurgy
,
Academia Sinica
,
Shanghai 200050
,
China
金属学报(英文版)
Crystal structure of γ-Li_xFe_2O_3,inserted Li electrochemically,was studied by Moss- bauer spectroscopy together with X-ray diffraction,XPS and electrochemical method,On the insertion of Li at low current density,the crystal structure is keeping original spinel; while at higher current density or by thermal activation,owing to violent movement of Li~+ ions,part of crystal structure transforms into rock type similar to face-centered cubic structure of ferrous oxide.The transition channels during insertion of Li~+ ions and limitation of Li~+ ions inserted were discussed.
关键词:
null
,
null
,
null
Journal of Materials Research
The effect of Li(3)N additive on the Li-Mg-N-H system was examined with respect to the reversible dehydrogenation performance. Screening Study with varying Li(3)N additions (5, 10, 20, and 30 mol%) demonstrates that all are effective for improving the hydrogen desorption capacity. Optimally, incorporation of 10 mol% Li(3)N improves the practical capacity from 3.9 wt% to approximately 4.7 wt% hydrogen at 200 degrees C, which drives the dehydrogenation reaction toward completion. Moreover, the capacity enhancement persists well over 10 de-/rehydrogenation cycles. Systematic x-ray diffraction examinations indicate that Li(3)N additive transforms into LiNH(2) and LiH phases and remains during hydrogen cycling. Combined structure/property investigations suggest that the LiNH(2) "seeding" should be responsible for the capacity enhancement, which reduces the kinetic barrier associated with the nucleation of intermediate LiNH(2). In addition, the concurrent incorporation of LiH is effective for mitigating the ammonia release.
关键词:
complex hydrides;improvement;mixtures;imides;amide;h-2
MANG Weishi WANG Guozhi ZHANG Yongchang HU Zhuangqi SHI Changxu Institute of Metal Research
,
Academia Sinica
,
Shenyang
,
China Yongchang Associate Professor
,
Institute of Metal Research
,
Academia Sinica
,
Shenyang 110015
,
China
金属学报(英文版)
A rapidly solidified microcrystalline Al-Li-Cu-Mg-Zr alloy and its superplasicity have been investigated.An optimum tensile elongation of 585% was obtained at 540℃ and strain rate 1.67×10~(-2)s~(-1).The superplastic Al-Li alloy is manufaetured using thermomechanical pro- cessing:solution,overaging,warm rolling and recrystallization.Microstructural changes in thermomechanical processing and cavitation occurred during superplastic deformation have been observed.The superplastic failure of alloy may be caused mainly by nucleation and growth of cavities as well as the linkage around grains.
关键词:
superplasticity
,
null
,
null
,
null
